Retrofit product design for easy injection molding manufacturing

  • Tình trạng: Closed
  • Giải thưởng: $200
  • Các bài thi đã nhận: 3
  • Người chiến thắng: dXav

Tóm tắt cuộc thi

Hello,

This project is to redesign an existing product (details attached) to make it compatible for injection molding. The existing product was designed for 3D printing and the design is not compatible for injection molding manufacturing.

In scope: basic design and curvatures. Final design must be an injection moldable design.

Out of scope: the honey comb design can be removed.

If there are more questions, please don't hesitate to ask.

Regards,

Travis

Các kĩ năng yêu cầu

Bảng thông báo công khai

  • dXav
    dXav
    • cách đây 6 năm

    ...

    • cách đây 6 năm
  • Kinated
    Kinated
    • cách đây 6 năm

    working on it and please can you make it #sealed #sealed #sealed

    • cách đây 6 năm
  • dXav
    dXav
    • cách đây 6 năm

    Hi, Do you need mold design too?

    • cách đây 6 năm
  • dXav
    dXav
    • cách đây 6 năm

    ok please check the entries

    • cách đây 6 năm
  • Travs17
    Chủ cuộc thi
    • cách đây 6 năm

    Hello, the ejection can be manual or automatic. It does not have to be in one piece as long as it is very structurally strong enough to hold 40 lbs. through the cylinder.

    • cách đây 6 năm
  • zack003
    zack003
    • cách đây 6 năm

    Does it have to be done in one piece? i was thinking about splitting it. Parting the cylinder and support from the base and molding them separately.

    • cách đây 6 năm
  • dXav
    dXav
    • cách đây 6 năm

    One more question... Will you need the ejection of the part to be manual or automatic?

    • cách đây 6 năm
  • Travs17
    Chủ cuộc thi
    • cách đây 6 năm

    Hello, no the tube can be straight.

    • cách đây 6 năm
  • dXav
    dXav
    • cách đây 6 năm

    The tube must retain the angle?.

    • cách đây 6 năm
  • piyushlovanshi
    piyushlovanshi
    • cách đây 6 năm

    Although, I am a student. According to what I know, if you try to make the whole product at once by injection moulding, it won't have as much strength as it would if 3D printed. Or else you may produce it in various parts to be assembled later on. Thanks.

    • cách đây 6 năm
  • Travs17
    Chủ cuộc thi
    • cách đây 6 năm

    Also, to clarify, if the proposal is more than one part, the product will need to be able to hold 30 lbs. multi-directionally. The base will be strapped to a tree or tree branch and a smaller pole will be inserted in the cylinder so the product needs to be durable and strong.

    • cách đây 6 năm
  • Travs17
    Chủ cuộc thi
    • cách đây 6 năm

    Thank you all for the feedback. I'm open to all ideas, design changes, and manufacturing processes. Ideally, I want as few parts as possible but understand there may be manufacturing limits. I'm not familiar with "molds with servos and pneumatic system". dXav - how does this work. Including molding tooling costs I do not want the cost of the product to exceed $7 per unit.

    • cách đây 6 năm
  • dXav
    dXav
    • cách đây 6 năm

    Hi, I need to know the manufacturing limitations that you have: If you have CNC machines, EDM machines, and regarding mold design: It is very difficult (if not impossible) to make the base be ejected, so if you are thinking In making 2 different pieces in the same mold (body and base that are going to be assembled) I need to know because you could get the mold of a single pieces applying pneumatic systems.

    On the other hand the honeycomb can be preserved.

    Feel free to contact me to discuss design.

    • cách đây 6 năm
    1. vollbrecht
      vollbrecht
      • cách đây 6 năm

      I think without changes, dXav is right. This part is impossible to make as injection-molded part.

      • cách đây 6 năm
    2. dXav
      dXav
      • cách đây 6 năm

      Yes, it is possible, I have worked on similar projects in molds with servos and pneumatic systems, but it depends on the budget that he has to make the mold.

      • cách đây 6 năm
  • Kinated
    Kinated
    • cách đây 6 năm

    Q2: Can we sperate the product into 3 main parts so it would be easy moldable ?

    • cách đây 6 năm
  • Kinated
    Kinated
    • cách đây 6 năm

    Q1: Do you want the MOLD Design or just to redesign the product to be compatible with injection molds?

    • cách đây 6 năm
  • Kinated
    Kinated
    • cách đây 6 năm

    #sealed please

    • cách đây 6 năm
  • CEC2016
    CEC2016
    • cách đây 6 năm

    Those file could not opened which you have sent.

    • cách đây 6 năm

Xem thêm bình luận

Làm thế nào để bắt đầu với cuộc thi

  • Đăng cuộc thi của bạn

    Đăng cuộc thi của bạn Nhanh chóng và dễ dàng

  • Nhận được vô số bài dự thi

    Nhận được vô số Bài dự thi Từ khắp nơi trên thế giới

  • Trao giải cho bài thi xuất sắc nhất

    Trao giải cho bài thi xuất sắc nhất Download File - Đơn giản!

Đăng cuộc thi ngay hoặc tham gia với chúng tôi ngay hôm nay!