Bộ lọc

Tìm kiếm gần đây của tôi
Lọc theo:
Ngân sách
đến
đến
đến
Loại
Nhiều kỹ năng
Ngôn ngữ
    Tình trạng công việc
    1,045 abaqus công việc được tìm thấy, giá theo USD

    need to do Friction Stir Welding Simulation & Analysis in ABAQUS

    $18 (Avg Bid)
    $18 Giá đặt trung bình
    1 lượt đặt giá

    i need thermal simulation in abaqus or ansys to simulate the temperature history resulted from the friction stir additive manufacturing process. simulation should have two part the feedstock and the based plate both are Aluminum 6061. feedstock rotates at 400 RPM and translate along the base plate at 10 inch per minute. as it rotates and tranlsates material got deposited ( additive manufacturing)

    $22 (Avg Bid)
    $22 Giá đặt trung bình
    4 lượt đặt giá

    I need someone that is professional in working with ABAQUS.

    $29 (Avg Bid)
    $29 Giá đặt trung bình
    13 lượt đặt giá

    I need someone who is professional in working with ABAQUS.

    $48 (Avg Bid)
    $48 Giá đặt trung bình
    8 lượt đặt giá

    I want to simulate the Lab test for Fire ASTM E119 on my Wall panel. The wall panel is made of 3 materials, steel , rockwool, and Fiber cement board. The boundary conditions are given in the paper below. I want someone to connect with me and explain the process

    $86 (Avg Bid)
    $86 Giá đặt trung bình
    1 lượt đặt giá

    I would like to model a reinforced concrete beam strengthened by FRP materials, and the results should match with experiment results.

    $141 (Avg Bid)
    $141 Giá đặt trung bình
    12 lượt đặt giá

    FEA analysis of steering knuckle in Abaqus software with different materials , Structural Steel, Aluminium, carbon composite

    $12 (Avg Bid)
    $12 Giá đặt trung bình
    5 lượt đặt giá
    Abaqus VUMAT Đã kết thúc left

    I am trying to write the VUMAT for hill plasticity , i have written the code and it is working for single element. when i am trying on full model of composite with layers i am getting an error of excessive distortion. so i could not not figure it out whether it is problem with code or modelling of composite plate.

    $80 (Avg Bid)
    $80 Giá đặt trung bình
    5 lượt đặt giá

    more info will b shared in chat

    $7 - $18
    Niêm phong
    $7 - $18
    9 lượt đặt giá
    abaqus expert needed, easy task Đã kết thúc left

    more info will b shared in chat

    $7 - $18
    Niêm phong NDA
    $7 - $18
    6 lượt đặt giá

    I'm working on a model on ABAQUS and I want someone who has experience in slab concrete modeling to check my work.

    $129 (Avg Bid)
    $129 Giá đặt trung bình
    8 lượt đặt giá

    4 Storey Aluminium Model under ground excitation and collection of acceleration data at the top

    $90 (Avg Bid)
    $90 Giá đặt trung bình
    8 lượt đặt giá

    hi i got my abaqus model look like joint mechanical interlock with metal to composite with adhesive layer in between which I already applied all essential information, such as material, geometry, mesh, etc, but apparently my analysis is aborted after i applied interaction and hashin criterion. So, I just want someone to fix my error and make a further analysis on the same procedure with 4 more model which i havn't create yet but it's look exactly the same (3 of them changing radius only one part to see the effect of changing design parameter and one is take the adhesive layer off to see the effect of having adhesive layer). The model is very simple and it doest take long and hard to change the sketch. i need it on 5 of october 2022

    $15 (Avg Bid)
    $15 Giá đặt trung bình
    3 lượt đặt giá
    ABAQUS Substructures Đã kết thúc left

    I am looking for someone with experience in using ABAQUS substructures for static stress analysis. The project will involve creating the ABAQUS model with substuctures. Then exporting a stiffness matrix and load vector for the retained degree of freedom for use in another software. The person will be familiar with this type of task. The initial job will be to create a demonstration model and process. I will provide detailed information if you have the capability. If this is successful there will be follow on jobs.

    $121 (Avg Bid)
    $121 Giá đặt trung bình
    14 lượt đặt giá

    Modal analysis of a housing with constrains

    $113 (Avg Bid)
    $113 Giá đặt trung bình
    3 lượt đặt giá
    CIVIL ENGINEER Đã kết thúc left

    CIVIL 3D , AUTOCAD 3D , METASHAPE, ETABS , SAP, SAFE, PRIMAVERA, PHASE2, MS-PROJECT, ABAQUS,

    $1945 (Avg Bid)
    $1945 Giá đặt trung bình
    16 lượt đặt giá

    A 3D model of a housing is given. Eigenfrequencies of the housing should be determined in Abaqus. Rotating shaft of an electric motor is considered as a sourse of vibration. The goal is to check whether the eigenfrequency of the housing is out of the operation range of the motor. The position and the operation range of the motor is given.

    $88 (Avg Bid)
    $88 Giá đặt trung bình
    17 lượt đặt giá
    Thermal Analysis of plates Đã kết thúc left

    Hi I need a CAE engineer experienced with Ansys / Abaqus to run down transient thermal Simulation.

    $76 (Avg Bid)
    $76 Giá đặt trung bình
    3 lượt đặt giá

    Hello. I want to simulate warm deep drawing of cylindrical cups with different material properties and temperature ,I dispose of all parameters but i need fast results . Have a good day

    $150 (Avg Bid)
    $150 Giá đặt trung bình
    22 lượt đặt giá

    In search of mechanical design engineer with experience in stress analysis and FEA . Needed for Composite Analysis of Thermal Stress on Ansys/Abaqus.

    $15 / hr (Avg Bid)
    $15 / hr Giá đặt trung bình
    15 lượt đặt giá
    Modal analysis in Abaqus Đã kết thúc left

    A 3D model of a housing is given. Eigenfrequencies of the housing should be determined in Abaqus. Rotating shaft of an electric motor is considered as a sourse of vibration. The goal is to check whether the eigenfrequency of the housing is out of the operation range of the motor. The position and the operation range of the motor is given.

    $151 (Avg Bid)
    $151 Giá đặt trung bình
    15 lượt đặt giá
    2D to 3D using uel in abaqus Đã kết thúc left

    using FEM software user element subroutine needs to update the project into a 3D problem. 2D problem code is available.

    $30 (Avg Bid)
    $30 Giá đặt trung bình
    3 lượt đặt giá

    i have to model shape memory alloys on reinforced concrete using Abaqus from experiemental test . to achieve the recovery of stress of Shape memory alloys using predefined field.

    $193 (Avg Bid)
    $193 Giá đặt trung bình
    24 lượt đặt giá

    I need: - Videotutorial of a circular water tank and do modal analysis - Compare the results with the housner convective and impulsive mode, used in the API 650 international standard. - All files used The expert must validate the abaqus model with the housner model. Attached image of the dimensions and properties of the tank.

    $30 (Avg Bid)
    $30 Giá đặt trung bình
    3 lượt đặt giá
    AM Modler Plugin Đã kết thúc left

    I need someone for a project who knows how to work with AM Modler Plugin in Abaqus software

    $12 / hr (Avg Bid)
    $12 / hr Giá đặt trung bình
    2 lượt đặt giá

    FEM simulation of a 0.6 mm thick Nitinol spring External diameter 4mm, total length 20mm, 1.5mm pitch undeformed (2.1mm pitch deformed) from the martensitic state plastically deformed to the state of restoration of the initial dimensions in the austenitic phase, showing all the emf maps with stress loads main stresses etc. A small description of how the model was obtained and simulated is also necessary, it is also necessary to know for that spring the load that the spring is capable of lifting if after the cold deformation in the martesitic phase it is heated bringing it to the austenitic phase.

    $33 / hr (Avg Bid)
    $33 / hr Giá đặt trung bình
    4 lượt đặt giá

    I need the tutorial of a circular water tank and do modal analysis, and compare the results with the housner convective to impulsive mode, used in the API 650 international standard. Attached image of the dimensions and properties of the tank.

    $35 (Avg Bid)
    $35 Giá đặt trung bình
    3 lượt đặt giá
    Piping ABAQUS analysis Đã kết thúc left

    analyze distribution temperature of fluid inside the pipe using ABAQUS software

    $144 (Avg Bid)
    $144 Giá đặt trung bình
    10 lượt đặt giá
    ABAQUS piping analysis Đã kết thúc left

    analyze distribution temperature in piping

    $143 (Avg Bid)
    $143 Giá đặt trung bình
    23 lượt đặt giá
    Project for Muhammad M. Đã kết thúc left

    ONLY EXPERTS AND WITH EXPERIENCE IN THIS WORK, do not make me waste my time with people who are learning. VERIFIABLE EXPERIENCE REQUIRED. Important documents are attached. Read please. ONLY THE ABAQUS SOFTWARE It is necessary to model in ABAQUS, 2 steel tanks with water inside, one of them without seismic isolation and the other with seismic isolation at the base. It is necessary to analyze the fluid-structure-seismic insulator interaction. At the base of the tank with seismic isolator, there are 2 types of seismic isolators, which must be modeled in 3D, with programmed connector elements that determine the hysteresis of the seismic isolator. There are 20 "red color" type seismic isolators and 11 "blue color" type seismic isolators. The hysteresis curve...

    $10 - $10
    $10 - $10
    0 lượt đặt giá

    I just need someone to open the 2019 file into 2020, it will prompt you to convert the file. The save it and send back to me. Need done now, please dont offer if you cant do it in the next 30 mins.

    $14 (Avg Bid)
    $14 Giá đặt trung bình
    5 lượt đặt giá
    ABAQUS Help -- 2 Đã kết thúc left

    I need somebody to help me in the next few hours to plot force-displacement from a 3-point bending model. 30 mins to 1 hour live support

    $14 / hr (Avg Bid)
    $14 / hr Giá đặt trung bình
    4 lượt đặt giá

    Basically what I want to do is to model the finite element of the reduced beam section welded connection using Abaqus software. The result would be compared to result gotten in the laboratory. Kindly study fig. 1a, 1b, 2c, fig 5 to have insight to the project.

    $26 (Avg Bid)
    $26 Giá đặt trung bình
    5 lượt đặt giá

    ONLY EXPERTS AND WITH EXPERIENCE IN THIS WORK, do not make me waste my time with people who are learning. VERIFIABLE EXPERIENCE REQUIRED. Important documents are attached. Read please. ONLY THE ABAQUS SOFTWARE It is necessary to model in ABAQUS, 2 steel tanks with water inside, one of them without seismic isolation and the other with seismic isolation at the base. It is necessary to analyze the fluid-structure-seismic insulator interaction. At the base of the tank with seismic isolator, there are 2 types of seismic isolators, which must be modeled in 3D, with programmed connector elements that determine the hysteresis of the seismic isolator. There are 20 "red color" type seismic isolators and 11 "blue color" type seismic isolators. The hysteresis curve...

    $425 (Avg Bid)
    $425 Giá đặt trung bình
    2 lượt đặt giá

    Dynamic crash analysis results for a frame designed in CATIA I have the frame as STP , IGS , CATAI want the result of the frame when it gets an accident , hitting wall at high speed , maybe 50kh/hr ,or higher want screenshots of the result ( the crash simulation ) and report of the details like the speed of frame , time of crash Using ANSYS, ABAQUS or Solidworks

    $111 (Avg Bid)
    $111 Giá đặt trung bình
    8 lượt đặt giá
    Bicycle Frame Design Đã kết thúc left

    Design Optimised Bicycle Frame Design • Bicycle frame design and development. • CAD Modelling • Drafting on CAD software. • CAE analysis of bike frame members and weld design • Motor transmission casing design on CAD • Gear, Shaft, Bearing calculations • Proficient in CAD and reading engineering drawings (In Solidworks and CATIA). • Linear and non-linear finite element simulation (ABAQUS) • Knowledge of GD&T. • Experience of FMEA (Failure Mode Effects Analysis), Kaizen/A3 (continuous improvement and problem solving) process improvement and Poka Yoke (error proofing) techniques.

    $4510 (Avg Bid)
    $4510 Giá đặt trung bình
    8 lượt đặt giá

    i have frame 3 D model , i want a car crash , dynamic simulation report of the car at speed of 40km/hr hits wall i want the screenshots of the work and results and the paramters assumed , like time of crash using ABAQUS OR ANSYS .

    $50 (Avg Bid)
    $50 Giá đặt trung bình
    6 lượt đặt giá

    We would like to simulate the sph modelling of fssw process. The journal paper we are referring is also attached.

    $56 (Avg Bid)
    $56 Giá đặt trung bình
    4 lượt đặt giá

    A VUMAT code has to be written for Abaqus. I have written the plasticity part but finding difficulty in writing damage part. So any one with Fortran and Abaqus knowledge please help me. The code should provide plasticity and damage in material .

    $18 - $153
    $18 - $153
    0 lượt đặt giá
    Project for Vincent Omondi O. Đã kết thúc left

    Hi Vincent Omondi O., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I need professional expert can make the model and analysis ABAQUS Software for NUMERICAL ANALYSIS OF MODIFIED BOLTED INTERNAL STEEL CONNECTIONS WITH ELBOW PLATES

    $250 (Avg Bid)
    $250 Giá đặt trung bình
    1 lượt đặt giá
    NUMERICAL ANALYSIS Đã kết thúc left

    I need professional expert can make the model and analysis ABAQUS Software for NUMERICAL ANALYSIS OF MODIFIED BOLTED INTERNAL STEEL CONNECTIONS WITH ELBOW PLATES

    $20 / hr (Avg Bid)
    $20 / hr Giá đặt trung bình
    9 lượt đặt giá

    Abaqus Software Mechanical Engineer Expert

    $195 (Avg Bid)
    $195 Giá đặt trung bình
    15 lượt đặt giá

    Design 2 separate beams and analyze them using Abaqus: one using retrofitting and one without retrofitting. It's civil engineer related project.

    $62 (Avg Bid)
    $62 Giá đặt trung bình
    12 lượt đặt giá

    Problem statement: 1) A chain skipping on the sprocket due to inappropriate sprocket design 2) The common materials used have limitation to withstand the loads, stress and fatigue condition of sprockets. 3) The motorcycle sprockets teeth wear out quite quickly and need a replacement. OBJECTIVE: (Using Abaqus Simulia and Fe-safe) 1) To analysis the static parameters such as stress, strain and fatigue of sprocket motorcycle at different materials using Fenite Element Method (FEM) 2) To predict the life cycles of the sprocket design.

    $21 (Avg Bid)
    $21 Giá đặt trung bình
    5 lượt đặt giá
    tensile test Đã kết thúc left

    ABAQUS and report writing 750 words

    $31 (Avg Bid)
    $31 Giá đặt trung bình
    5 lượt đặt giá

    Abaqus Software Mechanical Engineer Expert

    $39 (Avg Bid)
    $39 Giá đặt trung bình
    6 lượt đặt giá
    I need a simulation engineer Đã kết thúc left

    I want someone whos good at simulation softwares to create a simulation of the miami apartment building collapse. Preferably using AutoCad/Abaqus

    $158 (Avg Bid)
    $158 Giá đặt trung bình
    11 lượt đặt giá
    Need a Abaqus software expert Đã kết thúc left

    Need a project report on "'Axial compressive behaviour of perforated stainless steel circular hollow section member". And few graphs of load vs axial deformation

    $38 (Avg Bid)
    $38 Giá đặt trung bình
    2 lượt đặt giá

    axial compression of perforated stainless Steel structure using abaqus software

    $36 (Avg Bid)
    $36 Giá đặt trung bình
    4 lượt đặt giá

    We want to compare the advantages of auxetic embedded I-beams' properties with conventional I-beams while subjecting them under bending and buckling. We are simulating all the processes in ABAQUS CAE software.

    $32 (Avg Bid)
    Gấp
    $32 Giá đặt trung bình
    2 lượt đặt giá