Circuitmakercông việc

Bộ lọc

Tìm kiếm gần đây của tôi
Lọc theo:
Ngân sách
đến
đến
đến
Loại
Nhiều kỹ năng
Ngôn ngữ
    Tình trạng công việc
    21 circuitmaker công việc được tìm thấy, giá theo USD

    Implementing a Tic Tac Toe game using Digital Logic (DLD) Note: Only using circuitmaker software other software is not acceptable.

    $26 (Avg Bid)
    $26 Giá đặt trung bình
    3 lượt đặt giá

    Need an expert with Circuitmaker and logic aid

    $20 (Avg Bid)
    $20 Giá đặt trung bình
    8 lượt đặt giá

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker (it is all I have access to, and will be moving mount points later on, though no traces will be moved). Attached are photos of the PCB with 1.25mm grid. The PCB is set up with 4 layers. Don't want to go above this layer count. If an extra 1mm is required that is fine. Would like this done within the next few days ready for prototype manufacture.

    $48 (Avg Bid)
    $48 Giá đặt trung bình
    5 lượt đặt giá

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker (it is all I have access to, and will be moving mount points later on, though no traces will be moved). Attached are photos of the PCB with 1.25mm grid. The PCB is set up with 4 layers. Don't want to go above this layer count. If an extra 1mm is required that is fine. Would like this done within the next few days ready for prototype manufacture.

    $71 (Avg Bid)
    $71 Giá đặt trung bình
    5 lượt đặt giá
    logic design with circuitmaker Đã kết thúc left

    4-parts designing (decoder + MUX) 74LS138, 74LS153, 74LS157 ICs milestones will be divided into 5 stages, per part and then by fully completing all parts. e.g. part 1 $10 part 2 $10 part 3 $10 part 4 $10 part finished all $20 details of design will be shared to the shortlisted freelancers only after making their offers.

    $54 (Avg Bid)
    $54 Giá đặt trung bình
    5 lượt đặt giá

    I need help with finishing my PCB. I am searching for help with USB routes between my Micro USB socket and my FTDI chip. The USB routes go through 40mm FFC. I am using CircuitMaker PCB software. I can send over Gerber and JPEGs or add you to team. Should not take more than 5-10 mins.

    $28 (Avg Bid)
    $28 Giá đặt trung bình
    13 lượt đặt giá
    Project for everquinones Đã kết thúc left

    Hi everquinones! I'm looking for a freelancer to collaborate on a private Audio DSP project in CircuitMaker or DesignSpark. Do you have any spare time at the moment? David.

    $10 / hr (Avg Bid)
    $10 / hr Giá đặt trung bình
    1 lượt đặt giá

    Hello, I am an Electrical Engineer myself but my work hours are keeping me from doing a side project that I have been working on for a while. The circuit function would be that a microcontroller(STM32F030K6T6, 8MHz) asks (i2C) for current reading from a current sense IC(PAC1710-1-AIA-TR, 10mOhm Sense Resistor). Moreover, the microcontroller also control a tri color LED (SSL-LX5097SISGSYC) from a GPIO pin. Another GPIO pin of the microcontroller will also turn ON/OFF a MOSFET (BSS806N H6327) to control power on a 500mA load. Finally, Microcontroller is also connected to a capacitive touch IC (MTCH101-I/OT) to detect human touch. I would like you to use CirucuitMaker (free) from Altium and then I will add you as a team member to my project so that you can do the PCB Layout for me. As you can...

    $181 (Avg Bid)
    $181 Giá đặt trung bình
    15 lượt đặt giá
    URGENT - CircuitMaker circuit Đã kết thúc left

    Urgent - I need this done within 12 hours I would like the following circuit constructed in CircuitMaker: Using switches and lights for data input and display. The simulation must carry out the operation X + Y -> X. I also need a table of control switch settings which carry out the operation described. Please clearly label everything in the circuit so that I am able to fully understand how the circuit works.

    $30 - $40
    $30 - $40
    0 lượt đặt giá
    Basic circuit in CircuitMaker Đã kết thúc left

    I would like the following circuit constructed in CircuitMaker: Using switches and lights for data input and display. The simulation must carry out the operation X + Y -> X. I also need a table of control switch settings which carry out the operation described. Please clearly label everything in the circuit so that I am able to fully understand how the circuit works.

    $25 - $30
    $25 - $30
    0 lượt đặt giá
    Simple Circuit - CircuitMaker Đã kết thúc left

    I would like the following circuit constructed in CircuitMaker: Using switches and lights for data input and display. The simulation must carry out the operation X + Y -> X. I also need a table of control switch settings which carry out the operation described. Please clearly label everything in the circuit so that I am able to fully understand how the circuit works.

    $20 - $25
    $20 - $25
    0 lượt đặt giá
    CircuitMaker - Simple Circuit Đã kết thúc left

    I would like the following circuit constructed in CircuitMaker: Using switches and lights for data input and display. The simulation must carry out the operation X + Y -> X. I also need a table of control switch settings which carry out the operation described. Please clearly label everything in the circuit so that I am able to fully understand how the circuit works.

    $15 - $20
    $15 - $20
    0 lượt đặt giá
    CircuitMaker - Basic Circuit Đã kết thúc left

    Hi, Using the software CircuitMaker, I need 2 simple circuits designed to simulate: a) the 4-bit register with tri-state outputs 74LS173 () and b) the 4-bit ALU 74LS181. () Please use logic switches to input data and logic displays to show outputs. You should also use 4-bit data items and pathways. Also include labels so that I can fully understand how the circuit works, and so that I can investigate and study it further.

    $25 - $30
    $25 - $30
    0 lượt đặt giá
    CircuitMaker - Basic circuits Đã kết thúc left

    Hi, Using the software CircuitMaker, I need 2 simple circuits designed to simulate: a) the 4-bit register with tri-state outputs 74LS173 () and b) the 4-bit ALU 74LS181. () Please use logic switches to input data and logic displays to show outputs. You should also use 4-bit data items and pathways. Also include labels so that I can fully understand how the circuit works, and so that I can investigate and study it further.

    $30 - $40
    $30 - $40
    0 lượt đặt giá

    Hi, Using the software CircuitMaker, I need a simple circuit designed to simulate the 4-bit register with tri-state outputs "74LS173": Please use logic switches to input data and logic displays to show outputs. You should also use 4-bit data items and pathways. Also include labels so that I can fully understand how the circuit works, and so that I can investigate and study it further.

    $20 - $25
    $20 - $25
    0 lượt đặt giá
    Simple Test Layout Đã kết thúc left

    Hi, Using the software CircuitMaker, I need a simple circuit designed to simulate the 4-bit ALU 74LS181. Please use logic switches to input data and logic displays to show outputs. You should also use 4-bit data items and pathways. Also include labels so that I can fully understand how the circuit works, and so that I can investigate and study it further. I was able to find some information about the circuit by searching the internet:

    $15 - $20
    $15 - $20
    0 lượt đặt giá
    Design of 2 simple circuits Đã kết thúc left

    Hi, Using the software CircuitMaker, I need 2 simple circuits designed to simulate: a) the 4-bit register with tri-state outputs 74LS173 and b) the 4-bit ALU 74LS181. Please use logic switches to input data and logic displays to show outputs. You should also use 4-bit data items and pathways. Also include labels so that I can fully understand how the circuit works, and so that I can investigate and study it further. I was able to find some information about them both by searching the internet: a) and b) You may choose to base your circuits from the information in those documents, or you can do your own research.

    $20 (Avg Bid)
    $20 Giá đặt trung bình
    1 lượt đặt giá
    2 simple circuits designed Đã kết thúc left

    Hi, Using the software CircuitMaker, I need 2 simple circuits designed to simulate: a) the 4-bit register with tri-state outputs 74LS173 and b) the 4-bit ALU 74LS181. Please use logic switches to input data and logic displays to show outputs. You should also use 4-bit data items and pathways. Also include labels so that I can fully understand how the circuit works, and so that I can investigate and study it further. I was able to find some information about them both by searching the internet: a) and b) You may choose to base your circuits from the information in those documents, or you can do your own research.

    $20 (Avg Bid)
    $20 Giá đặt trung bình
    1 lượt đặt giá

    Hi, Using the software CircuitMaker, I need 2 simple circuits designed to simulate: a) the 4-bit register with tri-state outputs 74LS173 and b) the 4-bit ALU 74LS181. Please use logic switches to input data and logic displays to show outputs. You should also use 4-bit data items and pathways. Also include labels so that I can fully understand how the circuit works, and so that I can investigate and study it further. I was able to find some information about them both by searching the internet: a) and b) You may choose to base your circuits from the information in those documents, or you can do your own research.

    $20 - $25
    $20 - $25
    0 lượt đặt giá
    Simple test layout - 2 circuits Đã kết thúc left

    Using the software CircuitMaker, I need 2 simple circuits designed to simulate: a) the 4-bit register with tri-state outputs 74LS173 and b) the 4-bit ALU 74LS181. Please use logic switches to input data and logic displays to show outputs. You should use 4-bit data items and pathways. Also include labels so that I can fully understand how the circuit works, and so that I can investigate and study it further. I was able to find some information about them both by searching the internet: a) and b) You may choose to base your circuits from the information in those documents, or you could do your own research.

    $21 - $26
    $21 - $26
    0 lượt đặt giá
    Circuit in CircuitMaker Đã kết thúc left

    I would like the following circuit constructed in CircuitMaker: Using switches and lights for data input and display. The simulation must carry out the operation X + Y -> X. I also need a table of control switch settings which carry out the operation described. Please clearly label everything in the circuit so that I am able to fully understand how the circuit works. ## Deliverables requirements notice: As originally posted, this project does not have complete details. Should a dispute arise and this project go into arbitration "as is", the contract's vagueness might cause it to be interpreted against you, even though you were acting in good-faith. So for your protection, if you are interested in this project

    $15 - $20
    $15 - $20
    0 lượt đặt giá