Ciscocông việc

Cisco IOS Configuration and Trouble Shooting

I have a Cisco CP 8861. I have uploaded an xml config file to my tfpt server file name SEPCC79D76E9580.xml. When I access the phone via the web interface I typed this on the Profile Rule TFTP://$ I click submit all changes but the phone is not downloading the config. What am I doing wrong?

Hello, We have a Cisco Catalyst 6509 with 2x10Gbit portchannel. Sometimes there is packetloss and the interfaces show overruns and in queue drops discards. I need competent Network Engineer to fix this problem. it seems configuration related or something. already swapped out cable and xenpack ports It seems somehow also have to do with buffer. I also already modified the router buffer which helped a bit Unfortunately im not very competent with this and need help from someone. I was advised that the buffers may be full or if the cisco is limiting something. Also if you can fix it, i also need you to advertise additional 2x /24 ranges on this router. please only apply if you know this and have experience. As this will also only be paid once fixed.

This is a small project for a imaginary company Datacorp -Configure laptop1 and laptop2 with vlan100, asign the ips dynamically using the dhcp server which is also in vlan100 The ip range for vlan100 is 172.20.22.1-255 /24 The laptops should communicate with the DNS server to translate the ip (Webserver) to which should only work in https Meaning the laptops should be able to access the webpage trough router1 -Configure the controllers to have vlan110 -Configure switches with trunk (im guessing) and assign vlans in interfaces -Configure router1 with ACL to block vlans from pinging each other make router1 intervlan so it communicates from laptop vlan 100 with dns server vlan 120 router1 should have static routing to the webserver connected to router2 router1 must be connected t...

hi, this is bilal ahamed from india, im looking for expert in cisco to configure of Cisco ASR 12000/4 chasis.

I will send the changes to the biz card later today.

...provide further info to the project itself for everyone. The purpose of this application, is the ability to send a command, set of commands, config backups, visual representation of the device in question, along with LLDP info with the connected neighbor network switches and routers across the organization. This could be a challenge, due to the various amount of network device OSes (such as Cisco IOS, Extreme EXOS, Juniper JunOS, Ruckus FastIron, and so forth - all with different syntaxes and features. This system needs to be modular to support the ever growing list of network devices, OSes, and OS versions with differing features/functionality between OS versions. This means, there needs to be an easy way to update this system as time goes on with new switch/router OSes and fe...

CCNA 200-301 Dumps, networking, Cisco

I am not an IT person by any means. I am merely the end user. I need an embedded application developed for use exclusively on Cisco Webex. I have no idea about coding languages or any of the technical requirements for a Webex app nor for successful registration on the Webx App Hub. I have an old Webex Document suite program that I am still using, (it was discontinued in 2015) at the moment, but this is not sustainable. Basically, I need to have my own Webex application that will allow me to play MP3 audios in a Webex meeting as a pop up or widget so as to not change the view of the shared document, (which will be being edited at the same time as the audio is playing),on the main screen. Currently it is only possible to upload an MP3 to Webex to share with participants but it is ...

Migration from ASA to FTD. Must be expert in migration tool.

I need a networking expert to create me a simple project in cisco packet tracer about a server between a doctor and a laboratory. Files sent from the doctor to the lab should be read only by the laboratory. The building design should be two stories and other minor elements of the building should be present.

I have a 5506X Firewall that I needs an IPSec tunnel Host IP adjustment made. The Firewall recently changed its Static IP address and now we need to change the original VPN host from to new VPN host IP: We have a couple of IP addresses that we can ping on the remote site of this tunnel to confirm.

Hi, We need ongoing IT support and network engineering to assist with setting up on-site office network and IT environment setup. Someone familiar with network equipment such asks firewall gateway/hp/juniper/cisco switch & routers and have experience in wireless APP, being able to troubleshoot network issues remoted with the support fo our onsite staff. We also prefer someone have experience in cloud base solutions as Microsoft 365 etc

I need some helping setting up a Cisco ASA and a Cisco Router.

looking for an engineer that can deploy DNA Centre alliances

WS-C3750G-24TS-1U Gigabit 24 Port Cisco Switch load Web Console so that I can mange the switch in a web console or over http GUI

Need to assist in setting up C9300 series Switches with network routing, VLAN, Link aggregation and etc. The candidate must come into my office to do the job physically in Singapore.

I am looking for network engineer expert we would like to keep them mentor for our project and help us for configuration and solutions for network and guid us and learn us

This project is ISP subscriber based. When subscribers connect appropriate COA has to be applied, depending on the type of customer.

Want to setup Meraki MX85 firewall to replace cisco ASA 5512 firewall.

I currently have an ASA 5505 setup exactly as I want it and am replacing this with the Firepower which I am struggling to set up.

Cherche un cours +- 10h sur automatisation routeur switch cisco Ansible pyats

I need to adjust a IPSec VPN tunnel in a 5506 Firewall. Can provide remote access to the server via Teams and written description of the original tunnel created by CISCO. Just need to change the Static IP of the WAN Modem on our end of the tunnel.

Need to configure Policy Based Routing on Firepower 1010 using local Firepower Device Manager (not using FMC). The policy should be such that one LAN subnet should be able to access Internet through one Internet link and 2nd LAN subnet should be able to access Internet through 2nd Internet link. Please note that this configuration should be done over teams session which would be recorded for our future use. Bid only if you are comfortable with FDM.

Configure BRAS configuration as per OLD Device to New Device

I have the configuration for the cisco router on my computer in a txt file and in a cfg file. It is necessary to add this configuration to the new router

...service commitment. Maintain video conference bridge, supporting video conference equipment and work with local techs to repair/replace endpoints when required Work with the server team to make sure video servers are up to date. Apply security certificates to the required servers. Add video conference endpoints to our environment. Have expert knowledge using all unified communication platforms. (Cisco, Poly, Zoom, Blue Jeans, etc.) Keep Firm-wide and local support processes, and procedures documentation up to date Work with the AV Architecture on new build outs to apply configurations on the local video endpoints. Strong understanding of how local endpoints work with other local AV equipment in the room. Exhibit helpful, customer service-oriented attitude with team members and en...

...Mobile Device/Mobile Application management Operating System Deployment Autopilot Deployment Microsoft Defender for Endpoint Microsoft Identity and Access toolsets as they are leveraged by the Microsoft endpoint management technologies Knowledge of Microsoft 365 cloud solutions Microsoft 365 management and administration Strong knowledge of industry-standard firewalls – Fortinet, SonicWALL, Cisco ASA Strong knowledge and experience with using an RMM tool such as ConnectWise Automate. Solid understanding of TCP/IP and networking fundamentals Very strong Linux systems administration experience Very strong Windows systems administration experience Extensive experience with SAN architecture, virtualization and/or cloud-based infrastructure Experience in Okta and Pr...

Cisco FTD Configuration ( IP SLA, NAT, ACL, Routing)

we need cisco engineer to configure L3 cisco switch

Hi All, Ive got one of these devices, but its software wants to license itself against a Cisco call home server. I want to use the device for home use, so this task is to install/prepare the unit via the Console to allow me to configure it without it using these features. The work must be done remotely, TeamViewer into my PC which has the console session Thanks

I need to setup small WISP small office. No local network isp. Layer 3 network isp for less than 40 clients. I need Hardware list. We have router / switch / lte mikrotik. I will buy cisco for this setup.

Hi Mohammad Sohel R., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

I am switching my job after 9 years and the new company needs a Juniper Certified candidate. I have over 28 years experience in Computer Networks from Novell Netware, Microsoft Active Directory integrated DNS and DHCPnewer version 2019 Server, Microsoft O365, Microsoft Intune, and Nextiva VOIP, Cisco Routers and Switches, Netgear Firewall and VPN, Linksys Routers and Firewall,, Sophos Firewall XG210,, CradlePoint and the list is long. I need Juniper Certified Expert in Switching and Routing with Exam material to teach me one to one over Juniper SRX Firewall

Skills needed: We need support for our LAN. Small office with 10 staff. Experience with Cisco Meraki wireless AP and Barracuda Firewall. Adding, removing and configuring networks. Location: Westbrough MA - On site After Hours okay

Hello, Looking for video uplink help to set up Cisco sf300 managed switch in L3 mode to allow through port forwarding in router and switch communication to 3 servers (home build project) HP proliant G6 X 2 and G8x1. We would work with video uplink together to set everything up. And after the router and switch are ok to install esxi on 1 server and prepare the other for migration to esxi. + Installation of virtual machines. Skills required. Very good knowledge of servers and IT setup! Knowledge of Cisco switches Knowledge of HP proliant servers General excellent knowledge of network building Working hours GMT +1 13:00 to 20:00

I just need someone to configure my Cisco ASA 5520 for internet and dhcp function

I need an expert to review the file for me I need option 150 defined for Cisco phone to pass TFTP server

I have one public ip want to run Dhcp Nat For my network

...Intelligence Machine Learning Natural Language Processing Python C++ C# Java Ruby Golang Node.js JavaScript .NET Swift Android Shell scripting Powershell HTML5 AngularJS ReactJS VueJS Django Flask Git CI/CD (Jenkins, Bamboo, TeamCity, Octopus Deploy) Puppet/Ansible/Chef Docker Kubernetes ECS/EKS Test-Driven Development Deployment models (Canary, Blue-green, etc.) Amazon SQS RabbitMQ Kafka TCP/IP Routing (Cisco) VPN Firewalls DNS SMTP Apache IIS Nginx JBoss Tomcat Biztalk Weblogic Tibco Penetration Testing WAF Threat Intelligence Security Frameworks Digital Forensics Incident Response ELK Stack Datadog Nagios Zabbix New Relic AppDynamics Loggly Prometheus Grafana TICK stack Splunk SolarWinds IoT Gaming Robotics Augmented Reality Virtual Reality Video Streaming Speech Recognition E...

Hi Vimal, hope all is well and want to do business again. I have a need for a monitor helper app for Cisco Jabber. It will detect calls and output toast notification on the locked windows screen.

Need self registration protal but all phones get net in first connection

Hi, I'm looking for Network Architect & security expert for Firewall, Routers, Switches and security expert for a Data Center configuration. Must have prior experience in building solid network & security architecture, especially Anti DDoS configurations on Fortinet or Cisco. Thanks

Cisco Packet Tracer LAB (OSPF, OSPFv3, Port-Channel, HSRP IPV6

We have a problem with a Cisco ATA-192 that will not register with our Asterisk server. With tcpdump we can see REGISTER attempts from the ATA and a 401 response being sent back, but nothing further. We suspect it may be a NAT issue. The remote end is behind a broadband router and is NAT'd. We need a network expert that also understands Asterisk and SIP. Also, ideally how to configure a Cisco ATA-192.

Cisco Packet Tracer LAB (EIGRP, EIGRP for IPv6, Port-Channel, HSRP)

Hi Kazi N., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

Need a programmer to re-program Cisco switches on a site. This will require knowledge of Cisco-managed switches and networking.

We need someone who can program a series of Cisco managed switches, in Queens New York. This will require site visits. We know this site very well as we were the installing contractor. We need help in the programming area.

Create an enterprise network using Cisco packet tracer and write a report based on it and attacks