Geometrycông việc

This is more of help on using ANSYS workbench 12.1. I have created two ANSYS project files representing my problem of study. The problem is a cylindrical shaped part consisting of three different bodies. One of these bodies is made up of Piezo material. The problem is symmetric for now. Therefore I modeled only quarter the geometry. I tried to input the piezo command lines (piezo dielect and stress). However, it does not work (2D layer workbench project) or it works but not properly (3d-quart workbench project). Tasks: 1) How to input piezo material properties properly? How to align them with the correct directions? How to change polarization if desired? (I have placed some commands under the piezo body as to change element type) 2) How to use the model as an actuator? (Ap...

This is more of help on using ANSYS workbench 12.1. I have created two ANSYS project files representing my problem of study. The problem is a cylindrical shaped part consisting of three different bodies. One of these bodies is made up of Piezo material. The problem is symmetric for now. Therefore I modeled only quarter the geometry. I tried to input the piezo command lines (piezo dielect and stress). However, it does not work (2D layer workbench project) or it works but not properly (3d-quart workbench project). Tasks: 1) How to input piezo material properties properly? How to align them with the correct directions? How to change polarization if desired? (I have placed some commands under the piezo body as to change element type) 2) How to use the model as an actuator? (Ap...

what is asked to do is: Project: Design of a 5-storey braced frame Scope of the project 1. Frame geometry 3. Design of fully restrained beam (Bl) 4. Design of beam restrained at load points (B2) 5. Design of unrestrained beam (B3) 6. Design of column (C1) 7. Beam-to-beam connection (Bl-B2)

Description Project: Design of a 5-storey braced frame Scope of the project 1. Frame geometry 3. Design of fully restrained beam (Bl) 4. Design of beam restrained at load points (B2) 5. Design of unrestrained beam (B3) 6. Design of column (C1) 7. Beam-to-beam connection (Bl-B2) Dimensions Secondary beam B1 - 7300 Primary beam B2 - 6900 Upper floor height - 3800 Base floor height - 5000 Steel grade - S275 Floor loads - school

Project: Design of a 5-storey braced frame Scope of the project 1. Frame geometry 3. Design of fully restrained beam (Bl) 4. Design of beam restrained at load points (B2) 5. Design of unrestrained beam (B3) 6. Design of column (C1) 7. Beam-to-beam connection (Bl-B2) Dimensions Secondary beam B1 - 7100 Primary beam B2 - 6800 Upper floor height - 3700 Base floor height - 5000 Steel grade - S355 Floor loads - shop.

SketchUp Ruby Developer We are searching for a freelance SketchUp Ruby developer (or small company) with good skills in geometry export functions for long term collaboration. We are developing SketchUp export plugins for acoustic modeling (SU2CATT, SU2EASE and others).

I need a 3d model of a single jewel Im handcrafting. Once the 3d model has been made (quite simple geometry) I need photorealistic images of it in different metal materials (gold, platinum, silver). The images have to be of an impressive quality to impress customers. Once bid accepted I will forward example picture took from famous brand jewels producers. 3d set will be white with little shadows. Price other 3d model and pictures has to be incuded too.

Hello most excellent coders :) I've been working with the vector graphics drawing routines in XCode for the iPhone, iPad, iOS devices. They're just a little too slow for me, so I'm wondering if the open source project Anti-Grain Geometry can speed things up. <> Anti-Grain is a vector library in C++ so it shouldn't be too hard to port over to iOS, which can handle C++ fine. I guess it needs a buffer to draw into, and that buffer needs to be drawn to a UIView really fast using the api. I will give you my code which draws vectors using the iOS sdk, and it just needs to work similarly with Anti-Grain. It's about 100 lines of drawing code, and I have test graphics files for you. I hope it's faster, so if there are optimizations that can ...

This is a 2d Computational Geometry project using Wikobi package: see See project details in attached PDF. I need soruce code for VC++ 6.0 Please NO ESCROW payment . Buget 50$ You send me an exe of the project, I check it and if all is ok I pay. after payment you release me source code.

I need a simple 3D model of a figure, which can be seen in the attached sketch. It's supposed to look rather toy-like and is going to be animated later on, so the geometry must be correct. No texturing or animation is needed. The file type must be either 3ds max (v8) or .obj

I'm looking for someone to design a Windows Phone 7 App. It is a handyman calculator that contains several calculators: Standard Geometry Dimension Metric conversion Flooring : tile wood & laminate / Carpet Electricity Painting Plumbing Woodwork Brickwork- Tiling The main menu should look like the application "Where to ?" in the app store. Each calculator should have a background related to the used theme (ex : woodwork should have a wood background) Please let me know of your previous work.

...produced by "cutting ear" algorithm. Although they are still valid for render, it's a source of potential troubles. Therefore more "civilized" geometry (with extra vertices inside) would be really wanted. ## Deliverables 1. Overview Our app has a "polygonizer" module that is very (more 15 years) old and fully obsolete long ago. The bottlenecks are: - no any optimization (brute force). As a result an import can be processed in hours - inaccurate/wild polygons (see attached picture) produced by "cutting ear" algorithm. Although they are still valid for render, it's a source of potential troubles. Therefore more "civilized" geometry (with extra vertices inside) would be really wanted. 2. Inp...

... 4. We want to create these videos for certain study courses. These videos are based on PowerPoint slides. The courses will be in Mathematics, Physics and Chemistry to start with. We will provide you the details of the course to conduct. 1. Let us say we want to start with Geometry for Std X SSC Board Maharashtra, India. 2. Let us assume there are 10 chapters. We would want to divide each of the 10 chapters further down into “logical small byte-sized topics”. We will give you the break-up of topics to start with 3. The Powerpoint presentation is to be made for each topic. 4. Each presentation video should be of about 5 minutes duration (i.e. if you are doing the video

...start() { 23 echo -n $"Starting $prog: " 24 ulimit -S -c 0 >/dev/null 2>&1 25 RETVAL=0 26 for display in ${VNCSERVERS} 27 do 28 echo -n "${display} " 29 unset BASH_ENV ENV 30 WIDTH_HEIGHT="640x480" 31 initlog $INITLOG_ARGS -c 32 "su ${display##*:} -c "cd ~${display##*:} && [ -f .vnc/passwd ] && vncserver :${display%%:*} -geometry ${WIDTH_HEIGHT} -depth 15 "" 33 RETVAL=$? 34 [ "$RETVAL" -ne 0 ] && break 35 done 36 [ "$RETVAL" -eq 0 ] && success $"vncserver startup" || 37 failure $"vncserver start" 38 echo 39 [ "$RETVAL" -eq 0 ] && touch /var/lock/subsys/vncserver 40 } 41 42 stop() { 43 echo -n $"Shutting...

.../etc/sysconfig/vncservers 19 20 prog=$"VNC server" 21 22 start() { 23 echo -n $"Starting $prog: " 24 ulimit -S -c 0 >/dev/null 2>&1 25 RETVAL=0 26 for display in ${VNCSERVERS} 27 do 28 echo -n "${display} " 29 unset BASH_ENV ENV 30 WIDTH_HEIGHT="640x480" 31 initlog $INITLOG_ARGS -c 32 "su ${display##*:} -c "cd ~${display##*:} && [ -f .vnc/passwd ] && vncserver :${display%%:*} -geometry ${WIDTH_HEIGHT} -depth 15 "" 33 RETVAL=$? 34 [ "$RETVAL" -ne 0 ] && break 35 done 36 [ "$RETVAL" -eq 0 ] && success $"vncserver startup" || 37 failure $"vncserver start" 38 echo 39 [ "$RETVAL" -eq 0 ] && touch /var...

...for nonmathematicians. Sounds a little impossible, but it's not. The seven articles (more to come later) are for a planned new mathematics magazine. The first article will introduce differential calculus, without rigorous proof, to college level people who are not math majors. You can assume that the readers have completed math through trigonometry, but have had only a little analytical geometry and no calculus. Conveying detailed technical knowledge is less important than engendering understanding. The readers will be teaching themselves through independent study, so your presentation must be simple, clear, and complete. "Complete" in the sense that the reader should not be left wondering about loose ends that were not tied up. Each article should co...

Vui lòng Đăng Ký hoặc Đăng Nhập để xem thông tin.

Database for a Math Assessment application. Assessment based on whole numbers, Integers, Decimals, Fractions, geometry, statistics etc. Database must hold- 1. User information (name,id, pswd etc) 2. Results(holds answers) 3. admin information(admin must be as able to add new users, view results) database must be capable of generated random usernames and allow one universal password. Download results as an excel spreadheet.

This is a 6000+ sqft Bangalow to be 3D modelled, 3D Rendered with VRay. Basically what I need is 2 external perspectives with landscaping. The schematic facade in 2D will be given, however incomplete. You are free to design the facade as long as the language of the building geometry is maintained. You will be provided with 2D autocad drawing of floor plans and elevations. The timeframe for this project will be 2 weeks from the the winning bid date or the initial contact date. Summary: 1.) Total built-up: 6000+sqft 2.) Total perspectives: 2 3.) Resolution: 2000x1200 @ 150dpi Provided with: 1.) 2D AutoCad drawing of floor plans & elevations 2.) Materials intended in .jpg

...future. Games should be appropriate for students in grades 3 to 10. Some examples include: Tips : * Any arcade type game that includes basic arithmetic facts (Addition, Subtraction, Multiplication, Division, Time Table, Algebra, Geometry etc.) * Space invaders game that contains multiplication facts * A pac man game in which the ghosts represent number answers * Math based logic puzzles algebra balance scales, number puzzles, etc. * Any sort of math related learning activity Time is an issue for this project which is why we are currently looking for ready-made flash games or games that can be developed in 2-4 weeks . This

We are looking for a developer with experience in real-time image processing and pattern recognition. The ideal candidate would be comfortable taking live video data and processing it to recognize various shapes and patterns (for example, a UPC code, or other unique geometry.) This would also include overlaying graphics onto the video image. This is for mobile platforms, so efficient and optimized coding is very important. iPhone development experience is a major plus but not an absolute requirement. ## Deliverables This project is still being defined by our client and could be larger in scope and compensation based on their needs assessment. This is a proof of concept research project and will likely not be a shipping product although it could lead into a project that is.

Description Simulate the rotation of turbine in a pipe that has liquid flow in it. We will give you the geometry of the turbine and modify each time to reach optimum design for a give flow rate. Simulation must be done in ANSYS.

What we want you to do is basically content editing for texts about algebra/geometry: correct grammars, changing fonts size, style of texts and spacing as advised to best presents our contents. If English grammars are wrong, rewrite and report to us the change. If there are any missing contents, let us know, so that we can upload the content. We have about 13 x 3 x 30 pages (about 1000 pages). Each page edit will take average of 1 minutes or less to edit. We want you to get it done in 2-3 days. We are looking for an editor with perfect English grammar and basic math skills to understand our content materials. We are looking for someone who is detail oriented and meticulous and respect our deadline. No lazy or sloppy type needs apply. Also must have an excellent interne...

I need a geometry problem solved for me. See this picture I have a segment given by its start and end coordinates. and a polygon given by its vertexes. Write a method that will return the coordinates of the following 1. points of intersection of the segment and polygon. 2. coordinates of vertexes of the polygons that are located from one side of the line and from another side. we might not have any polygons created if one end of the segment in inside the polygon. the signature of the method I need would be something like that (C#) int SegmentPolyIntersect( Point segStart, // segment start Point segEnd, // segment end List<Point> polygon, // polygon vertexes out List<Point> intersectionPoints, // coordinates of the intersection points

I have 3 models of mobile phones, 2 of which have been converted from 3d studio max original files to cinema 4d and one that needs converting. I do have a copy of the 3rd file already converted but as geometry only so this may not be as useful as if you converted it yourself. I need all 3 files to be provided with all their textures re-mapped/re-created in cinema 4d (textures taken from the 3ds max originals). Please see attached screen shot of one of the already converted models, the textures already exist but they need the image maps/settings applied from 3ds max. I will provide the 2 models already converted into cinema 4d and the original 3ds max models with their textures. You will need to have the ability to texture these models and convert the 3rd model from 3ds max....

Hi, Everyone one I need some for Math help.I need math helper who knows Calculus and Geometry very well.I need helper for Junky PM for more must have good communication skills and must be available on Skype.

Vui lòng Đăng Ký hoặc Đăng Nhập để xem thông tin.

What we want you to do is basically content editing for texts about algebra/geometry: correct grammars, changing fonts size, style of texts and spacing as advised to best presents our contents. If English grammars are wrong, rewrite and report to us the change. If there are any missing contents, let us know, so that we can upload the content. We have about 13 x 3 x 30 pages (about 1000 pages). Each page edit will take average of 1 minutes or less to edit. We want you to get it done in 2-3 days. We are looking for an editor with perfect English grammar and basic math skills to understand our content materials. We are looking for someone who is detail oriented and meticulous and respect our deadline. No lazy or sloppy type needs apply.

Create 10 two-page pdf documents for each of the items below: - 10 sets (question and answer sheet) of translations - 10 sets (question and answer sheet) of reflections - 10 sets (question and answer sheet) of rotations - 10 sets (question and answer sheet) of dilations - 10 sets (question and answer sheet) of two-step transformations (e.g. a reflection then a translation, or a rotation -then a reflection, etc.) - 10 sets (question and answer sheet) of three-step transformations (i.e. where a translation, reflection and rotation must be done on each figure) A title, short instructions and a footer with the website name must be included on all pages. Freelancer must sign a Copyright Assignment form to transfer copyright to website.

...the implementation and highlighting any important features. 3) The game should be object oriented involving at least two classes. 4) The game should make use of an array of objects. 5) The game should enable some kind of user interaction. **Advanced Technical Features:** 1) Use of inheritance hierarchy and polymorphism is desirable. 2) It is also desirable to display a mastery of geometry programming, including (3D) three-dimensional work and a creative use of non-standard shapes. 3) It is desirable to show a good sense of sound manipulation. 4) You may want to incorporate images and media objects. **Assessment Criteria:** You will need to submit a processing sketch and a report. The report should consist of up to 1500 words and contain the following d...

This is going to be a simple iphone game with basic physics and collision detection. The geometry would also be simple as the game is played on a flat plane with all of the "characters" having the shape of a rock. I would like it to be created using UDK and I need to be able to implement a score system with a local leaderboard.

What we want you to do is basically content editing for texts about algebra/geometry: correct grammars, changing fonts size, style of texts and spacing as advised to best presents our contents. If English grammars are wrong, rewrite and report to us the change. If there are any missing contents, let us know, so that we can upload the content. We have about 13 x 3 x 30 pages (about 1000 pages). Each page edit will take average of 1 minutes or less to edit. We want you to get it done in 2-3 days. We are looking for an editor with perfect English grammar and basic math skills to understand our content materials. We are looking for someone who is detail oriented and meticulous and respect our deadline. No lazy or sloppy type needs apply.

Parametric design is a modem approach to product modeling, which associates engineering knowledge with geometry in the product model by means of constraints. Together with the technique of feature based modeling, it has widely affected the development of new CAD-systems. Parametric design is a method in which few variables or parameters control the remaining parameters in the design. When a value is entered for the control parameter, the software should automatically calculate the remaining parameters and creates a finished CAD drawing. As a result, any changes or modifications to the design using the parametric technique will be done quicker than redrawing required by the traditional CAD. In this project, a cabinet was designed and modeled using the parametric design technique.

We are looking for a 3D Artist to do a scene conversion from 3DSMAX 2009 to CINEMA4D 11.5 The scene is composed by 8 tileable city blocks making a total of 65 buildings, and is setup for Vray renderer. Your job will be to port the entire scene from 3DSMAX 2009 to CINEMA4D 11.5, including geometry, shaders/materials, lighting and render settings. Please, respond with an estimation of the time and effort to complete the work. We will be contracting more of these jobs on a regular basis. In short, we are looking for stable collaborators working fast and effectively.

A budding kitchen personality with a specialty in niche salads that are entirely chopped. My preference is for the initials "KC" (my name as well as the abbreviation for Kitchen Chopper) to be boldly utilized. I had this crazy notion of the upper part of the letter "K" - the right side angled segment - could so...designer! I also thought it could be cool if the "KC" could be circumscribed by a traditional handled, paddle-style cutting board. And then there was the idea of inscribing the KC in a diamond-shaped geometric figure because I read somewhere that the brain processes simple geometric figures easily and assigned dopamine (the natural narcotics in our brain's reward system) to recognizing geometry. Just a tidbit for your edification! So...

...your implementation and highlighting any important features. 3) The game should be object oriented involving at least two classes. 4) The game should make use of an array of objects. 5) The game should enable some kind of user interaction. **Advanced Technical Features:** 1) Use of inheritance hierarchy and polymorphism is desirable. 2) It is also desirable to display a mastery of geometry programming, including three-dimensional (3D) work and a creative use of non-standard shapes. 3) It is desirable to show a good sense of sound manipulation. 4) You may want to incorporate images and media objects. **Assessment Criteria:** You will need to submit a processing sketch and a report. The report should consist of up to 1500 words and contain the following ...

Have had a logo create i just needed it to be checked against the rules which govern sacred geometry. This job is not for all only if you understand what sacred geometry is and can apply it to graphics. Thanks

Vui lòng Đăng Ký hoặc Đăng Nhập để xem thông tin.

We need a skilled CAD have a specific drawing (.dxf) with a defined geometry and we need someone to conduct a finite element analysis using any of the following softwares: 1. CATIA 2. Cosmos (SolidWorks) 3. ANSYS Please note that the price should be in the range of $30 to $50. Further information concerning the analysis will be given upon the selection. Applicants sending a message with their CV will have the priority. Terms and Conditions 1. We own all copyrights to all work upon payment. All work is not to be reused in any way for any reason. 2. Payment will be delivered via Freelancer after the work is completed. 3. Only apply if you are an individual and agree to the terms and conditions above (Put “Agree” at the beginning of the message,

We have a website that delivers math practice problems to students. We would like to be able to generate the practice problems dynamically using LaTex to deliver mathematical equations and diagrams. We would like to implement a system as described in ,0 or somet...assistance in setting up the system to ensure that the images are rendered and delivered properly. Setting up the server and instructing us how to input requests to the server and accept the server outputs will count as project completion. ## Deliverables We need to be able to customize the preamble and use a sans serif font like "arev". In addition, we need to be able to use math and geometry packages that allow for generation of graphical shapes and coordinate plots. d

...ICEMCFD & Fluent ** * I have a geometry which belongs to a solar tower. <!-- --> * It's sizes are already defined. <!-- --> * I have experimental datas taken from the solar tower. The fluid analise (simulation) of the solar tower must be done using Fluent (***meshing of the geometry should be done by hexa mesh in ICEMCFD***). * The precision of the mesh should be quite high. (See details) <!-- --> * **The experimental datas and fluent's simulation results must be nearly same.** <!-- --> * You must create different fluent analyses for every image in datas at "different " including temperature, velocity and pressure. ## Deliverables **Mesh Details** * The geometry is drawn in Catia v5 ...

We need a VB6 (Visual Basic) module which reads in a DXF file and returns a simple list of the found geometry, e.g. line X1 Y1 X2 Y2, arc CX CY R A1 A2). A GUI is not necessary, only for testing. There is a working script in Python which does the job, we began to translate that but we don't have enough? time to do it ourselves. So all the algorithms are there, but in the wrong programming language. In the end we need a well documented (same level as in the Python script) VB6 source code. ## Deliverables Dear worker, as said in the brief summary we need a module which reads DXF files. The ouput shall be an array which hold an UDT of the data like this: ? Type GeometryA ? code as integer 'kind of element,? arc = 66, circle = 75, line = 83, point...

I have a simple java application that I would like to have ported to iOS. The java software is attached which should give a good idea of what will be required. The original software consists of a very rudimentary drawing application which runs an analysis of the drawn geometry as it is created. Please review the attachment and propose a specific method for accomplishing this. I would like to discuss in some detail the best approach, but feel free to use any open source libraries or frameworks you see fit.

I need an admin page or pages to Add and Edit images on specific pages of my site. I need the images to be stored in specific folders and the info for the image to be stored in MySQL DB Table. I also need the images to display in the same size box without being distorted, regardless of the dimensions of the image. (Im assuming geometry will have to be used but im not sure how to do that!)

I need a few systems created for a hobby I'm working. Unfortunately my math/graphics/geometry skills suck, and I just can't seem to produce what I need. I prefer all of these in VB.NET class libaries/DLLs, but a C/C++/etc DLL accessible from VB.NET would be acceptable. Part A. I need a system that generates equal-area rectangle textures for planets. Input is very detailed, with things like the number and size of tectonic plates, albedo factor, greenhouse factor, fault lines, atmosphere type, gravity, average equatorial temperature, diameter. Rivers are completely unnecessary. Output is a height bitmap, biome bitmap, a water level bitmap, and maybe a rain/temperature bitmap as well. Accuracy is 10km per pixel, with textures always being twice as wide as they are...

I need a Javascript that will get the latitude/longitude information from this page: The coordinates I want are the first ones, under the <geometry> tag, and above <location_type> I want the javascript to be triggered by clicking a button, then fetch those coordinates without refreshing the page, and then place the coordinates in form textfields on the page: , and I'm hoping this will be a quick job for someone out there; Would like to get the code asap. Thanks In case you can't see the page (may not be available in all countries), it is an xml with the following format: I have replaced the standard > brackets with []

Vui lòng Đăng Ký hoặc Đăng Nhập để xem thông tin.

Requirement: Code needed to construct polygon/triangles that caps a cut section view. Short Description: Do cut section on a tessellated geometry for a given plane equation. Construct the intersection polygons that closes the hole. Inputs: Geometry as set of triangles (e.g. stl file) and plane equation. Output : Polygons that caps the geometry holes. It is needed to develop platform independent C++ code like the following method. void GetCapGeometry(std::vector<float> *inputGeometryVetrices*, float *a*, float *b*, float *c*, float *d*, std::vector<float> & *outputVericesforCap*); ## Deliverables Sample Screen Shots given in the attachments.

I need lessons on the topic below for my math study guide. The target audience should be 11th and 12th graders studying for the SAT. The provider should have extensive experience instructing math and test preparation. You will also need some software to draw the geomet...checked for copyright infringement and plagiarism. Therefore, if you cannot provide work that is original, please DO NOT BID. If we discover that the work is copied, we will cancel the project, and you will not get paid. • Geometric notation • Points and lines • Angles in a plane • Triangles • Quadrilateral • Areas and Perimeter • Other polygons • Circles • Solid Geometry • Geometric Perception • Coordinate geometry • Transformation &...

Simple Ansys Project. Need a simple glass window component created and a wind load stress placed in it. The component will have to be modeled, meshed and analyzed showing the loads and stress. More information will be given. For an Ansys expert this is a simple 1 day project and i am expecting to pay around $30. a) A section describing the problem including geometry of the model and the nature of the analyses performed. b) A section describing the FE models, which will include type of element used, model size and material properties. c) Hardcopies of the final meshes showing BC’s and typical applied load (where applicable). d) A summary of FE results for all the cases analysed. e) Selected hardcopies of deformed/mode shapes and contour plots or listed results of so...