Bộ lọc

Tìm kiếm gần đây của tôi
Lọc theo:
Ngân sách
đến
đến
đến
Loại
Nhiều kỹ năng
Ngôn ngữ
    Tình trạng công việc
    9,577 gsm usb công việc được tìm thấy, giá USD
    Audio pi / arduino web platform 4 ngày left
    ĐÃ XÁC THỰC

    To create audio monitoring hardware that can identify songs and pass the...can identify songs and pass the data to a web platform to generate spread sheets on what music was played at a specific time. Hardware should consist of a pi zero w unit with Gsm hat (to pass the data) or something similar on arduino platform. Software side should be scalable.

    $1246 (Avg Bid)
    $1246 Giá đặt trung bình
    17 lượt đặt giá

    I need an Arduino script which will take a string of data (imei=744&momsn=12&transmit_time=1&iridium_latitude=1&iridium_longit...take a string of data (imei=744&momsn=12&transmit_time=1&iridium_latitude=1&iridium_longitude=1&iridium_cep=1&data=1) and sent via HTTP Post to a PHP file on a server, via a GSM Modem. The modem communicates on pins 7 and 8.

    $170 (Avg Bid)
    $170 Giá đặt trung bình
    24 lượt đặt giá

    chipKIT Max32 Digilent Microcontroller Programming with the following/not limited sensors 1. Accelerometer 2. Temperature 3. RPM [đăng nhập để xem URL] shield 5.GSM/GPRS shield [đăng nhập để xem URL] Shield 7. etc

    $253 (Avg Bid)
    $253 Giá đặt trung bình
    4 lượt đặt giá

    I need an App that can get RDBMS data and notifications from a private server and can also send data to that server. The server will be uploaded with sensor ...basic analysis on the data and send some data to app. The app user will respond back to server. the server will store the response and in turn send signal to an Arduino with GSM / GPRS module

    $234 (Avg Bid)
    $234 Giá đặt trung bình
    4 lượt đặt giá

    ...projects with the board beaglebone black Rev C. I has installed Linux Debian, wheezy distribution, 3 serial ports enabled; ttyO0, tty01, tty02, it works with a screen adafuit HDMI, USB touch screen, the software is developed with Qt5, so the file system includes a toolchain and packages for cross compiling from windows. Now I am planning to use a waveshare

    $373 (Avg Bid)
    $373 Giá đặt trung bình
    9 lượt đặt giá
    PIC USB CDC Driver for OS-X 3 ngày left
    ĐÃ XÁC THỰC

    I have firmware in C for a MikroElectronika "PIC Clicker" development board using a PIC18F47J53. It includes MikroE's USB library for CDC (USB RS232 emulation). Works fine on Windows, but on a Mac (e.g. OS-X 10.9.5) it registers a /dev/[đăng nhập để xem URL] port but doesn't communicate (hangs on host write to board). On Linux, it creates a /dev/ttyACMXX port

    $22 / hr (Avg Bid)
    $22 / hr Giá đặt trung bình
    1 lượt đặt giá

    I have firmware in C for a MikroElectronika "PIC Clicker" development board using a PIC18F47J53. It includes MikroE's USB library for CDC (USB RS232 emulation). Works fine on Windows, but on a Mac (e.g. OS-X 10.9.5) it registers a /dev/[đăng nhập để xem URL] port but doesn't communicate (hangs on host write to board). On Linux, it creates a /dev/ttyACMXX port

    $1507 (Avg Bid)
    $1507 Giá đặt trung bình
    10 lượt đặt giá

    Kernal Driver for windows 10. Kernal Driver receives a message from a USB device. Converts it to look like a message from second USB device. Send message to Application which receives messages from USB Device. Driver is to be used to allow new USb device with new id to communicate with existing Application witten in c#

    $750 (Avg Bid)
    $750 Giá đặt trung bình
    8 lượt đặt giá
    Pcb design Đã kết thúc left

    I've a project to design a pcb which has 220V AC inputs (4), 24V DC inputs (4) 12V DC inputs(2) and digital outputs(4). I need one GSM module, sim card holder, SMA antenna, speaker and microphone pins on the board. Operating voltage of the board should be 24V DC. We can choose microcontroller together and talk in detail about the rest.

    $241 (Avg Bid)
    $241 Giá đặt trung bình
    32 lượt đặt giá

    I am looking...weather data and upload to [đăng nhập để xem URL] or similar weather database: Rainfall Wind speed Wind direction Temperature Humidity Solar radiation. The station needs to have a GPRS/GSM module to allow me to access data and automatically upload to the cloud. I have a set of preferred analog and digital sensors that would be used. Thanks.

    $680 (Avg Bid)
    $680 Giá đặt trung bình
    37 lượt đặt giá
    USB 12v Trigger module for PC Đã kết thúc left

    Mini-USB dongle with a mono phono input. The phono input is a 12v trigger input.

    $365 (Avg Bid)
    $365 Giá đặt trung bình
    7 lượt đặt giá

    I need you to develop some software for me. I...developed for Windows using SQL ORACLE or what ever suitble. i need full accounts inventory costing till balance sheet. anothet feature i want is to integrate whole system with GSM .like any transaction or dispatched detail must send to mobile number whenever it happen. Looking for experienced developer.

    $1104 (Avg Bid)
    $1104 Giá đặt trung bình
    12 lượt đặt giá

    I need you to develop some software for me. I...developed for Windows using SQL ORACLE or what ever suitble. i need full accounts inventory costing till balance sheet. anothet feature i want is to integrate whole system with GSM .like any transaction or dispatched detail must send to mobile number whenever it happen. Looking for experienced developer.

    $1275 (Avg Bid)
    $1275 Giá đặt trung bình
    12 lượt đặt giá

    I need to develop a library to interface an Arduino (UNO R3 or Leo) as USB HID haptic device. While basic USB HID gamepad library for Arduino exists in open source universe, I need one with Force feedback support. So in effect I should be able to program an Arduino so that when connected to a PC it should be read as a HID Gamepad with force feedback

    $995 (Avg Bid)
    $995 Giá đặt trung bình
    10 lượt đặt giá
    Pi and web platform Đã kết thúc left

    ...developed along with pi programming. The web platform and pi system should interact. The system consists of: 1 x web platform for capturing data and documents. 1 x pi zero w with gsm unit and 3 color waveshare e- ink screen 7.5 Users should capture data on the website or alter the state of data (true / false). The pi zero w will fetch this data and display

    $1322 (Avg Bid)
    $1322 Giá đặt trung bình
    31 lượt đặt giá

    want Tshirt of my own brand in 120 gsm pre shrink soft cotton cloths 25 piece of each design. design will be provided. only Indian manufacturer. price of each Tshirt should be around Rs 60 to Rs 90 i.e for 25 pieces price should be 1500 to 2250. after that we will order in bulk. and we will provide many design to make.

    $73 (Avg Bid)
    $73 Giá đặt trung bình
    6 lượt đặt giá

    I have api on localhost that send hello world message in json. It has been tested on Chrome Postman extension and works. I want to access tha...localhost that send hello world message in json. It has been tested on Chrome Postman extension and works. I want to access that JSON data from localhost on real device through USB. Have you done it before?

    $3 / hr (Avg Bid)
    $3 / hr Giá đặt trung bình
    3 lượt đặt giá
    Project for Umair A. Đã kết thúc left

    HI I'm back now how are you we need LED ON WHEN NO GSM SIGNAL, Continuously in real time

    $100 (Avg Bid)
    $100 Giá đặt trung bình
    1 lượt đặt giá

    ...information in favorite list - customer can search for doctor by location, doctor name, doctor category - customer click on the phone number of the doctor to make a phone call - GSM call - Admin can create/manage/modify/delete location - Admin can create/manage/modify/delete category - Admin can create/manage/modify/delete doctor - Admin can create/manage/modify/delete

    $2139 (Avg Bid)
    $2139 Giá đặt trung bình
    103 lượt đặt giá
    $9 Giá đặt trung bình
    1 lượt đặt giá

    I need someone to develop a python-based project for Raspberry Pi or Orange Pi and SIM800L GSM module. To scan and log neighbors BTS information using “AT+CENG “ AT command. This info will be used to get decision to turn on and off a relay. And all this will be managed in a small web interface.

    $118 (Avg Bid)
    $118 Giá đặt trung bình
    4 lượt đặt giá

    Some years ago, I started a project to build a USB Audio DAC to connect to a computer and listen to music. The DACs are based in Arduino and WM8741 chips. I also made an Android APP to control the DAC with Arduino Bluetooth connection, the problem is I do not have time to evolve the project, and I need qualified help.

    $114 (Avg Bid)
    $114 Giá đặt trung bình
    9 lượt đặt giá

    For my 3amp, 18w ultra fast smart phone charger with single USB slot, I want mass production of it for minimum 1000 quantities. And for reference here I have attached sample images with dimension and my aim is to go for readily available mold with nearly same dimension and shape so as to save cost for die making process involved in it. So in order to

    $99 (Avg Bid)
    $99 Giá đặt trung bình
    15 lượt đặt giá

    We are building an IOT product (hardware) which would handshake with an android / windows runtime (application) via BLE, WiFi, USB (one of them at a time). After connecting with one or more devices, the runtime would send requests to these nodes retrieving data from a database. It would also display data based on the response received from the nodes

    $357 (Avg Bid)
    $357 Giá đặt trung bình
    8 lượt đặt giá

    Raspberry Pi 3b+ to reliably detect human beings and faces in both day and night conditions and in any environment. When a human body or face is detected a vide...required to access anytime. All work to be carried out via VNC (or similar) directly with Pi. This exact hardware used is Rasberry 3b+ with 32gb sd Pi Cam v2.1 Sim 800L GSM ESP-12 TE873

    $287 (Avg Bid)
    $287 Giá đặt trung bình
    17 lượt đặt giá

    I would want a firmware developed on ESP 32 that would have Wifi, BLE, USB communication to external environment (Phone / Cloud) and would communicate with a CAN enabled system such as a vehicle on the other side. The firmware should also have mesh network enabled. Can discuss more details on the project personally. Would prefer a developer from the

    $1178 (Avg Bid)
    $1178 Giá đặt trung bình
    10 lượt đặt giá
    PCB - GSM - Modbus alarm board Đã kết thúc left

    I need a PCB board which is sending SMS to a telephone. This SMS should be the message of the Modbus alarm code It should also be sent a SMS when power is off. The number on which should be sent, should be configured about a SMS sent to the SIM of the PCB. At first I need 5 prototypes and then I need 1000 piece for first order. Price per piece for prototype should be under 50$ Price per piece for...

    $554 (Avg Bid)
    NDA
    $554 Giá đặt trung bình
    23 lượt đặt giá

    I want to build a system by which when user uploading pdf files to serve(PHP and Mysql) using form ...uploading pdf files to serve(PHP and Mysql) using form submit from browser then before uploading files to serve they should get signed with digital certificate stored in smart card (USB Token). This should work in windows as well as linux environment.

    $285 (Avg Bid)
    $285 Giá đặt trung bình
    5 lượt đặt giá
    WIEGAND ACCESS CONTROLLER Đã kết thúc left

    NEED CODE FOR WIEGAND DOOR CONTROLLER WITH GSM The Wiegand Controller needs to support magnetic stripe cards and keypad at the same time It should also support GSM Info over in messages

    $631 (Avg Bid)
    $631 Giá đặt trung bình
    8 lượt đặt giá

    The original logo is upload like Mobitel Service GSM The name is MobiTel and sloan: Service Autorizat GSM or Service Telefoane GSM The colors must be the same like in old logo, green and blue, aslo black. The logo must be very simple, one smartphone with broken glass and the screw inside

    $53 (Avg Bid)
    $53 Giá đặt trung bình
    88 lượt đặt giá

    ... 1. My phone will have the GSM SIM in it. When I start the call forwarding application, it should ask me the number that all incoming calls need to be forwarded to. 2. Now when any call comes, it should receive that call and play a default dial tone or sound. 3. In the backend, it should initiate a new call using the GSM SIM in phone and dial the number

    $246 (Avg Bid)
    $246 Giá đặt trung bình
    8 lượt đặt giá

    dispongo de todo el hardware para realizar la configuracion, solo requiero desde mi negocio poder real...de todo el hardware para realizar la configuracion, solo requiero desde mi negocio poder realizar llamadas desde las extensiones locales hacia el exterior usando las lineas GSM. Dispongo de un servidor con ubuntu server, 4 linksys pap2, y un goip8

    $144 (Avg Bid)
    $144 Giá đặt trung bình
    6 lượt đặt giá
    Lifesaverinc Đã kết thúc left

    ...projeto baseasse em : sensor de batimentos e oximetro max 30100, transmissor e receptor rf433 e modulo gsm siml800 e 2 arduinos. Preciso que 1 arduino envie para o outro os dados do sensor de batimentos via rf para o outro arduino cujo vai estar o modulo gsm, e quando solicitar via push button, enviar um sms com os dados do sensor...

    $115 (Avg Bid)
    $115 Giá đặt trung bình
    4 lượt đặt giá

    ...call. 16 call in 1 minute. LIKE THIS ONE. [đăng nhập để xem URL] My sms modem is: [đăng nhập để xem URL],searchweb201602_5_10065_10068_318_319_317_10

    $25 (Avg Bid)
    $25 Giá đặt trung bình
    2 lượt đặt giá

    Looking for a LBS provider who can immediately offer VLR lookup service that will return the LAC code and the CID of a MSISDN number aka you ...Manual or automatic interface. In case you are able to immediately provide a demo lookup you are welcome to bid. Price per query, or negotiable use of API. Skills required: GSM Geolocation SS7 Signalling Tier1

    $322 (Avg Bid)
    $322 Giá đặt trung bình
    2 lượt đặt giá
    Gsm voip gatway Đã kết thúc left

    I need an Android app. I would like it designed And Build Android application make mobile phone act as GSM to voip gateway To connect with Asterisk PBX We needs to use an android cellphone as an asterisk channel/Gateway. His aim is to make phone calls using his Asterisk PBX through a cellphone running android. It aim to make phone calls using

    $1162 (Avg Bid)
    $1162 Giá đặt trung bình
    16 lượt đặt giá

    For my charger manufacturing business, I need smartphone charger cabinet or enclosure designer and manufacturer and initially I need to get single USB charger cabinet manufactured and material to be used should be of high quality like premium PC materials with its features like heat resistant, fire resistant, drop resistant, corrosion resistant, compact

    $77 (Avg Bid)
    $77 Giá đặt trung bình
    26 lượt đặt giá
    Opt-in widget - Infobip.com API Đã kết thúc left

    ...reseller of [đăng nhập để xem URL] SMS service in my country and I want to offer to my clients Opt-in widget (HTML code) that they can add to their website to offer clients to opt-in on their GSM marketing list. Each of my clients have their own username and password to access the [đăng nhập để xem URL] account. I am looking for someone who is good with SMS Api, and someone

    $177 (Avg Bid)
    $177 Giá đặt trung bình
    10 lượt đặt giá
    Industrial design Đã kết thúc left

    To design the smallest wristband that can accommodate: Wi-Fi, NFC, GSM modules and battery for 24h use.

    $23 (Avg Bid)
    $23 Giá đặt trung bình
    13 lượt đặt giá
    Regain Mailer Đã kết thúc left

    Attached is a word doc that i need formatted into a mailing document that i can send through the post. There are two uses on t...the cut paper - both front and back. Whether it is done in word or other format doesn't matter as long as i can print it off my office Xerox printer which handles up to 300 gsm. I need to open it in my ms office etc program

    $50 (Avg Bid)
    $50 Giá đặt trung bình
    22 lượt đặt giá

    I want to do a real-time iot app. The platform will be parse server. 1-) The sim7000e (simcom) gsm module connects to the arduino internet (to be programmed with nodejs). 2-) Arduino Parse will send data to server platform. (to be programmed with nodejs) 3-) Client will monitor the data in real time. (to be programmed with nodejs) 4-) The parse will

    $160 (Avg Bid)
    $160 Giá đặt trung bình
    4 lượt đặt giá

    We have built a POS system and we have one element outstanding which is to print a receipt on our EPSON terminal printer locally on USB. We need source code which will first detect the default printer and print a certain document . A tip would be using QZ which can be found on [đăng nhập để xem URL]

    $210 (Avg Bid)
    $210 Giá đặt trung bình
    5 lượt đặt giá

    I will supply an APK that was wrote to work on a native android device with NFC reader and i need to be adapt to an Android device that have a USB NFC reader. i will provide the reader drivers from the USB NFC reader.

    $453 (Avg Bid)
    $453 Giá đặt trung bình
    9 lượt đặt giá

    i need code that switches over tracking services...if gps shield does not have service use gsm sim longitude and latitude to update tracking...to MySQL database

    $6 / hr (Avg Bid)
    $6 / hr Giá đặt trung bình
    10 lượt đặt giá

    A freelancer is need to write a USB mass media interface for legacy MS-DOS. This should be coded in C++ using the OpenWatcom compiler. The program will need to be written as a 32-bit protected mode executable. Along with the program, a test program should be provided. The test program should also be compiled as a 32-bit protected mode program. The

    $336 (Avg Bid)
    $336 Giá đặt trung bình
    6 lượt đặt giá
    IOT development Đã kết thúc left

    Must be proficient in EE and software development. I am looking for someone to build a concept within the IOT space. This will be utilized to monitor d...someone to build a concept within the IOT space. This will be utilized to monitor different devices within the healthcare industry. I am look to have an adhesive translucent GSM based module built

    $1234 (Avg Bid)
    $1234 Giá đặt trung bình
    36 lượt đặt giá

    ...support for NGOs and association‘s meetings. Help for student Masters or thesis or study of a project, for students, researchers and professionals. arfaouisouhail22@[đăng nhập để xem URL] - gsm: 22 046 269...

    $536 (Avg Bid)
    $536 Giá đặt trung bình
    16 lượt đặt giá

    PCIE USB 3.1 and 10 GB Ethernet card with trigger, Galvanic Isolation and drivers. 3D cad drawing a electrical simulations as part of delivery.

    $692 (Avg Bid)
    NDA
    $692 Giá đặt trung bình
    12 lượt đặt giá

    Looking for a Linux sysadmin who have experience with serial port settings, serial communication. I want to use Neoway M590E GSM/GPRS modem with USB-UART serial converter, looks like everything okay, but I can't communicate with the modem over terminal. I already tested the communication with the modem under Windows, everything fine, working. You need

    $17 (Avg Bid)
    $17 Giá đặt trung bình
    7 lượt đặt giá