Stainless steel countertopscông việc

Bộ lọc

Tìm kiếm gần đây của tôi
Lọc theo:
Ngân sách
đến
đến
đến
Loại
Nhiều kỹ năng
Ngôn ngữ
    Tình trạng công việc
    11,746 stainless steel countertops công việc được tìm thấy, giá USD

    Hey I need an expert in the field of Rehabilitation of concrete and steel constructions and building The candidate must know and have knowledge and experience in for example: Codes and Standards Assessment of existing structures ISO_16311-1 ISO_16311-2 ISO_16311-3 ISO_16311-4 SS_ISO_13822_2010_EN

    $50 (Avg Bid)
    $50 Giá đặt trung bình
    1 lượt đặt giá
    Crank extension 6 ngày left

    Hi im jon i am doing a engine conversion on my t4. On my pitcher the bit that is on the front that tapers down to 34mm needs to be cut into the back made from mild steel.

    $170 (Avg Bid)
    $170 Giá đặt trung bình
    3 lượt đặt giá
    Quick cash 5 ngày left

    Two parts needed. First part, male 1/4” bsp threaded 7mm outside diameter tube 20” long (ideally able to take high pressure and made of stainless steel) Seconded part, male 1/4” bsp threaded 6.5mm inside diameter tube 20” long (ideally able to take high pressure and made of stainless steel)

    $214 (Avg Bid)
    $214 Giá đặt trung bình
    16 lượt đặt giá
    Designing Proposal for trailer layout 5 ngày left
    ĐÃ XÁC THỰC

    In a trailer comes a pumpsquid. Pump needs above top level of IBC tank. In this frame becomes room for storrage of supplies. Leakbox under complete frame. Trailer floor must be keep clean as possible. A IBC tank/container needs to be on axles of the trailer (bet bhind middle for ballance) and must be loaded with a forklift. Steelplate on floor, guidance rails/angle/sq iron. In front it must slide...

    $57 (Avg Bid)
    $57 Giá đặt trung bình
    7 lượt đặt giá

    Choose Steel structure members, load estimation, its analysis and design in accordance with Australian standards. Preparing drawings for approval from RPEQ and fabrication drawings.

    $123 (Avg Bid)
    $123 Giá đặt trung bình
    28 lượt đặt giá

    Steel structure load estimation, its analysis and design in accordance with Australian standards. Preparing drawings for approval from RPEQ and fabrication drawings.

    $7 - $22
    $7 - $22
    0 lượt đặt giá
    Trophy icon Business Logo Design 5 ngày left

    LK Welding & Fabrication LLC is the business name and must be included in design The Business is involved in Machining, Welding, Repair, Fabrication, Steel and Aluminum Welding, and steel sales I have included an image that the customer likes and please don't use that logo.

    $50 (Avg Bid)
    $50
    144 bài tham dự

    I am in the process of purchasing a new house and require a landscaping plan for the front yard. The property includes two adjacent blocks. The house is on one block, and the other block has well established gardens and hedges from midway down to the back. The property originally had a front fence, and gardens, and the fence was removed, which also means the front yard and gardens need a complete ...

    $147 (Avg Bid)
    $147
    2 bài tham dự

    I would like to put a per-engineered, steel, agricultural building on my property and frame out an apartment / condo unit inside. I have a sketch of my idea on graph paper but I need help converting this to a drawing that I can present to the county to get a building permit. I also need to make sure my dimensions are right (that the design works and flows well) and will eventually want to do a 3D ...

    $150 (Avg Bid)
    $150 Giá đặt trung bình
    28 lượt đặt giá

    rocket engine design with analysis read for additive manufacturing, 316L stainless steel

    $415 (Avg Bid)
    $415 Giá đặt trung bình
    8 lượt đặt giá

    We are a producer of custom-made stainless-steel slides (tunnel slides, evacuation slides, water slides). For larger and more complicated projects we would need pre-production analysis to verify acceleration, average and maximum speed, curvature of turns etc. For example, safety standards allow for a specific type of water sldies allow for maximum average speed of 5 m/s and maximum speed of 8 m/s....

    $129 (Avg Bid)
    $129 Giá đặt trung bình
    15 lượt đặt giá
    Architect for House Plan and 3D Elevation 4 ngày left
    ĐÃ XÁC THỰC

    We are going to make a house on 29' x 56' plot(front 29'). We need an architect who will have following duties Layout of Plan including arrangement of bedroom, bathroom, drawing room and living room Columns, Beams and Steel Structure with every detail Doors and Windows location along with their height, width and sill Location of lights and fans Elevation 3D The requirement for hou...

    $171 (Avg Bid)
    $171 Giá đặt trung bình
    29 lượt đặt giá

    I have 2 jobs needed to be done. 1. 3D Design for steel structure elevator 2. Flyer/Leaflets for our promotional offer

    $137 (Avg Bid)
    $137 Giá đặt trung bình
    37 lượt đặt giá

    Business name is Precise Steel Detailing . We do Structural Steel SHop Drawings. We deal with steel fabrication companies. I am looking for a catchy logo design for this business.

    $47 (Avg Bid)
    $47 Giá đặt trung bình
    140 lượt đặt giá
    Trophy icon Product Advertisement Flyer Đã kết thúc left

    I am looking to advertise three products on one flyer which includes a dumbbell, bumper plate, and olympic weight plate. The brand is “CARPE DIEM” and this is Latin for “SIEZE THE DAY”. I have attached some photos of the products, some photos of fonts for Seize the Day which caught my attention. I have attached a flyer from another company which is for an example. I am also...

    $60 (Avg Bid)
    $60
    24 bài tham dự

    Our idea is that we are going to provide an auction platform for our customers to provide our Steel lot. Customers can check product picture, product list with the product description and start price, bite price. for participation, the customer should have their company legal document and bank details that should be confirmed once the customer signs up for their ID. and for participation, the auct...

    $233 (Avg Bid)
    $233 Giá đặt trung bình
    5 lượt đặt giá

    Hi N Richard D., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I would like to design a steel structural member ( Test Crown ) with a load carrying capacity of about 4000 tons. I have pictures of similar job. The work is not much and will have to be done in 2-3 days. Best Regards Siddhartha

    $134 (Avg Bid)
    $134 Giá đặt trung bình
    1 lượt đặt giá

    Hi Arsalan A., See attached project that would be great if you were interested. Also have a 5 storey steel and concrete apartment that wants modelling in ETABS or SAP and run through a modal response analysis. Would you be up for that? Lets chat. I'm new to this freelancer, but I assume you can txt me back and discuss?

    $5 / hr (Avg Bid)
    $5 / hr Giá đặt trung bình
    1 lượt đặt giá

    steel composite column Hollow column design

    $20 (Avg Bid)
    $20 Giá đặt trung bình
    2 lượt đặt giá

    Hi, I am a retired heavy earth moving and mining diesel mechanic with 40 something years of experience. I am a competent welder & have designed & built many things out of my head. I am now growing ginger on a small farm in Far North Queensland. I have purchased a machine to harvest the ginger. It has a strait cutting edge that cuts under the ginger & lifts the dirt with the ginger in ...

    $15 / hr (Avg Bid)
    $15 / hr Giá đặt trung bình
    6 lượt đặt giá

    Need an experienced architectural to draw a steel framed house to AUstralia ?? standard

    $244 (Avg Bid)
    $244 Giá đặt trung bình
    9 lượt đặt giá

    I need someone with architectural modelling skills to draw up a 2D floor plan for an indoor cricket centre. The freelancer should have excellent communication skills and be able to deliver high quality drawings which may form the base for more detailed plans and 3d models. My wish is to build the cricket facility using a steel portal frame building measuring 160ft (length) x 50ft (width) x 19.5...

    $165 (Avg Bid)
    $165 Giá đặt trung bình
    19 lượt đặt giá

    Looking for structure analysis for stainless steel column cladding

    $145 (Avg Bid)
    $145 Giá đặt trung bình
    22 lượt đặt giá

    Two tension tests were performed on 3 samples of different materials (Steel, Brass, and Aluminum). The data for each test will be supplied ([đăng nhập để xem URL]) Use Matlab for each task Task 1: In Matlab, use the tension data (2 tests X 3 materials = 6 data sets) to evaluate the stress, strain, modulus of elasticity, yield strength, ultimate strength, and breaking strength. Make 3 stress-stra...

    $111 (Avg Bid)
    $111 Giá đặt trung bình
    18 lượt đặt giá

    We have a .dwg file with the floor plan for the existing ground floor and the new mezzanine floor that we want to add, and the staircase down from the mezzanine floor. We want to add a small new mezzanine floor (about 50m2) as a steel construction, and need a detailed construction drawing and material specifications for ordering the steel beams and giving instructions to the workers who shall ins...

    $175 (Avg Bid)
    $175 Giá đặt trung bình
    47 lượt đặt giá

    Buenos días, Me pongo en contacto con ustedes para solicitar un presupuesto relativo a una estructura metálica. El proyecto incluiría el diseño, fabricación, transporte, instalación, estabilidad y planos con instalación. Adjunto las especificaciones técnicas de las que debe disponer la estructura. Sólo se requiere la estructura de sop...

    min $59272
    min $59272
    0 lượt đặt giá

    I'm looking for a product designer to help finalize and sketch a product with dimensions to be developed. The product is a portable oven that will be made out of stainless steel but has a unique cooking concept. I need some assistance and advice on finalizing the design so I would prefer someone with experience in industrial / applinces. I have sketched and designed the product myself but nee...

    $207 (Avg Bid)
    NDA
    $207 Giá đặt trung bình
    33 lượt đặt giá

    Hello everyone, I'm the employee looking for an engineering company, we are looking for experienced professionals skilled in the use of autoCAD and Bim programs. The sought-after figures must be able to develop structural projects with reinforced concrete and steel. The employment would be full time, with a duration to be agreed (at least one year), so if you are not interested in doing full ...

    $19 / hr (Avg Bid)
    $19 / hr Giá đặt trung bình
    32 lượt đặt giá

    Hi I have made a plan for garden and need to redesign the same (if required) with 3d rendering. files are attached for needful. 3 D rendering needs to be very clean and best of graphics. 1. Swimming pool ladders are missing so need to be installed. 2. steel pipe railings need to be provided for staircase going down towards club house. 3. Club house and Gym needs to be shown in basement 4. tennis ...

    $87 (Avg Bid)
    $87 Giá đặt trung bình
    9 lượt đặt giá

    Our business is in the excavator market building products for safety of operators. For a new product we are looking for a CAD designer who is willing to help us design and prepare a new enclosure. Our product is based on nextion 4,3" and has some extra buttons. PCB design is what we do in-house so only designing the enclosure is necessary. The current enclosure is made of 2 bended steel part...

    $19 / hr (Avg Bid)
    $19 / hr Giá đặt trung bình
    12 lượt đặt giá

    Hello. I need an academic/structural engineer who is professional in Abaqus to do this work for me. All the experimental works are done. The beams are subjected to an eccentric load at midspan and fixed at the end supports. Total models required=32. Details will be given later. Concrete, steel bars and stirrups, and FRP bars and stirrups are used as reinforcement. I repeat that the FEA work needs ...

    $442 (Avg Bid)
    $442 Giá đặt trung bình
    9 lượt đặt giá
    Trophy icon Logo Design InduServ 11 giờ left

    We are a small but steadily growing steel company offering many industrial services (hence the name). We are a group of smaller companies and want to have unified logos for every sub company. The InduServ Group contains the following branches: + InduServ STEEL + InduServ TECH + InduServ CONSTRUCTION + InduServ WELD + InduServ DIGITAL We currently have a logo (appended) and a basic web presence ([đ...

    $238 (Avg Bid)
    Bảo đảm
    $238
    1377 bài tham dự

    je veux quelqu'un qui peut me gérer des plans d'ensemble comme cette exemple (Hangar R+1) peu import les dimensions, avec l'exportation des plans en dwg ou dxf, Sur Autodesk ADVANCE STEEL. Plans d'ensemble (ELEVATIONS, IMPLANTATION, PLANCHER, TOITURE...) Voila la vidéo de l'exemple que j'ai gérer sur STRUCAD. de préférence garder le...

    $12 (Avg Bid)
    $12 Giá đặt trung bình
    3 lượt đặt giá

    Jeemon V G, am interested in your profile, I need a steel detailer individual or group for our project, successful candidate have ongoing job, should be familiar with us/canadian standards and tekla software

    $18 / hr (Avg Bid)
    $18 / hr Giá đặt trung bình
    38 lượt đặt giá

    Look up websites in the EU that provide steel laser cutting services and send them a pre formatted e-mail and write down their contact data in a pre formatted excel sheet. Next to that you will actively look for businesses who provide these services in multiple languages so working with google translate to be able to perform the searches will be important. Please insert "I am ready Nick"...

    $5 / hr (Avg Bid)
    $5 / hr Giá đặt trung bình
    13 lượt đặt giá

    DESIGN and 1:4 SCALE WORKING PROTOTYPE. theoretical musings of engineers must be married with actual working contraption. cellar entry door, placed horizontally in the floor. Moving part automatically lowers and turns to open. It really requires someone who is familiar with automation and movement more complex than a sliding door in a grocery store. I am mostly concerned about the restricted...

    $8750 (Avg Bid)
    $8750 Giá đặt trung bình
    4 lượt đặt giá
    Trophy icon Flatpack fire pit 2 ngày left

    I'm looking for a creative person that can design me a one of a kind flatpack fire pit. I want the main structure to be in 3 pieces, all triangular in shape that slot together with an optional grill piece. Each piece should be around 550mm x 600mm high. I will be making it out of 3mm steel so the slots will need to be 5mm. You must have engineering CAD skills. I need proof that it fits togeth...

    $109 (Avg Bid)
    $109
    4 bài tham dự
    Trophy icon Brochure Designers and writer Đã kết thúc left

    Need a flyer made. need to look at the pictures and make a flyer that helps sell the property. I give you the main points. need to be an excellent writer and designer. 10243 CANYON DR. Escondido CA 92026 Priced at: $795,000 + Download Photos + Branded: [đăng nhập để xem URL] + MLS: [đăng nhập để xem URL] Totally renovated in 2020 1,904 SF 4 Bedrooms & 2 Baths, plus a detached ...

    $50 (Avg Bid)
    Gấp Bảo đảm
    $50
    89 bài tham dự

    3D model this tabletop fireplace heat detector. the final solution should be made from two parts, one part being the universal leg, and the other part being the universal angled plate. the material will be 18 gauge mild steel. you'll need both holes to hold the parts together. all bolts to be 1/4" 20 x 1" long. stainless steel complete with matching nut. bolt holes to be a tight...

    $113 (Avg Bid)
    $113 Giá đặt trung bình
    7 lượt đặt giá
    Publish a Document Đã kết thúc left

    Publishing a Word document, We are a Steel Fabrication and Engineering Firm and in need of an outline/ case study of a Continuous Improvement Process. Pictures will need to be referenced and Documented. appx 4 written pages, 9 to 10 pages of pictures that will need formatting and design of layout. timeline is quick 24 hrs.

    $102 (Avg Bid)
    $102 Giá đặt trung bình
    9 lượt đặt giá
    STEEL PART Đã kết thúc left

    WE ARE A REPAIR SHOP AND NEED A 2D CAD DRAWING FOR OUR PLASMA TABLE. IVE ATTACHED A PICTURE WITH ALL THE DIMENSIONS

    $78 (Avg Bid)
    $78 Giá đặt trung bình
    28 lượt đặt giá

    I would like to see some kitchen design options modified on these pics. We like the HGTV style and are just looking for options on this,

    $159 (Avg Bid)
    $159 Giá đặt trung bình
    54 lượt đặt giá
    pipe flanges shop drawings -- 2 Đã kết thúc left

    Hi The project is to enable line inspections at a Dry Dock facility where there is a ballast line that presently has a custom, black iron flange which we want to replace with a custom steel flange which is welded on a standard 30 inch section of pipe, a slip on flange and a blind flange. The SP and BF are attached together with two steel plates and a hinge to form a removable opening. I want...

    $123 (Avg Bid)
    $123 Giá đặt trung bình
    41 lượt đặt giá

    Attached are some hand drawing of the design. It is a medical stander. The stander should 3D modeled using SolidWorks. Engineering drawings using SolidWorks are also needed. Needs to be done ASAP. I've also attached photos of some main components that need be done in the drawings. Below are some constraints for the design if needed: Max weight of patient: 1800 N Max height of adult patient: ...

    $230 (Avg Bid)
    $230 Giá đặt trung bình
    31 lượt đặt giá
    Smart fitness Đã kết thúc left

    Hello, my name is Nir. I'm an entrepreneur in the process of a new fitness product design. My company creates outdoor sports products. We are planning to create a model of the next generation of our product, and looking for someone who specializes with solidworks program, including calculations of volumes, weights, and stress abilities(by doing stress test simulation) of different matters. Fo...

    $450 (Avg Bid)
    $450 Giá đặt trung bình
    31 lượt đặt giá

    I need someone skilled in CAD to detail up a small steel truss footbridge across a creek. Structural design (hand sketches + example .dwg) and survey (.dwg) will be supplied. Expect to produce 1 site plan, 1 long and transverse section, 1 detail sheet with approaches, steel connections, abutments, handrail detailing. Drawing output to be as .dwg so that owner can add/change notes. Please review e...

    $132 (Avg Bid)
    $132 Giá đặt trung bình
    22 lượt đặt giá

    Hello Genius, This is Eng. Ibrahim! I have a new factory in KSA working in Safety equipment's + Stainless Steel Products (combine of products), I want someone who can create logo for my company . we manufacturer fire door rated, wood and aluminum doors , stainless doors and we sell as well fire Extinguisher, safety shoes and other personal safety equipment's. I need someone who is creat...

    $72 (Avg Bid)
    $72 Giá đặt trung bình
    40 lượt đặt giá

    I need to design an inverter panel box made up of by sheet steel materials. So I need an aesthetic look panel with LCD screen and proper ventilation layout. Those are having expertise in autocad or solid state or any other software based 3D design experience needs to apply for the same.

    $16 (Avg Bid)
    $16 Giá đặt trung bình
    18 lượt đặt giá
    Welders and workers needed Đã kết thúc left

    We are working on a steel construction project and are in need of 2 welders and also workers taht know how to work with tere hands for different parts of the project. we need at least 2 welders and 2 to 4 extra workers. Are you good in working with your hands and can you even work with small machinery like cutting, abraising or other works in steel then please let me know. The project runs for the...

    $2 - $7 / hr
    Địa phương
    $2 - $7 / hr
    0 lượt đặt giá