Thingiversecông việc

Bộ lọc

Tìm kiếm gần đây của tôi
Lọc theo:
Ngân sách
đến
đến
đến
Loại
Nhiều kỹ năng
Ngôn ngữ
    Tình trạng công việc
    51 thingiverse công việc được tìm thấy, giá theo USD
    3D models of night lights Đã kết thúc left

    I need help in creating 10 3D models of plug-in night lights in various shapes that will be provided. Some shapes may include a seashell, a cactus or/and animal head bust. While I do not necessarily expect that these models will be created from scratch, I expect the models to be based off the models with commercial licenses only (if copied from such websites as Thingiverse or Scratchfab). I’ll most likely select someone with a relevant portfolio.

    $136 (Avg Bid)
    $136 Giá đặt trung bình
    81 lượt đặt giá
    STL file creation Đã kết thúc left

    ...project should be completed within 1-2 weeks. A detailed design may not be required, but the end result should be a high quality 3D model that can be used for printing or other purposes. If you have experience in STL file creation and 3D modeling and can deliver a top quality product in this time frame, I would love to work with you. For hopeful ease, I have added an example of what someone on thingiverse created and I would like the design I am contracting for to be similar, but without infringing on their ownership rights to that design....

    $75 (Avg Bid)
    $75 Giá đặt trung bình
    35 lượt đặt giá

    I am looking for a freelancer who can help me modify existing STL files for a project. I have detailed plans for the modifications that need to be made. The STL files are not intended for 3D printing. Ideal Skills and Experience: - Proficient in STL file editing and modification - Familiarity with CAD software - Strong attention to detail to accurately implement the modifications - Ability to follow specific instructions and plans for the modifications

    $93 (Avg Bid)
    $93 Giá đặt trung bình
    56 lượt đặt giá

    I am looking for a freelancer who can help me modify existing STL files for a project. I have detailed plans for the modifications that need to be made. The STL files are not intended for 3D printing. Ideal Skills and Experience: - Proficient in STL file editing and modification - Familiarity with CAD software - Strong attention to detail to accurately implement the modifications - Ability to follow specific instructions and plans for the modifications

    $36 (Avg Bid)
    $36 Giá đặt trung bình
    25 lượt đặt giá

    I have a Thingiverse mounting case for an Invoxia GPS tracker (PNG attached below). I need the mounting face of the case to be thickened to accommodate two recessed mounting screws such that the screw heads won't obstruct the central cavity of the mounting case. Recessed mounting screw holes need to be added to the the mounting face, and two aligned access holes on the non-mounting face of the case need to be added to allow allen wrench access to the mounting screws. I can sketch these modifications on screenshots of the STL file along with dimensions for the hole locations, recess depth, and diameter. If you can also make several prints of the file, or is well-connected to an appropriate printing service, then we can bundle that also.

    $81 (Avg Bid)
    $81 Giá đặt trung bình
    43 lượt đặt giá

    We are interested in building a site that has the ability to have uploadable and downloadable projects. Users would create protocols or text fields then be able to upload pictures and files. It would be great to have the ability to change the UI over time as we gain more user feedback. Thingiverse and are both great example of what we are trying to achieve.

    $1157 (Avg Bid)
    $1157 Giá đặt trung bình
    98 lượt đặt giá

    I have a .igs design of a 10/22 rifle stock it's a model of the original factory stock i need the model split into 3 pieces for 3d printing in addition to splitting into 3 pieces each 3 pieces need to be slotted so that when 3d printed they can be fitted together and glued properly should be a fairly...printing in addition to splitting into 3 pieces each 3 pieces need to be slotted so that when 3d printed they can be fitted together and glued properly should be a fairly quick and easy job for some one proficient in fusion 360 slotting example :2893553 is a example of a aftermarket stock how i want this model split and slotted will be similar to the above thingiverse model I will need the updated .igs file as well please provide exported .stl files as well

    $19 (Avg Bid)
    $19 Giá đặt trung bình
    19 lượt đặt giá
    robot designer Đã kết thúc left

    :4908016 blend file is in thingiverse would like a humanoid robot crafted with torso motors using these planetary gears. i also have a wormgear box on my shot pouring machine that works well :3047007

    $37 (Avg Bid)
    $37 Giá đặt trung bình
    3 lượt đặt giá
    fusion 360 tutor -- 3 Đã kết thúc left

    Hi, I just passed a written exam f...choice. I plan to choose a rc plane/drone combination as my project. I should provide design/simulation/manufacture data. I am allowed to access internet during exam and download stl/amf files. My issues for now is to practice the mandatory design within the time frame. I am very slow, so I am looking for ways to speed up. And for the other one, I will need to start from a scratch; Downloading thingiverse files and convert them to editable files. Which should give me a choice to do with my project items for the final category. For now, my preference is something rc plane/car combination. My budget: USD 150 Duration : 2 months Platform: Github, Fusion 360/Team (mine is Education License) I will provide the ongoing test prep examples and my wo...

    $98 (Avg Bid)
    $98 Giá đặt trung bình
    5 lượt đặt giá
    Trophy icon re-design fusion 360 electronics case Đã kết thúc left

    can you apply this concept :33296 to my project? This will be 3D printed so please design for 3D printing. update 5.3.21 - in case Thingiverse link does not work, I've added the thingiverse "concept" files to the project files beiow. thanks! Given: fusion 360 files of my project AND the thingiverse file in description Please provide file formats .STL, .F3D or .AMF or .3MF

    $120 (Avg Bid)
    Bảo đảm
    $120
    11 bài tham dự
    fusion 360 tutor -- 2 Đã kết thúc left

    Hi, I just passed a written exam for 3D printer engineers and hope to pass the next exam on Fusi...choice. I plan to choose a rc plane/drone combination as my project. I should provide design/simulation/manufacture data. I am allowed to access internet during exam and download stl/amf files. My issues for now is to practice the mandatory design within the time frame. I am very slow, so I am looking for ways to speed up. And for the other one, I will need to start from a scratch; Downloading thingiverse files and convert them to editable files. Which should give me a choice to do with my project items for the final category. My budget: USD 150 Duration : 2 months Platform: Github, Fusion 360/Team (mine is Education License) I will provide the ongoing test prep examples and my wo...

    $82 (Avg Bid)
    $82 Giá đặt trung bình
    5 lượt đặt giá
    fusion 360 tutor Đã kết thúc left

    Hi, I just passed a written exam for 3D printer engineers and hope to pass the next exam on Fusion 360 in two months. I hope someone to help me with this. It has ...choice. I plan to choose a rc plane/drone combination as my project. I should provide design/simulation/manufacture data. I am allowed to access internet during exam and download stl/amf files. My issues for now is to practice the mandatory design within the time frame. I am very slow, so I am looking for ways to speed up. And for the other one, I will need to start from a scratch; Downloading thingiverse files and convert them to editable files. Which should give me a choice to do with my project items for the final category. My budget: USD 150 Duration : 2 months Platform: Github, Fusion 360/Team (mine is Education...

    $150 (Avg Bid)
    $150 Giá đặt trung bình
    5 lượt đặt giá

    Bid from Moscow please. At the attachment two different projects from thingiverse. I don't know which one has more stronger wall installition stand. I need one of that. Inside will be 13mm x 10mm temp sensor. I prefer ABS+ metarial.

    $37 (Avg Bid)
    $37 Giá đặt trung bình
    4 lượt đặt giá
    Thingiverse C# Client Đã kết thúc left

    I require a desktop application written in C# that will list "things" from the Thingiverse website using their RESTful API. I don't require a full-blown app. A lot of customization will be done afterwards by myself. What I do require is the following: * Form with a button and listbox * When the button is clicked, the user should be prompted for username and password * This info should be used to authenticate with Thingiverse * Once authenticated, the first page of the newest items should be retrieved (Name, Author, Date), and displayed in a listbox Additional info on the Thingiverse API can be found here:

    $53 (Avg Bid)
    $53 Giá đặt trung bình
    8 lượt đặt giá

    I'd like to have designed an ear saver. This should be very quick for an experienced 3d modeller, please be able to complete immediately. This will fit on the back of the head, to allow the loops of a mask to connect to this. There are many examples of these on thingiverse or other 3d printing sites. The item designed here will be 3d printed so please use relevant design principles. I will also want some text on the side (to be decided). I can send some example pictures. The arc will have hooks on the outside that loops would connect to. All 3d design ownership will transfer to me upon payment of the project. Please quote "earsaver" in your submission to show me you have read my details completely.

    $13 (Avg Bid)
    $13 Giá đặt trung bình
    3 lượt đặt giá

    I have a 3D .stl file the size of an egg roughly 54.67 x 60.76 x 53.10 (mm) in dimensions. It needs to be printed in high quality resin so there is little lines or clean-up. I am based in Australia so would prefer someone here. Looking for a professional. I do not want to see my files on Thingiverse/CGTrader next week. If successful would like an ongoing relationship for printing jobs in future. Have included example of size of printed sample from cheap printer.

    $93 (Avg Bid)
    $93 Giá đặt trung bình
    11 lượt đặt giá

    There is a set of STL files on Thingiverse for a chess set that I would like to have redesigned a bit. Things on the todo list would be as follows: 1. Clean up a bit more and optimize to 3D Print without the need of supports. So far these all print pretty well without supports except for under the chin. 2. Smooth out the designs since you can still see the polygons when printed. I am hoping this can be smoothed out much, much more. 3. Adjust the heights of the chess pieces to more accurately resemble a proper chess set. The King should be tallest, then the Queen, then Bishop, then Knight and Rook (same size to each other), then the Pawn is the smallest. a. The King is good as far as height. Maybe add a walking cane and maybe a cape so he looks like a Pimp. b. The Queen will b...

    $123 (Avg Bid)
    $123 Giá đặt trung bình
    7 lượt đặt giá

    Project Description (also see attached text file for links): I am looking to create a prototype for a smart home display based on the raspberry pi 7 inch touch screen. Official link to touch screen: A reference object for dimensions can be found on thingiverse here: :1646255 I am looking for a 3d model to be created that looks somewhat similar to this example object on thingiverse: :2756684 That case is designed to fit one raspberry pi unit nicely in a contained unit. The smart home prototype unit we're building will need to fit a raspberry pi with a hat on it, along with an arduino and other sensors that won't nicely fit in place in a unit. This model will need to have

    $138 (Avg Bid)
    $138 Giá đặt trung bình
    36 lượt đặt giá

    i have a website for my 3d prints my work is download the project from my mini factory and thingiverse and upload files on my drive and pics on my website with a very short copy ane paste two lines that it i give 1 ru per product

    $11 (Avg Bid)
    $11 Giá đặt trung bình
    8 lượt đặt giá

    I need a 3D model made in Fusion 360. I originally designed a project using a downloaded STL file from Thingiverse. I can provide a link to the original. Unfortunately I don’t have time to re-model this grip myself.

    $109 (Avg Bid)
    $109 Giá đặt trung bình
    10 lượt đặt giá
    Enlarge a 3D printing File Đã kết thúc left

    Simple work: I need to enlarge a 3D printing file from Thingiverse to fit some other parts here is the size requirements for enlarging will be provided Simple edits :2306356

    $23 (Avg Bid)
    $23 Giá đặt trung bình
    28 lượt đặt giá

    Build a competing website for treatstock and 3d hubs built on wordpress. Build a website like for P2P 3d printing people can sign up and list there 3d printing service with an automated quotation system for STL files with the option to import from other websites such as thingiverse of my mini factory. Good seo.

    $366 (Avg Bid)
    $366 Giá đặt trung bình
    20 lượt đặt giá

    ...that will mount to a model I have drawn of the boat Creating tubes within the housing to flow the water from the base of the housing, through the cyclone filter to the impellers. Create tubes to flow the water back out again. I will provide a sketch design for the housing and specifications for the tube diameter etc. In addition to the above I would like to integrate some of these things from thingiverse. Clamp to attach/detatch the housing from the craft :2477698 Cable Clips :2596197 Cyclone Filter on intake :2829268 Hinge to allow the model to fold if it looks like it could :61978 Gimbal or camera mount point :2826759 And possible

    $9 / hr (Avg Bid)
    $9 / hr Giá đặt trung bình
    10 lượt đặt giá

    The project will be very similar to an existing "thing" on thingiverse (:661004). The differences are that the tablet model will be different, the tablet will not be in a portrait position but in landscape position. The model of scanner is also different. And lastly, the tablet will not be parallel to the scanner but inclined at 45 degrees.

    $153 (Avg Bid)
    $153 Giá đặt trung bình
    19 lượt đặt giá

    I have an stl file from thingiverse that I need converted to CAD. I also need to remove the logo on the side completely. Also, I need the camera port on the underside of the device to be wide enough to hold a camera that is 5.5mm in width. Here is the file: :2515572

    $24 (Avg Bid)
    $24 Giá đặt trung bình
    36 lượt đặt giá

    I have an stl file from thingiverse that I need converted to CAD. I also need to remove the logo on the side completely. Also, I need the camera port on the underside of the device to be wide enough to hold a camera that is 5.5mm in width. Here is the file: :2515572

    $23 (Avg Bid)
    $23 Giá đặt trung bình
    5 lượt đặt giá

    I need someone to make modifications to a 3D item I found on Thingiverse and then deliver a ready to print file that I can have printed on a 3D printer. The item is here: :647472 I need this item to be: - widened by 12 inches on each side; - the bottom opening made more narrow (to 1/2 cm) to increase suction; - i also need the connection to be made to the standard diameter (1 1/2"); - and some other small modifications. Thank you

    $234 (Avg Bid)
    $234 Giá đặt trung bình
    49 lượt đặt giá
    3d modelling Đã kết thúc left

    We are a 3D printing service based in Gilbert, Arizona. This is our first time working on Freelancer.com and as a result, we are posting this job as a trial run to see if we like the process. With this is mind, we are looking for reliable 3D low poly modeling freelancers with 3d printing experience. For this specific project we desire a low-poly sitting lion similar to this model on thingiverse: :1249096 . To reiterate, we want a 3d printable low poly lion without the need to print with support material. We are indifferent to which 3d modeling software is utilized, rather, that we receive the raw design file that can be converted to an STL and intellectual property rights.

    $93 (Avg Bid)
    $93 Giá đặt trung bình
    48 lượt đặt giá
    New website with 3D models Đã kết thúc left

    I need a new website. I need you to design and build it. The design must be clean and easy to navigate The site is very much like Thingiverse or myminifactory Instructables We're people can register and submit models and projects Simple models people can download free Some models will be charged There will also be shop And an option to add sponsors to download pages add movies etc Add parts that can be purchased for the project Sign up process Submit process Stats on likes comments downloads

    $2240 (Avg Bid)
    $2240 Giá đặt trung bình
    38 lượt đặt giá

    Your assignment is to create a: considering Rourke and Allahyari’s 3D Additivist Cookbook examples, Using Meshmixer, Photoshop and Project Felix. We will create a Useless Toy, no more than 4 cm cubic, 3D print it, create a spread, and capsule toy box. Look at one of the supplied sections of the 3DAdditivist Cookbook. Consider its content. Roam Thingiverse for an hour of the class period. Download ten objects. Load selected objects into a directory and experiment with welding them. Do not worry if the program crashed if you have a big mesh. Save your mesh, submit for review.

    $383 (Avg Bid)
    $383 Giá đặt trung bình
    9 lượt đặt giá

    Topic: A Full 3D printing cycle Briefly describe "What is a STL file?" (source: thingiverse, 123Dcatch, turboSquid); "What is a 3D slicer?" (Cura, slicer, simply3D)

    $14 (Avg Bid)
    $14 Giá đặt trung bình
    1 lượt đặt giá

    (To be done either in javascript or using jQuery) - A form has a textfield: search_or_url e.g. <fo... [string] :[int] [string] [string] [user]/[string] (NB: should cope with or ) If it does alert('/save/domain/[url]/[parts]') e.g. /save/sourceforge/projects/sawat /save/thingiverse/thing:191991 /save/pinshape/items/adadadaad-asdam9a99da /save/instructables/id/sasdaadada /save/github/user-id/strasdaiiasdia If it doesn't match these alert('cant add site yet') If it isnt a url, alert('searching for '[entered text]').

    $16 (Avg Bid)
    $16 Giá đặt trung bình
    2 lượt đặt giá
    Edit Thingiverse file Đã kết thúc left

    I need a fork of this logo made: :1128630 Modifications I want: - Bottom half of the figure should be expanded in order to make the figure appear the same from every corner. (Presently the bottom half looks much narrower than the top half when viewed from the side.) - Bottom figure should be pointed, just like the top figure. A rod should extrude from this point (see point below), however, so I recognize it can't be a perfect point. - Add a square platform for the 3D figure so the whole thing can sit on a desk or table, like a trophy. - The base should have the word "Ethereum" in relief on each side. I intend to use this as a table marker for the Ethereum meetup I run here in Portland.

    $50 (Avg Bid)
    $50 Giá đặt trung bình
    1 lượt đặt giá
    Build a Website Đã kết thúc left

    Looking to have a website developed that has identical functionality of and a smooth look and feel similar to the aforementioned website. Please familiarize yourself with the thingiverse and it's functionality prior to bidding.

    $1930 (Avg Bid)
    $1930 Giá đặt trung bình
    80 lượt đặt giá

    I need to have a FreeCAD design of a sheet metal case. you may use: Please see :1418763 The rendering should be for pcb, with the dimensions shown in mm. The material will be aluminum sheet, bent to accommodate the same board shown in thingiverse.

    $47 (Avg Bid)
    $47 Giá đặt trung bình
    31 lượt đặt giá

    Hello. Good afternoon. This work is to develop the concept of a metal 3D printer (msls). The work is to carry out the design of a 3D printer for metal parts of 1 x 1 x 1 meters of printing volume. I need two renderings of machine ope , two renderings of the machine closed and 1 rendering the machine next to some printed pieces (I will choose the pieces in grabcad or Thingiverse site). Some metal 3D printers can be found on google for reference, but we MUST create something new The inside can be very similar to what we already have on the market today, however, its very important that the outside part has a new design, designed uniquely for our high-volume 3D printer. You do not need to think about the question of functionality or engeneering, we only need the concept of mac...

    $241 (Avg Bid)
    Gấp
    $241 Giá đặt trung bình
    38 lượt đặt giá
    Quote on Wordpress plugin fix Đã kết thúc left

    This plugin doesn't seem to work with the latest version of Wordpress. I'd like to get a quote on fixing it to work. This is just for the quote. We'll do the project separately.

    PHP
    $33 (Avg Bid)
    $33 Giá đặt trung bình
    9 lượt đặt giá
    Build a Website -- 2 Đã kết thúc left

    I need to build a thingiverse, like platform on our website biobots.io. It should be able to file share any type of file and we have a amazong web host server. It needs to be written in python.

    $557 (Avg Bid)
    $557 Giá đặt trung bình
    22 lượt đặt giá
    Build a Website Đã kết thúc left

    I need to build a thingiverse, like platform on our website biobots.io. It should be able to file share any type of file and we have a amazong web host server.

    $649 (Avg Bid)
    $649 Giá đặt trung bình
    59 lượt đặt giá
    Write an Android application Đã kết thúc left

    I need JAVA Android app with access to the API. The app should provide for everyone to browse lastest things photos without singn in to , just like thingiverse app, but i need just photos without more details about the thing. The app should be simple - when app is open i need be able to scroll down latest things not clickable photos. To access API: REST API Reference:

    $28 (Avg Bid)
    $28 Giá đặt trung bình
    9 lượt đặt giá

    webgl (web based application) that is a combination of and thingiverse customizer. In short the application should allow for a user to upload a picture and convert to 3d while adding other basic functions like text and simple shapes.

    $229 (Avg Bid)
    $229 Giá đặt trung bình
    5 lượt đặt giá
    Park Design Đã kết thúc left

    I am working on an attraction for a city. I have been trying to do it in FormZ, which I have a copy of, so it is preferred, but not required....following components need to be added or improved upon: a biodome A large animatronic animal A skyway (like a chairlift but horizontal to the ground and a continuous track) Some playgrounds A hotel A lighthouse A solar covered parking lot An amphitheater and the ground for the entire attraction needs to be landscaped and not flat I don't mind downloading free files from places like thingiverse to scale and add to the project. But everything must be to scale. I have attached a PDF of what I have now. It looks terrible. Upon getting the project, I will upload my current presentation on the whole park to put some more de...

    $601 (Avg Bid)
    Gấp NDA
    $601 Giá đặt trung bình
    13 lượt đặt giá

    I am looking to hire a Javascript Developer to create a website application for 3D modeling. The web app needs to provide a framework for users to login, create and save parametric models that are transformed in real time using editable parameters in the UI. I only need a programmer to create the basic framework so that I can focus on site des...should be simple and scaleable. This will NOT be a full-blown 3D model editor like Tinkercad or 3DTin. The app will simply render a single model assembly and allow registered users to customize the assembly and save it to their profile. You can view these websites for reference: My Robot Nation () Shapewright () Thingiverse () Shapeways ()

    $1134 (Avg Bid)
    $1134 Giá đặt trung bình
    1 lượt đặt giá

    I would like to get...service. There is a bit of leeway in the dimensions, and those are noted on the drawing, just in case I goofed in figuring the way things will fit when translated to 3d. The design is basically like a plumbing Y. It requires 2 male threaded ends and one female threaded end. It's about 5 in long overall, the diameter is about 1 in O.D. and the wall thickness should be about 0.075 in. I searched thingiverse and a few other places and found some models for 2-liter bottle threads, so I think that part does not need to be modeled from scratch. I have attached a drawing I made. I attached 2 versions of the file. I made the drawing in Turbocad, so the TCW version is the actual drawing, but I think the Autocad DWG file is probably just as good since it's a ...

    $15 / hr (Avg Bid)
    $15 / hr Giá đặt trung bình
    1 lượt đặt giá
    Build a Website Application Đã kết thúc left

    I am looking to hire a Javascript Developer to create a website application for 3D modeling. The web app needs to provide a framework for users to login, create and save parametric models that are transformed in real time using editable parameters in the UI. I only need a programmer to create the basic framework so that I can focus on site des...should be simple and scaleable. This will NOT be a full-blown 3D model editor like Tinkercad or 3DTin. The app will simply render a single model assembly and allow registered users to customize the assembly and save it to their profile. You can view these websites for reference: My Robot Nation () Shapewright () Thingiverse () Shapeways ()

    $1620 (Avg Bid)
    $1620 Giá đặt trung bình
    11 lượt đặt giá

    I need a 3D Model that I can print with a MakerBot Replica 2. I am wanting a "Star Crystal" from the book Huggly's Christmas (). Use the Amazon link and "Look Inside" the book for pictures of it. It is just a triangular base with a star shape that I would print in translucent plastic and put (2) CR2032 batteries with (4...in translucent plastic and put (2) CR2032 batteries with (4) 3mm LEDs. It would probably be about 9inches x 6inches in size. It would need to be mostly hollow with slots for the batteries and LEDs. Here is another 3D model that uses these batteries and LEDs: :89639 At the end of the project the model would be under creative commons and freely available on Thingiverse.

    $89 (Avg Bid)
    $89 Giá đặt trung bình
    16 lượt đặt giá

    Print a sculpture that I select from thingiverse. Approximate size will be 36"x36"

    $30 - $250
    $30 - $250
    0 lượt đặt giá

    We are looking for someone who can make us very attractive male and female action hero's bearing typical resemblance to prior art, but in original form. You will hav...must understand, read, and be capable of fully releasing the rights for your final models to us so that we can distribute, sell, or reprint them. In order to ensure that you read and understood this section, we kindly ask you to include the words "black tea" as the first part of your application Example: As an example, you make read the google groups post on a famous case with Akiko on Thingiverse, where the right were granted to the artist, but were not intended for distribution as a 3D model ever. So if you use Daz3D victoria, and similar system, you must be able to release full rights of the...

    $12 / hr (Avg Bid)
    $12 / hr Giá đặt trung bình
    29 lượt đặt giá