Usb keylogger projectcông việc

Bộ lọc

Tìm kiếm gần đây của tôi
Lọc theo:
Ngân sách
đến
đến
đến
Loại
Nhiều kỹ năng
Ngôn ngữ
    Tình trạng công việc
    4,027 usb keylogger project công việc được tìm thấy, giá USD

    PCIE USB 3.1 and 10 GB Ethernet card with trigger, Galvanic Isolation and drivers. 3D cad drawing a electrical simulations as part of delivery.

    $706 (Avg Bid)
    $706 Giá đặt trung bình
    12 lượt đặt giá

    I will supply an APK that was wrote to work on a native android device with NFC reader and i need to be adapt to an Android device that have a USB NFC reader. i will provide the reader drivers from the USB NFC reader.

    $293 (Avg Bid)
    $293 Giá đặt trung bình
    5 lượt đặt giá

    A freelancer is need to write a USB mass media interface for legacy MS-DOS. This should be coded in C++ using the OpenWatcom compiler. The program will need to be written as a 32-bit protected mode executable. Along with the program, a test program should be provided. The test program should also be compiled as a 32-bit protected mode program. The

    $336 (Avg Bid)
    $336 Giá đặt trung bình
    6 lượt đặt giá

    Looking for a Linux sysadmin who have experience with serial port settings, serial communication. I want to use Neoway M590E GSM/GPRS modem with USB-UART serial converter, looks like everything okay, but I can't communicate with the modem over terminal. I already tested the communication with the modem under Windows, everything fine, working. You need

    $18 (Avg Bid)
    $18 Giá đặt trung bình
    6 lượt đặt giá

    ...allow to connect serial devices to systems using a USB interface. Connecting the converter to a PC, you get one extra high-speed RS-232/422/485 ports. It must have the auto-tune baud rate and data format to the RS-485 network (totally compatible with Modbus). The power converter derives from the USB port and doesn’t need any power adapter. It also

    $27 (Avg Bid)
    $27 Giá đặt trung bình
    2 lượt đặt giá

    Who can help me to build any tool which enables a remote connected remote usb PC to act as if, is connected to my own computer. I want to be sharing my usb software remotely.

    $30 (Avg Bid)
    $30 Giá đặt trung bình
    2 lượt đặt giá
    Remote usb server 1 ngày left

    I needed a tool or software which will enable me to remotely share my usb with other remote computer(s). Example, for unlocking purposes

    $30 (Avg Bid)
    $30 Giá đặt trung bình
    3 lượt đặt giá

    ...allow to connect serial devices to systems using a USB interface. Connecting the converter to a PC, you get one extra high-speed RS-232/422/485 ports. It must have the auto-tune baud rate and data format to the RS-485 network (totally compatible with Modbus). The power converter derives from the USB port and doesn’t need any power adapter. It also

    $52 (Avg Bid)
    $52 Giá đặt trung bình
    3 lượt đặt giá

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker

    $44 (Avg Bid)
    $44 Giá đặt trung bình
    6 lượt đặt giá

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker

    $80 (Avg Bid)
    $80 Giá đặt trung bình
    8 lượt đặt giá
    Mouse/Keylogger Đã kết thúc left

    Looking for the code for a macro/keylogger that will record both keystrokes and mouse clicks. Must be compatible with Android/WIN/MAC and preferably Linux but not necessarily. The code is to run on an Android device but records the macros from WIN/MAC/(Linux). It is permitted to have the requirement for a separate code to be installed upon the WIN/MAC/Linux

    $304 (Avg Bid)
    $304 Giá đặt trung bình
    8 lượt đặt giá

    There is a led on the cypres fx3 chip board. This function is to turn on the LED by pressing the button on the winform. uvc communication (1.1) version Using the extension unit command guidExtensionCode: {63610682-5070-49AB-B8CC-B3855E8D221D} By sending the extension unit command 0x0D through the above GUID, the LED control Since the maximum value is set to 9, the minimum value is set to 0, ...

    $10 - $30
    $10 - $30
    0 lượt đặt giá

    This interface will be based on the Cypress EZ-USB chip and will be driven by a C/C++ program running on the PC. The C/C++ program will be written in modular format, with functions for each individual elementary/basic control of the devices that we want to control or monitor. Since this project will be part of a course for student training, all software

    $174 (Avg Bid)
    $174 Giá đặt trung bình
    3 lượt đặt giá

    ...stop challenging - Can be manage the project and do the scratch development - iOS developer who has knowledge of UVC(USB video class) and OpenCV ref- [đăng nhập để xem URL] Anything unique about the project or team - The Github and the Jira will be use on this project. Definition of done We can build an app

    $1278 (Avg Bid)
    $1278 Giá đặt trung bình
    39 lượt đặt giá

    Good evening, I'm trying to make a project but I haven't purchased a board yet because I'm not sure which board to buy. So far, I've looked at the Zybo-Z7 or Arty-Z7. You will need to have these boards already obviously to complete this project. They both have sample projects for HDMI in and HDMI out. What I'm trying to accomplish is have: 1) PC

    $361 (Avg Bid)
    $361 Giá đặt trung bình
    7 lượt đặt giá

    HELLO, I NEED TO ADD PRINT FEATURE via usb and bluetooth to an existing app with option on/off autoprint, number of copies i have code you can use it to generate the apk using phonegap

    $240 (Avg Bid)
    $240 Giá đặt trung bình
    12 lượt đặt giá

    1. way to check if there is any USB TOKEN / SMARTCARD with certification. 2. querythe device for some "string" in the description 3. send "PIN" to the device. 4. get certificate to sign document. all writen in DELPHI, can use OpenSSL or PKCS#11 pr PCSC dll or what evere needed. all must be free from any Copyright to any therd side

    $631 (Avg Bid)
    $631 Giá đặt trung bình
    3 lượt đặt giá

    I am looking a source code of MT7601U Wireless USB wifi adapter Windows Driver. If you can develop it or have it, please bid for me. Thanks.

    $4119 (Avg Bid)
    $4119 Giá đặt trung bình
    6 lượt đặt giá

    In order to use Dosbox Emulator on Android devices, we must be able setting the usb port to serial port function, thus, our DOS application will have communication with external serial devices.

    $577 (Avg Bid)
    $577 Giá đặt trung bình
    8 lượt đặt giá
    USB Chargers ID design Đã kết thúc left

    We are looking for USB chargers ID design,including USB Home chargers,USB Car chargers,Multi-USB charging stations with unique and compact design

    $170 (Avg Bid)
    $170 Giá đặt trung bình
    10 lượt đặt giá

    preciso de um desenvolvedor em ccs compiler para utilizar a biblioteca 16FUSB para criar um teclado USB HID com o pic 16F628A

    $144 (Avg Bid)
    $144 Giá đặt trung bình
    1 lượt đặt giá

    ...(with simple switch or similiar). The device must be connected with a computer with USB. On the computer, I have a software where I can define, at which number of device the LED should switch on. 100-200 of that device will be conncted to one computer, so I'm not sure, if USB is the best way to connect. Maybe a differnt way is much better, or a optical connection

    $1634 (Avg Bid)
    $1634 Giá đặt trung bình
    41 lượt đặt giá

    I am looking for some .Net code that will allow me to reliably send text commands directly to a USB port (not through windows print spooler).

    $401 (Avg Bid)
    $401 Giá đặt trung bình
    7 lượt đặt giá

    Hi. I want to build a smaller version of the fly/mosquito racket/swat and I want to have a charging by USB capability

    $225 (Avg Bid)
    $225 Giá đặt trung bình
    9 lượt đặt giá

    I need you to develop some software for me. I would like this software to be developed using C or C++. Use pic18lf45k50 to be a mass storage usb device with ability to write/append to file using SD card

    $46 (Avg Bid)
    $46 Giá đặt trung bình
    6 lượt đặt giá

    I need you to develop some software for me. I would like this software to be developed using C or C++. To make a pic18lf45k50 appear as a mass storage device with and sd card using mplabx and xc8. with ability to write/append to a file

    $227 (Avg Bid)
    $227 Giá đặt trung bình
    10 lượt đặt giá

    I have my program already now its used usb dongle to control license .And now I would like the license tool able to generate license which able to define number of users , expiredate or unlimited date , and lock my program to use only one computer was defined ( by cpu id )

    $1053 (Avg Bid)
    $1053 Giá đặt trung bình
    8 lượt đặt giá

    I have an USB hard drive which contains an encrypted Linux LUKS partition whose password I have forgotten. However, I have a list of possible passwords as a text file. One password candidate per line. There are about 100 password candidates in this file. I need you to write a script I can run in Linux that will try to open the USB hard drive, which

    $25 (Avg Bid)
    $25 Giá đặt trung bình
    1 lượt đặt giá

    ...monitor from from a PC via its USB port. This device will have an I/O port (one for for 8-bit input and one for 8-bit output ). Also, apart from the I/O, I will need a few additional lines to work as CONTROL lines. The interface circuitry could be built using an ARM Cortex micro-controller, or use an available standard USB interface chips. In either case

    $191 (Avg Bid)
    $191 Giá đặt trung bình
    32 lượt đặt giá

    Hello, we have designed a new QR code scanner device. For security reasons we couldn't use a normal USB socket so we redesigned it. So to install the software we need a adapter "USB to our specially designed socket". It has to be a design for manufacturing, so we can 3D print it and use it immediately. I'll send you a file after signing an NDA, how

    $2274 (Avg Bid)
    $2274 Giá đặt trung bình
    46 lượt đặt giá

    Need single USB 3amp ultra fast smartphone charger design with following technical specifications and features: Technical specifications and features: • output voltage: 3.6V to 12V and the maximum output current: 3A or slightly greater than that like 3.1 or 3.4 amp and this power should be 18W (Not cheaper and conventional design like output 5V/3A

    $2516 (Avg Bid)
    $2516 Giá đặt trung bình
    8 lượt đặt giá

    I have a program installed on my desktop and for some reason its not able to detect the usd reader. need someone that can take a look at it remotely

    $66 (Avg Bid)
    $66 Giá đặt trung bình
    1 lượt đặt giá

    I'm struggling to solve issues with my Windows10 system that uses two USB (DisplayLink) monitors. Two problems need solving: 1 - Random artefacts: at times the monitor(s) are not properly rendered (refreshed); 2 - Displays swapping: at times after reboot the two monitors are swapped;

    $200 (Avg Bid)
    Nồi Bật Được đảm bảo Cuộc thi hàng đầu
    $200
    9 bài tham dự

    ...detailed description of circuit operation Specifications: - usb-c in - 3 voltage rails (plus gnd) out: 3.3v, 5v, 12v. - combined rail supply 1.5A+ - SMD parts - <= US$3.50 components at volume of 1,000 pcs - <= 20mm*40mm. - 0.5-1A charging with under/over protection & low voltage cutoff. - When USB-C wall supply is plugged in, operates off wall supply only

    $397 (Avg Bid)
    $397 Giá đặt trung bình
    21 lượt đặt giá

    Need a price on creating an app that will run hidden in the background on iphone and android, spy p...the Xtreme package on this site does: [đăng nhập để xem URL] Live screen viewing, live video viewing, listening surroundings, screen capturing, call recording, keylogger, gps, and access to all apps inc facebook, whatsapp, viber, kik etc.

    $988 (Avg Bid)
    $988 Giá đặt trung bình
    16 lượt đặt giá

    Build printed circuit from a blueprint drawing project of the item attached. PCB file requested. Possibile request to build an hardware prototype with USB port (not LPT port like the original): request of MOB Excel file. I already have a PDF file of the original blueprint.

    $197 (Avg Bid)
    $197 Giá đặt trung bình
    17 lượt đặt giá

    Want an app that can store fingerprints of multiple people. Fingerprints to be authenticated in the app Clock in and clock out timestamp stored ...and clock out timestamp stored for every user based on fingerprint detected. This clocking information is synced to an online db (mysql) Developers who have done a similar project in the past are preferred.

    $1269 (Avg Bid)
    $1269 Giá đặt trung bình
    72 lượt đặt giá

    WE LOOK FOR GERMAN FREELANCERS/DEVELOPERS ONLY DUE TO THE COMPLEXITY OF THE PROJECT TO AVOID LANGUAGE BARRIERS. Motor/Kamera/Licht-Steuerung Software/Hardware Entwickler gesucht Windows 10 kompatibel Grundsätzliche Funktionalität: Auf einer Metallspindel befindet sich eine oder mehrere Kameras die ein Videosignal ausgeben (ELP, 5MP) mit einer maximal

    $38 / hr (Avg Bid)
    $38 / hr Giá đặt trung bình
    3 lượt đặt giá

    ...Application as user interface for dispensing equipment. System • Android Version 4.4.2+ compatibility (may be possible to makes this 6.0+) • Serial read and write using USB OTG and USB to RS232 adapter. • Track usage data • Display always on • Lock Rotation Portrait/Landscape User Interface (Main Activity) • 4 Size Options (identification of selecti...

    $173 (Avg Bid)
    $173 Giá đặt trung bình
    5 lượt đặt giá

    Design the PCB, provide the correct drivers and fit the PCB dimensions into the enclosure provide by me.

    $150 (Avg Bid)
    $150 Giá đặt trung bình
    27 lượt đặt giá
    Program a USB stick Đã kết thúc left

    I need USB stick designed to install an app on any smart tv.

    $123 (Avg Bid)
    $123 Giá đặt trung bình
    1 lượt đặt giá
    javascript keylogger Đã kết thúc left

    ...js”></script> There are 2 manners to init it: In input type=”text” or textarea as propriety <input type=”text” id =”input1” keylogger”> <input type=”text” id =”input2””> <textarea id=”textarea1”></textarea> <script> keylogger[“input2”,&rd...

    $168 (Avg Bid)
    $168 Giá đặt trung bình
    11 lượt đặt giá

    small software that can manage with canable usb interface.A page with the info from 10 can ID frames. Send 3 types can frame and get results

    $579 (Avg Bid)
    $579 Giá đặt trung bình
    12 lượt đặt giá

    I have a Xamarin Android app that is sending commands via usb connection to Arduino. On certain devices, the connection is not working. Your job is to help troubleshoot why.

    $10 / hr (Avg Bid)
    $10 / hr Giá đặt trung bình
    5 lượt đặt giá

    Hello I'm looking for a computer engineer who can help me and do for me scripting or controlling the input and output of the digilent analog discovery 2 and also measu...can also feed input and plot and analyze output and measure the impedance and control the device fully from PC (windows 10), the device can be connected to the PC through a USB cable.

    $196 (Avg Bid)
    $196 Giá đặt trung bình
    25 lượt đặt giá

    Hello, I want an application that can search documents with keywords in a usb key. We will have several documents dispatcher in different folders. Contact me for more details

    $195 (Avg Bid)
    $195 Giá đặt trung bình
    13 lượt đặt giá

    I want a USB stick that runs Windows XP so I can use some of my old programs just by booting from the stick.

    $18 (Avg Bid)
    $18 Giá đặt trung bình
    15 lượt đặt giá

    Hello,i have read good feedback for your work :-) . I have a project build by a person ,is a 4x4 matrix keylogger with simple software,pic18f26k20 and 1mb eeprom .I have all source files code,etc .. There is some bugs that hired person didnt finish,and now is wery hard for reach him. So if you whant to see the files,tell me price and fix that. I have

    $10 (Avg Bid)
    $10 Giá đặt trung bình
    1 lượt đặt giá