Bộ lọc

Tìm kiếm gần đây của tôi
Lọc theo:
Ngân sách
đến
đến
đến
Loại
Nhiều kỹ năng
Ngôn ngữ
    Tình trạng công việc
    233 yocto công việc được tìm thấy, giá theo USD

    ...skilled and experienced developer to help me with a Yocto project. I need to port the kernel from version 4.9-1.0.x-imx to version 4.17. . The two links below summarize what I want: The first contains the project link, to run it on your machine you will have to change the device to imx7d-pico and the machine command looks like this: MACHINE=imx7d-pico DISTRO=poky source setup-environment build and bitbake ipc-core-image-minimal And the second link is where the kernel that must be ported to the project above is located. The project will change from kernel 4.17 to 4.9-1.0.x-imx Note: The build has only worked on Ubuntu 18.04. You will probably need wsl2 or any machine with Ubuntu 18.04. first link: second

    $173 (Avg Bid)
    $173 Giá đặt trung bình
    3 lượt đặt giá

    I am looking for a skilled developer with experience in Yocto to modify and compile at91bootstrap and u-boot bootloaders and kernel source. The specific modifications needed include: - Change RGB LED settings in order to modify the color boot sequence - Adding custom drivers - Implementing security patches The ideal candidate should have: - Strong knowledge and experience with Yocto - Proficiency in modifying and compiling bootloader and kernel source code - Familiarity with adding custom drivers and implementing security patches The project has a preferred timeline of completing within 1 week. However, if you have a flexible schedule and can meet the requirements within a different timeframe, please let us know.

    $194 (Avg Bid)
    Gấp
    $194 Giá đặt trung bình
    5 lượt đặt giá

    Title: Yocto: Switch from sysVinit to systemd Overview: I am looking for a skilled freelancer who can assist me in switching the operating system from sysVinit to systemd in my yocto / poky project. I am not sure about the specific requirements for this switch and would appreciate some guidance. The project needs to be completed within 2 weeks. Requirements: - Expertise in yocto / poky development - In-depth knowledge of both sysVinit and systemd - Experience with system configuration and initialization processes - Strong understanding of Linux operating systems, specifically Ubuntu, CentOS, and Debian - Familiarity with yocto project structure and build processes Deliverables: - Detailed documentation outlining the steps required to switch from sysVinit to s...

    $250 (Avg Bid)
    NDA
    $250 Giá đặt trung bình
    7 lượt đặt giá
    The Yocto project (RT patches) Đã kết thúc left

    1. Check remote access connection, to test environment for building and debugging to be sure that all process will go smoothly (1-2 hours) 2. Applying of RT patches to the kernel, build image for testing (3-5 hours) 3. Image test and debug (1-4 hours), it depends if there are some changes which should be implemented specific to the rockchip kernel 4. Custom layer recipe development (1-2 hours)

    $41 / hr (Avg Bid)
    $41 / hr Giá đặt trung bình
    1 lượt đặt giá

    I am seeking a skilled developer to work on a Yocto Project that incorporates the RT-Preempt patch for Rock Pi E hardware by Radxa. You will be provided with SSH access to a system featuring: +Debian-based Linux +Cross-compiling tools already set up for Rock Pi +A functional Yocto2 environment configured for Rock Pi E +A working Yocto2 console image for Rock Pi E Requirements: +Experience with the Yocto Project and real-time preemptive kernels (RT-Preempt) +understanding of Rock Pi E hardware would be fine +Expertise in system optimization techniques for realtime os +Familiarity with Linux kernel development and customization +Your Responsibilities: Integrate the RT-Preempt kernel patch into the Yocto system Include all necessary components to compile and run the ...

    $164 (Avg Bid)
    $164 Giá đặt trung bình
    12 lượt đặt giá

    Need RDK DAC build Downloadable Application Containers (DAC) is a RDK initiative to develop an experience Yocto image experience poky and dunfell experience Create a simple DAC app installation process for Raspberry Pi

    $490 (Avg Bid)
    $490 Giá đặt trung bình
    15 lượt đặt giá

    Linux embedded SW developer, iMX6/Zynq we are looking for a skilled Linux embedded software developer to work on a project involving the iMX6 hardware platform (Variscite). The main functionality of the software will be to control 2 SPI peripherals (one Master and one Slave). the iMx6 is connected to an FPGA with the two SPI. both driver for Linux shall be developed and tested we have the dt...iMX6 hardware platform (Variscite). The main functionality of the software will be to control 2 SPI peripherals (one Master and one Slave). the iMx6 is connected to an FPGA with the two SPI. both driver for Linux shall be developed and tested we have the dts and rootfs, and we already started testing of he Master SPI (we will share code). SPI Slave has to be developed from scratch OS built with ...

    $577 (Avg Bid)
    $577 Giá đặt trung bình
    21 lượt đặt giá

    Looking for an experienced embedded Linux developer to help with the issue. The devices uses raspberry pi 3B+ and a TFT LCD in RGB mode as display and I run Qt’s distribution (b2qt) on it. When I enabled the logo support in Linux, no LOGO is displayed during kernel boot through TFT LCD. Moreover, the rainbow test does not show even though splash is not disabled. (but it worked on HDMI).

    $142 (Avg Bid)
    $142 Giá đặt trung bình
    10 lượt đặt giá

    I am looking for a skilled developer to create a Linux Yocto project for the NXP Imax8. The project requires the following features: - Install linux Debian OS - Install QT support library - and peripheral driver Link of Hardware Hardware requirements for the NXP Imax8 are specified. - Licensing for this project should be Open Source. Ideal skills and experience for this job include: - Proficiency in Linux Yocto project development - Experience with NXP Imax8 hardware - Strong knowledge of multimedia, networking, and security features in Linux - Familiarity with Open Source licensing.

    $110 (Avg Bid)
    $110 Giá đặt trung bình
    16 lượt đặt giá

    Looking for an experienced embedded Linux developer to help with the issue. The devices uses raspberry pi 3B+ and a TFT LCD in RGB mode as display and I run Qt’s distribution (b2qt) on it. When I enabled the logo support in Linux, no LOGO is displayed during kernel boot through TFT LCD. Moreover, the rainbow test does not show even though splash is not disabled. (but it worked on HDMI).

    $30 - $250
    Niêm phong
    $30 - $250
    7 lượt đặt giá
    SAMA5D27 - Yocto startup script Đã kết thúc left

    Write an initialization script using Yocto that will allow target machine (SAMA5D27) to automatically boot and run custom application at power up, preferably using systemd.

    $106 (Avg Bid)
    $106 Giá đặt trung bình
    6 lượt đặt giá

    I am looking for an experienced embedded Linux developer to help me with my project. The target hardware platform is the Raspberry Pi, and I need a custom bootloader with features for network booting, encryption support, as well as an IP discovery tool. The project must be completed within 3 months. I need a talented developer who can leverage the Yocto project to create the custom bootloader and get it up and running. The bootloader should be tailored to the specific needs of my project. Furthermore, I would like support for debugging capabilities should any issues arise during the development cycle. I'm looking for a reliable and experienced developer who can work within my specified timeframe and deliver an exceptional product. If you think you have the needed skills ...

    $8935 (Avg Bid)
    $8935 Giá đặt trung bình
    17 lượt đặt giá

    I am looking for a Unity programer who can help me to add control API using websocket or REST and build Uinity. I have a unity project programmed for webGL but needs to convert for Ubuntu and Windows changing JShook to API

    $534 (Avg Bid)
    $534 Giá đặt trung bình
    11 lượt đặt giá
    Yocto using SAMA5D27 board Đã kết thúc left

    I am looking for a freelancer with experience in using Yocto on a SAMA5D27 board. The specific version of Yocto we will be using is Kirkstone. The ideal candidate should have a strong background in Yocto configuration and experience working with SAMA5D27 boards. Basically, I have a modified ".dts" file and I need to rebuild the kernel and update the necessary files (.dtb, .itb, its) in order to boot successfully on the SAMA5D27 evaluation board. In addition, what I am looking is for a candidate to develop a detailed procedure on how to accomplish this having a new .dts file at hand.

    $175 (Avg Bid)
    $175 Giá đặt trung bình
    4 lượt đặt giá
    Yocto on SAMA5D27 Board Đã kết thúc left

    I am interested in finding a freelancer to help me with a Yocto project on a SAMA5D27 board. Although I have limited experience with Yocto, I do have a good understanding of embedded Linux. I need help customizing the kernel on the board by rebuilding it using a modified device tree source (dts) file. The main purpose of this project is to reconfigure and rebuild the kernel so it functions properly on the board with the updated dts file. Assistance may be needed with certain hardware peripherals, though I am familiar with the hardware and may need assistance later.

    $26 (Avg Bid)
    Gấp
    $26 Giá đặt trung bình
    11 lượt đặt giá

    We have started with a working Yocto Dunfell release from NXP that provides a limited OS. We have a layer from other manufacturers that permits building a Ubuntu-like release in Yocto, but are having trouble getting this layer to work with the NXP Dunfell.

    $31 / hr (Avg Bid)
    $31 / hr Giá đặt trung bình
    7 lượt đặt giá
    Програміст C++ Đã kết thúc left

    ...контроля версій Git. • Вміння користуватися командним рядком Linux. • Реляциійні БД, SQL. • Основи функціонування комп’ютерних мереж, протоколи TCP и HTTP. Знання HTTP/1.1. Знанння архитектури REST. • Багатопоточність. Буде плюсом: • C++14, 17, 20. • Qt. • Boost. • Засоби статичного і и динамічного анализа коду (cppcheck, clang-tidy, clazy, valgrind, gprof, …). • Розробка для embedded (buildroot, yocto, …). • Апаратні стандарти і протоколи (RS232, RS485, ModBus, …). Умови: • Стабільна компанія, своєчасна виплата заробітної плати. • Робота в офісі пн-пт 09.00/10.00 – 18.00/19.00. • Оплачувана відпустка - 24 к.д., лікарняні. • Комфортне робоче місце. • Можливості для пр...

    $2250 (Avg Bid)
    $2250 Giá đặt trung bình
    1 lượt đặt giá

    Hello, I have a custom yocto image for coral dev, but the pci is not working. The issue seems to be related to the device tree. I have old device tree that works fine with kernel 4.14 but the current device tree on kernel 6.1 is not working. For more details please contact me. Here is the issue i have: root@coral-dev:~# lspci root@coral-dev:~# dmesg |grep pci [ 0.000000] Kernel command line: root=/dev/mmcblk1p2 rootfstype=ext4 rw rootwait net.ifnames=0 pci=pcie_bus_perf [ 1.768491] imx6q-pcie : error -ENOENT: pcie_bus clock source missing or invalid [ 1.770620] imx6q-pcie : error -ENOENT: pcie_bus clock source missing or invalid [ 1.770645] imx6q-pcie: probe of failed with error -2 [ 1.796623] imx6q-pcie: probe of failed

    $45 (Avg Bid)
    $45 Giá đặt trung bình
    3 lượt đặt giá
    Custom yocto project Đã kết thúc left

    I need to build custom image with yocto for ARM

    $6 / hr (Avg Bid)
    $6 / hr Giá đặt trung bình
    3 lượt đặt giá

    Hello, I need someone to help with creating a yocto recipe to build electron for raspberry pi running wayland

    $185 (Avg Bid)
    $185 Giá đặt trung bình
    4 lượt đặt giá
    Yocto image for Coral Dev Board Đã kết thúc left

    Hello, I need help building Yocto (kirkstone) image for coral dev board. Currently I'm able to build the Linux itself and run it on the device but I need help to setup the GPU/VPU libraries (libimxdmabuffer, libimxvpuapi), gsreamer-plugins-imx package (and specifically the jpeg decoder) , the WiFI/Bluetooth adapter and move the image to MMC. Please let me know in your comment the following otherwise your application won't be considered: Experience with Yocto: Yes/No Experience with gstramer: Yes/No Access to Coral Dev Board: Yes/No I'll provide access to environment to setup and build the image. To finalize the project I'll need a procedure how to replicate your work to a fresh repository. As of now I'm using the following layer repo: (wip/kirkst...

    $145 (Avg Bid)
    $145 Giá đặt trung bình
    5 lượt đặt giá

    ...run a Webkiosk on a RaspberryPi. The Webkiosk should be a browser running in fullscreen displayed over HDMI. The browser accesses a webserver that runs locally on the Pi. The website is not in the scope of this task. The goal is to find a fitting technological software stack to display the website. These questions will have to be answered: - Which Operating System? RaspberryPi OS, Buildroot, Yocto etc. - What display method: Display Server yes/no, which one? Alternative? - What browser: Chromium, Firefox.. The software stack must meet following requirements: 1. Free & maintained 2. Good user experience 2.1 Low boot time (the less the better): 2.1.1: 10-20 sec.: Ok 2.1.2: 20-30 sec.: Tolerable 2.1.3: > 30 sec: Too much 2.2 Boot Logo / Animation 2.2....

    $31 / hr (Avg Bid)
    $31 / hr Giá đặt trung bình
    9 lượt đặt giá
    Yocto support Đã kết thúc left

    I need someone to help me with building boot2qt image for Raspberry pi and migrate qt versions and allow of compilation of plugins.

    $211 (Avg Bid)
    $211 Giá đặt trung bình
    6 lượt đặt giá
    Deep Learning Engineer -- 3 Đã kết thúc left

    We have been trained the model for NLP document suggestion and ranking, image classification and video. We're going to deploy these models on local environment as hardware like Raspberry PI 3 or 4 and Yocto. We need help to deploy these models as mentioned on Hardware OS. Please little study Yocto platform before. Thanks

    $22 / hr (Avg Bid)
    $22 / hr Giá đặt trung bình
    8 lượt đặt giá
    Raspberry Pi Đã kết thúc left

    Develop and customize a Yocto-based embedded Linux system for the Raspberry Pi 3 single-board computer. Develop Linux support for HC-SR04 sensor . Develop a module test application

    $24 (Avg Bid)
    $24 Giá đặt trung bình
    2 lượt đặt giá

    I need some help with my Yocto Project Everything compiles perfect , but my Openssl version is 3.0.5 and i need to change it to version 1.1.1q The folder /poky/meta/recipes-connectivity/openss has 1.1.1q but it pulls 3.0.5 from somewhere . Should be a easy task for someone thats clued up with Yocto.

    $139 (Avg Bid)
    $139 Giá đặt trung bình
    8 lượt đặt giá

    We have product and yocto bsp's, we need to build or develope this yocto project

    $414 (Avg Bid)
    $414 Giá đặt trung bình
    2 lượt đặt giá
    I need yocto developer Đã kết thúc left

    We have product and yocto bsp, we need to compile and release the OS

    $357 (Avg Bid)
    $357 Giá đặt trung bình
    3 lượt đặt giá

    In order to use the IMX477 camera with BalenaOS (based on Yocto), we need a developer to write the necessary kernel patch and builds us a custom BalenaOS. You can find the necessary information in this forum: Thank you! :)

    $182 (Avg Bid)
    $182 Giá đặt trung bình
    9 lượt đặt giá

    We have a RK3328 device running Yocto with linux 4.4. It has ES8316 audio codec but it is not configured properly. We need someone to configure it and fix some minor bugs. ( HDMI resolution detection error, Wake on LAN etc. ). Feel free to contact me for more information.

    $7 / hr (Avg Bid)
    $7 / hr Giá đặt trung bình
    2 lượt đặt giá
    Software Engineer C++ Yocto Đã kết thúc left

    ...appreciated. • Knowledge of tools like GNUMake, CMake, etc. • Yocto Project • Basic knowledge of Linux kernel, device drivers would be good plus. • Collaborating with the rest of the engineering team to design and deploy the code to test/production environment. • Debug, validate, review and test new and existing code. • Experience with Linux Environment (Kernal Level Knowledge). • In-depth knowledge of relational databases (e.g. MySQL, PostgreSQL) and NoSQL databases (e.g. MongoDB). Knowledge of distributed systems is a plus. • Experience using system monitoring tools, automated testing frameworks and implementing server-side security. • Version Control using GitLab. Benefits: • Deep-Tech Learning :– Operating System Buildin...

    $36 / hr (Avg Bid)
    $36 / hr Giá đặt trung bình
    4 lượt đặt giá

    I am trying to get the coral devboard to boot with buildroot. There is a yocto build to use as reference.

    $318 (Avg Bid)
    $318 Giá đặt trung bình
    8 lượt đặt giá

    I am trying to get the coral devboard to boot with buildroot. There is a yocto build to use as reference.

    $150 (Avg Bid)
    $150 Giá đặt trung bình
    9 lượt đặt giá
    RDK B DT router Đã kết thúc left

    Based on yocto RDK B raspberry pi board coding language c environment linux

    $311 (Avg Bid)
    $311 Giá đặt trung bình
    4 lượt đặt giá
    FPGA Programmer 1 Đã kết thúc left

    The project requires an Embedded Programmer having experience in Driver Programming for FPGA cards, PCIe Interface and YOCTO as well as upbringing the Linux OS. Please DO NOT APPLY, if you DO NOT HAVE THE REQUIRED EXPERIENCE.

    $371 (Avg Bid)
    $371 Giá đặt trung bình
    7 lượt đặt giá

    IoT Project for Elevator Management System. Need a software developer a Python programmer to configure Single Board Computer (SBC). Configure the SBC as follows: 1. Configure the READ function to collect the Data on RS-485 port from a Daisy Chained I/O modules. Architecture diag. attached ( max. 8- I/O modules with 45 connection each, daisy chained and connected with SBC on RS-485 port) 2. Configure the Master - Slave and daisy chaining. 3. Configure the MODBUS registry. 4. Configure WRITE function to receive command from Cloud application and trigger the I/O board. 5. Push the data to third party cloud solution in JASON format. 6. Make sure the data is collected and pushed on the cloud software successfully. 7. Need assistance after deployment in case any ambiguity arises. 8. GUI for int...

    $93 (Avg Bid)
    $93 Giá đặt trung bình
    4 lượt đặt giá

    ...to work with clients. Requirements/Qualifications: - 5 years of experience in embedded software development, C, C++ - 2+ years of experience with Embedded Linux - Working experience with the firmware layer - Fluency in English - Nice to have: yocto/linux Tasks: -Developing software for “State of the Art” IoT products for DAX listed German companies -Leading technical role, giving input to the software architecture -Product: smart home, new R&D for market release 2024 -Focus on the firmware layer, if wanted support towards the application layer -Yocto/Linux distribution Benefits: - Working on big projects in the German market you can get on your reference list - 100% remote work Start of first project: June/July 2022 Duration of projects: Between 6 to 12...

    $30 / hr (Avg Bid)
    $30 / hr Giá đặt trung bình
    11 lượt đặt giá

    I want my own kernel and image for the Radxa Rock PI E Board compiled with the yocto framework. there is an existing support with instruction is on this site: there are some problems when compiling raxda used and old branch dunfell and there are compiling errors with 2 packages. you got access to my linux debian server, where the yocto enviroment is installed. goal: + ready image for my sd card + bitbake -k radxa-console-image + documentation what was the solution + hourly recording about your work skills: embedded software Yocto Buildroot Linux programming C/C++

    $16 / hr (Avg Bid)
    $16 / hr Giá đặt trung bình
    5 lượt đặt giá

    I have Ubunto VM. I have installed Yocto dunfell image, ad built it correctly (command line full image). I have been able to boot my Raspberry Pi 400 successfully with it. Now I want to setup the SDK for the same. But not able to follow the detailed procedure well on Need somebody to do the job.

    $61 (Avg Bid)
    $61 Giá đặt trung bình
    1 lượt đặt giá

    Development of embedded near real time solutions on a Linux platform in a Yocto Project environment. Ability to emulate touch screen functionality from conceptual scetches, and actuate resultant hardware command instructions to analog hardware through I2C, USB, LVDS Display and SPI communications protocols will be required. Familiarity with TCP-IP over Ethernet interfacing as well as DICOM and HIS/RIS application protocols is a major plus. Project is currently centered on NXP i.Mx8m_Mini evaluation board. Familiarity with the programming of this board is a plus. Please provide a portfolio of work at this level for consideration. Projects that are actually being marketed and can be downloaded / evaluated today are preferred.

    $637 (Avg Bid)
    $637 Giá đặt trung bình
    16 lượt đặt giá

    I have Ubunto VM. I have installed Yocto dunfell image, ad built it correctly (command line full image). I have been able to boot my Raspberry Pi 400 successfully with it. Now I want to setup the SDK for the same. But not able to follow the detailed procedure well on Need somebody to do the job.

    $149 (Avg Bid)
    $149 Giá đặt trung bình
    3 lượt đặt giá

    Searching for Linux kernel developer, Network programmer, network device driver expert, yocto Linux expert.

    $24 / hr (Avg Bid)
    $24 / hr Giá đặt trung bình
    4 lượt đặt giá
    STM32MP157 expert Đã kết thúc left

    I am looking for an embedded linux expert who has experience about Yocto and STM32MP157. I have a MYD-YA-157C Development board of MyiR. I am looking for someone to guide me and want to make a partnership in some projects

    $510 (Avg Bid)
    $510 Giá đặt trung bình
    5 lượt đặt giá
    Embedded Linux Interrupt Driver Đã kết thúc left

    Please do NOT bid if you do not have the following experience This project requires an Experienced Embedded Programmer. 1. Prior experience in writing Interrupt Service Routines in Linux is a must 2. Prior experience with YOCTO is a must 3. Prior experience with Xilinx xDMA is a must 4. Prior experience with PCIe Interface is needed. 5. Familiarity with RISC-V architecture is a plus.

    $441 (Avg Bid)
    $441 Giá đặt trung bình
    5 lượt đặt giá

    I need to setup a development environment on my Ubuntu VM. I will build code for Raspberry Pi 400, with yocto embedded linux. Also, I will build the code locally so I'll need the SDK. And to enable remote debug I will use Netbeans or some other platform. Currently I am using Ubuntu VM and able to run and debug on Raspian OS. But now I want to shift to real embedded, where the application will be merged with the OS that will run as a real embedded system, using yocto. I am using all peripherals of Raspberry, and I am writing code in C.

    $156 (Avg Bid)
    $156 Giá đặt trung bình
    2 lượt đặt giá

    Hi, Basically, this issue needs to be resolved: It all starts when I try to follow this tutorial: issue: Reading file would overwrite reserved memory. Failed to load '

    $10 - $30
    $10 - $30
    0 lượt đặt giá
    Embedded Software Developer Đã kết thúc left

    ...work with clients. Requirements/Qualifications: - 5 years of experience in embedded software development, C, C++ - 2+ years of experience with Embedded Linux - Working experience with the firmware layer - Fluency in English - Nice to have: yocto/linux Tasks: -Developing software for “State of the Art” IoT products for DAX listed German companies -Leading technical role, giving input to the software architecture -Product: smart home, new R&D for market release 2024 -Focus on the firmware layer, if wanted support towards the application layer -Yocto/Linux distribution Benefits: - Working on big projects in the German market you can get on your reference list - 100% remote work Start of first project: May 2022 Duration of projects: Between 6 to 12 mont...

    $32 / hr (Avg Bid)
    Nổi bật
    $32 / hr Giá đặt trung bình
    11 lượt đặt giá
    Embedded software Developer Đã kết thúc left

    ...work with clients. Requirements/Qualifications: - 5 years of experience in embedded software development, C, C++ - 2+ years of experience with Embedded Linux - Working experience with the firmware layer - Fluency in English - Nice to have: yocto/linux Tasks: -Developing software for “State of the Art” IoT products for DAX listed German companies -Leading technical role, giving input to the software architecture -Product: smart home, new R&D for market release 2024 -Focus on the firmware layer, if wanted support towards the application layer -Yocto/Linux distribution Benefits: - Working on big projects in the German market you can get on your reference list - 100% remote work Start of first project: May 2022 Duration of projects: Between 6 to 12 month...

    $66 / hr (Avg Bid)
    Nổi bật
    $66 / hr Giá đặt trung bình
    16 lượt đặt giá

    ...documented. 5. XC7Z020-1CLG400C FPGA (or better, from the same series) from the Xilinx lineup is to be used. Verification will be carried out on the Digilent Zybo Z7 Board. Necessary drivers and bring-up to be provided as a set of Yocto packages B. Software/Firmware: 1. Host device for the interface detailed above shall be a BeagleBone Black device (), with the interface provided as a Cape, following the hardware interface specification for said capes 2. Device drivers and full Linux source image shall be provided as a fully integrated Yocto package - this will be bundled with the lower-level firmware and drivers referred to in hardware specification in (A) above 3. All source code shall be extensively documented and provision for both production and debug version

    $937 (Avg Bid)
    $937 Giá đặt trung bình
    4 lượt đặt giá

    I'm looking for someone to make a raspberry pi 4 yocto recipe for the driver found at this github.

    $615 (Avg Bid)
    $615 Giá đặt trung bình
    11 lượt đặt giá