
Closed
Posted
Paid on delivery
I need a detailed CFD study of several laboratory fume cupboards that routinely handle chemicals. The sole aim is to confirm their safety and containment performance, focusing specifically on three points: preventing leakage into the room, quantifying overall containment efficiency, and assessing operator exposure risk at the sash opening. You will receive the 3-D CAD geometry, operating sash heights, fan curves and boundary condition data. From this, set up and run steady-state and, where useful, transient simulations in ANSYS Fluent, OpenFOAM, or a comparable solver. Turbulence modelling, species transport for chemical tracers, and clear visualisation of velocity vectors and concentration iso-surfaces are essential. Deliverables • Solver-ready case and data files • High-resolution plots and animations of airflow and contaminant transport • A concise report summarising methodology, numerical settings, validation checks, and quantitative results for leakage rate, capture efficiency, and predicted operator exposure concentration • Actionable recommendations if any performance shortfalls are uncovered Acceptance is based on reproducibility of the setup, convergence evidence, and clarity of the final report.
Project ID: 40756979
57 proposals
Remote project
Active 3 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
57 freelancers are bidding on average £2,087 GBP for this job

Hello, I am a Strucutral engineer with 10+ years experience, I am expert in Structural analysis and CFD so i can do the required analysis and calculations in the required time. I have finished similar projects before and finished 600+ projects. Please check my portfolio and reviews. Thanks.
£1,500 GBP in 7 days
8.3
8.3

An empty sash opening makes containment look better than it is. A standing operator creates a wake at the sash that can draw tracer into the breathing zone. So I'd put a body-shaped figure in front of each cupboard and sample at head height. I've run CFD for a client before. I'd start with one cupboard at its working sash height and share the velocity and concentration plots first. Then you can check the views before I run the rest. You'd get the case files and the plots for each sash height plus a short report on leakage and exposure. Does your CAD include the room and its supply air or just the cupboards?
£3,000 GBP in 21 days
7.7
7.7

Hi there, I can perform the CFD safety and containment analysis of your laboratory fume cupboards using ANSYS Fluent, focusing on airflow behaviour, room leakage, containment efficiency, and operator exposure near the sash opening. I can handle CAD preparation, mesh independence, turbulence modelling, species transport for chemical tracers, steady/transient simulations, convergence verification, and detailed post-processing of velocity and concentration fields. Deliverables will include the solver-ready CFD files, high-resolution contours/streamlines/animations, quantitative containment and exposure results, convergence/validation evidence, and a concise technical report with recommendations. I have strong experience in ANSYS Fluent CFD, HVAC/ventilation airflow and contaminant transport analysis. Could you confirm which standard or acceptance criteria should be used for the fume cupboard safety assessment? Best regards, Arati M.
£2,250 GBP in 7 days
6.7
6.7

With over a decade of experience in engineering with a particular emphasis on CFD studies, I am confident in my ability to successfully complete your project. I have extensive knowledge and usage experience with several industry-standard solvers including ANSYS Fluent, OpenFOAM which will certainly play a vital role in assessing the safety of your fume cupboards. My specialties include turbulence modeling, species transport for chemical tracers, and clear visualization of complex data like velocity vectors and concentration iso-surfaces – all absolutely crucial for your project. My technical abilities go hand in hand with my commitment to delivering meaningful results. I understand that the project isn't complete until you understand every aspect of it, which is why I ensure precise documentation, concise reports outlining methodology and numerical validation checks. This provides you not just with the 'what' but also the 'why' behind the recommendations that I offer - another attribute that ensures my suitability for this project. Overall, consider me as an engaging package - Relevant training and profound experience partnered with an extreme eye for detail and attention to ensuring clarity down to every level. Let me partner with you to ensure the safety of occupants by meticulously evaluating containment efficiency and operator exposure risk while handling chemicals in the fume cupboard.
£1,500 GBP in 3 days
6.3
6.3

The key challenge here is not simply visualising airflow, but quantifying whether contaminants escape through the sash and the resulting operator exposure. I would focus the CFD study on containment efficiency, leakage paths, sash-plane airflow and contaminant concentration in the operator breathing region. I can develop the models in ANSYS Fluent, using an appropriate turbulence model together with species transport/tracer modelling. I would establish converged steady-state solutions for the supplied sash positions and fan conditions, followed by transient simulations where needed to capture temporary contaminant escape or unstable flow. The study will include mesh refinement around the sash, exhaust and critical mixing regions, along with convergence, mass-balance and mesh-sensitivity checks. Results will include velocity vectors/streamlines, contaminant concentration contours and iso-surfaces, leakage rate, capture efficiency and predicted operator exposure concentration. I will provide the complete solver files, high-resolution plots/animations and a concise report with methodology, validation checks, quantitative findings and practical recommendations for any containment issues identified. I have experience with CFD airflow, species transport, ventilation and flow-distribution studies, including identifying recirculation, stagnation and undesirable flow paths.
£2,250 GBP in 7 days
6.3
6.3

As a CFD specialist, I am well-equipped to handle the demands of your project due to my extensive experience in mechanical engineering, specifically in HVAC and fluid dynamics. Through my vast exposure to Industrial Safety and dynamic fluid system, I understand the gravity of maintaining efficient laboratory fume cupboards and ensuring optimal safety for operators. My proficiency ranges across various CAD software including Ansys Fluent, ensuring that I can accurately set up and run steady-state and transient simulations that you require for this project. Over the years, I’ve fine-tuned my turbulence modeling, species transport, and visualization skills for airflows and chemical tracers which aligns perfectly with what you're looking for. You can expect high-resolution plots, animations to depict airflow and contaminant transport from me. Aside from my technical qualifications, I always prioritize clear communication with clients throughout the project. Hence, along with providing a comprehensive report of your lab's situation at every step of the way; from numerical settings to predictive results with any shortfalls I uncover; I offer actionable recommendations tailored to address specific concerns discovered during this study. Trust me to deliver nothing short of excellence!
£3,000 GBP in 30 days
5.7
5.7

Hi there, This is Mohand, a professional CFD and engineering designer with experience in airflow analysis, ventilation systems, computational fluid dynamics, and contaminant transport. I can develop a reproducible CFD workflow to evaluate fume cupboard containment, room leakage, and operator exposure at the sash opening. Scope of Work: ☑️ Import and prepare the provided 3D CAD geometry, sash positions, fan curves, and boundary conditions ☑️ Set up steady-state and transient ANSYS Fluent/OpenFOAM simulations as appropriate ☑️ Apply suitable turbulence and species-transport models for chemical tracer analysis ☑️ Evaluate airflow patterns, leakage into the room, containment efficiency, and operator exposure concentration ☑️ Generate velocity vectors, concentration contours, iso-surfaces, and high-resolution animations ☑️ Provide convergence evidence, validation/quality checks, solver-ready case/data files, and a concise technical report ☑️ Recommend practical design or operating improvements if containment performance is below the target I will clearly document the mesh, numerical settings, boundary conditions, solver controls, convergence criteria, and quantitative results so the analysis can be reproduced and reviewed. Please share the CAD geometry, operating conditions, fan curves, and target acceptance criteria so I can review the setup and confirm the CFD approach. Best Regards, Mohand
£2,250 GBP in 7 days
5.2
5.2

As an engineer with a deep understanding and experience in Computational Fluid Dynamics (CFD), I can assure you that I am the ideal candidate to handle the detailed safety analysis of your laboratory fume cupboards. With proficiency in ANSYS Fluent and OpenFOAM, I will diligently utilize the 3-D CAD geometry, fan curves, operating sash heights, and other relevant data at my disposal to execute steady-state and transient simulations necessary to assess containment performance and operator exposure risk. Turbulence modelling and species transport for chemical tracers are second nature to me, as is providing clear visualizations of velocity vectors and concentration iso-surfaces. This ensures that the airflow and contaminant transport in your fume cupboards are accurately captured, studied, and effectively communicated in high-resolution plots and animations. Additionally, with an impressive record in project coordination and workflow documentation, you can expect nothing but reproducible setups, well-established numerical settings, unambiguous validation checks within my deliverables. Alongside this validation evidence of reproducibility, you get a concise report summarizing my methodology used to provide quantitative results on leakage rate, capture efficiency, and predicted operator exposure concentration. Let's work together for an efficient solution that guarantees not only safety but optimal productivity too.
£1,500 GBP in 7 days
5.4
5.4

Hello I checked your project, and the main focus is a reproducible CFD safety study for fume cupboards, covering room leakage, containment efficiency, and operator exposure at the sash opening. I have experience with technical data analysis and simulation-oriented workflows, and I understand the need to combine airflow modelling with species transport rather than relying on velocity results alone. I would set up the supplied CAD geometry, fan curves, sash positions, and boundary conditions in ANSYS Fluent or OpenFOAM. The study would include suitable turbulence modelling, steady-state cases, transient analysis where needed, mesh and convergence checks, contaminant concentration iso-surfaces, exposure calculations, and clear plots or animations. The final package would contain solver-ready files and a concise report with quantitative findings and practical recommendations. Could you confirm the chemical tracer properties, intended turbulence model preference, and whether experimental containment data is available for validation? That will help define the species boundary conditions and acceptance checks correctly. Best regards.
£5,000 GBP in 64 days
4.8
4.8

Hi, I can carry out the CFD safety assessment of your laboratory fume cupboards with a clear focus on the three required performance criteria: room leakage prevention, overall containment efficiency, and operator exposure at the sash opening. Using your CAD geometry, sash positions, fan curves, and boundary-condition data, I can set up and run the required steady-state and, where useful, transient simulations in ANSYS Fluent or OpenFOAM. The study will include: • Appropriate turbulence modelling • Species transport for chemical tracers • Airflow and contaminant transport analysis • Velocity vectors and concentration iso-surfaces • Quantification of leakage rate • Quantification of capture/containment efficiency • Predicted operator exposure concentration at the sash opening • Convergence evidence and validation checks Deliverables will include solver-ready case/data files, high-resolution plots and animations, and a concise technical report covering the methodology, numerical settings, validation, quantitative results, and practical recommendations where performance shortfalls are identified. My background in CFD, turbulence modelling, species transport, and engineering simulation makes this project a strong fit for my experience. I am available to begin as soon as the CAD and operating data are provided. Best regards
£1,800 GBP in 15 days
5.0
5.0

Having worked extensively with 3D CAD in different contexts such as architectural design, lighting design, and even 3D plan rendering, I have developed a deep understanding of the software that would be perfect for your CFD study. I am confident that my skills with programs such as SolidWorks, AutoCAD, and ANSYS Fluent will enable me to accurately process and interpret the data you provide for the simulations. I also have experience with species transport for chemical tracers which will be essential for analyzing containment efficiency in your fume cupboards. Moreover, my attention to detail and insistence on delivering high-quality work make me a great fit for this project. I ensure that complex simulations are set up correctly and run efficiently for reproducibility. Your demand for clear visualizations is an area where I excel, and I feel confident in capturing concentration iso-surfaces and velocity vectors perfectly.
£1,545 GBP in 2 days
5.3
5.3

Hi, how are you doing? I went through your project description and I can help you in your project. your project requirements perfectly match my expertise. We are a team of Expert Mechanical design Engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: Product Design | 3D CAD Modelling Finite Element Analysis | Computational Fluid Dynamics Thermal analysis | Structural analysis HVAC and Heat load calculation Structural Analysis We are proficient in using following software’s: AUTOCAD SOLIDWORKS ABAQUS ANSYS APDL | ANSYS Fluent MATLAB | SIMULINK COMSOL Multiphysics FUSION360 | CATIA We have good command over REPORT WRITING, we can show you many samples of our previous reports. We can discuss further details in the message box.
£2,250 GBP in 7 days
5.7
5.7

I understand you need a robust CFD analysis to confirm fume cupboard safety and containment. My experience with similar airflow and contaminant transport simulations, specifically for enclosed environments like HVAC systems and industrial enclosures, directly aligns with your need to prevent room leakage and quantify containment efficiency. I've successfully used CFD to pinpoint critical leakage pathways and validate performance metrics under various operating conditions. My approach will involve leveraging ANSYS Fluent for this project. I will import your provided CAD geometries and apply validated boundary conditions, including sash heights, fan curves, and relevant air properties. For turbulence modeling, I will select an appropriate RANS model (e.g., k-omega SST) for steady-state analysis to capture overall flow patterns and containment. Transient simulations will be employed where necessary to assess dynamic phenomena like operator exposure during sash adjustments or transient chemical release events. Mesh quality will be meticulously checked, and validation against established safety criteria will be a core part of the process. To ensure we're perfectly aligned, could you clarify if specific industry standards or regulatory guidelines (e.g., ASHRAE, EN 14175) will be used as the primary benchmark for "safety" and "containment efficiency"? Additionally, are there any particular chemical types or release scenarios you anticipate as the most critical for operator exposure assessment? I'm eager to discuss how my expertise can deliver the definitive safety analysis you require.
£2,330 GBP in 21 days
4.7
4.7

Hi, I can help with the CFD study of your laboratory fume cupboards. I can set up steady-state and transient simulations using ANSYS Fluent or OpenFOAM, including turbulence modelling, species transport, airflow analysis, and chemical tracer dispersion. I will provide velocity and concentration visualisations, leakage and containment results, operator exposure assessment, solver-ready files, and a clear technical report with convergence and validation checks. I can also identify any performance issues and provide practical recommendations for improvement. Please share the CAD geometry and operating conditions so I can review the scope.
£2,250 GBP in 7 days
4.6
4.6

Hi, I am a Mechanical Design Engineer and co-founder at Vutuk Design and Media. We specialize in computational fluid dynamics (CFD) containment analysis, HVAC airflow modeling, species transport tracking, and safety performance validation (ASHRAE 110 / EN 14175 standards) using ANSYS Fluent, SolidWorks Flow Simulation, and Fusion 360. A few quick technical questions to align with your fume hood CFD scope: What is the target face velocity (e.g., 0.3 to 0.5 m/s) and exhaust volume flow rate, and do you require steady-state or transient analysis for varying sash positions? What specific gas species, chemical fumes, or particulate release scenarios are being modeled for exposure risk assessment? Do you require comprehensive CFD simulation reports (velocity vector contours, concentration streamlines, pressure drops) alongside actionable design recommendations to eliminate dead zones and improve containment? Looking forward to reviewing your fume hood CAD geometry and delivering a rigorous safety CFD analysis! Best regards, Ashraf Ali Shaikh
£2,250 GBP in 7 days
4.5
4.5

Greetings! I can run a detailed CFD study of your laboratory fume cupboards to confirm safety and containment performance, focusing on preventing leakage into the room, quantifying overall containment efficiency, and assessing operator exposure risk at the sash opening. Working from your 3D CAD geometry, operating sash heights, fan curves, and boundary condition data, I will set up and run steady-state and, where useful, transient simulations in ANSYS Fluent, OpenFOAM, or a comparable solver, using appropriate turbulence modelling and species transport for chemical tracers. You will receive solver-ready case and data files, high-resolution plots and animations of airflow and contaminant transport, and a concise report covering methodology, numerical settings, validation checks, and quantitative results for leakage rate, capture efficiency, and predicted operator exposure concentration, plus actionable recommendations if any shortfalls appear. The setup will be reproducible, with convergence evidence, and the final report clear and easy to review. Thanks, Revival
£1,500 GBP in 30 days
4.1
4.1

Hi, I reviewed your project scope for "CFD Safety Analysis for Fume Cupboards". Producing high-impact documentation requires clear structure, audience-aligned tone, and rigorous editorial consistency. My structured workflow: 1. Scope & Guidelines Review: establishing formatting templates, terminology standards, and required sections. 2. Drafting & Synthesis: crafting the content with clarity, compelling flow, and meticulous detail. 3. Editorial Review: performing thorough proofreading passes for grammar, formatting uniformity, and presentation. You will receive polished, professionally formatted documents in both editable (.docx) and presentation-ready (.pdf) formats. I also include 7 days of free post-delivery support — any adjustments or minor revisions after handoff at no extra cost. I am available right here in the platform chat to review your specific details and get started immediately.
£1,764 GBP in 5 days
4.1
4.1

Hello, I reviewed the requirements, and the core challenge is evaluating fume cupboard containment under realistic operating conditions, with particular attention to room leakage, capture efficiency, and operator exposure near the sash opening. I would focus on robust CFD setup in ANSYS Fluent or OpenFOAM, appropriate turbulence and species transport models, convergence and validation checks, and clear visualisations supported by quantitative results and a reproducible technical report. I have worked on similar 3D modeling, technical simulation, and engineering documentation projects and can share relevant examples once we connect in chat. Also a quick question, could you please clarify whether you have experimental containment or tracer-gas test results available to validate the CFD predictions against measured performance? Best Regards, Muskan.
£1,500 GBP in 1 day
3.9
3.9

As an experienced data analyst and mechanical engineer, I am confident I'm your best candidate for this project. With a significant track record of tackling complex challenges through engineering analysis and design, I am well versed in utilizing tools like ANSYS Fluent, OpenFOAM, and more to deliver precise and reliable results. My proficiency in turbulence modeling, species transport for chemical tracers, and clear visualization techniques will enable me to provide you with comprehensive insights into your laboratory fume cupboards' safety performance. In addition to complying with all your listed deliverables, my report will provide invaluable recommendations should any performance shortfalls be uncovered as a result of the CFD study. This is an important aspect of the project as it ensures you're not only aware of any potential safety issues but also equipped with actionable steps to address them.
£2,250 GBP in 3 days
3.5
3.5

Hi, I'm a CFD engineer (2.5 years as an Ansys Fluent application engineer) with 3+ years designing ventilation for healthcare facilities, so containment and exposure are familiar territory. Plan: I'll model each cupboard inside a room domain with an operator manikin at the sash, then mimic the EN 14175-3 / ASHRAE 110 tracer test using SF6 species transport and k-ω SST. Leakage is measured on the outer plane, capture efficiency from the source-to-exhaust mass balance, and breathing-zone concentration at the manikin. I'll run each sash height, plus a cross-draught and operator-movement transient where useful. You'll get case/data files, mesh and convergence evidence, vector and iso-surface plots with animations, and a concise report with clear pass/fail results and fixes for any shortfall. Quick questions: how many cupboards, which standard you're working to, and are room supply diffuser locations included? Karam
£2,250 GBP in 7 days
3.6
3.6

Edinburgh, United Kingdom
Member since Oct 8, 2026
₹12500-37500 INR
$5000-10000 AUD
£20-250 GBP
$250-750 USD
₹12500-37500 INR
₹600-1500 INR
₹1500-12500 INR
$250-750 USD
$10-30 USD
$250-750 USD
$30-250 USD
$30-250 USD
min $50 USD / hour
$150-300 USD
$1500-3000 USD
₹600-1500 INR
$200-600 USD
₹1500-12500 INR
$10000-20000 USD
₹600-1500 INR