Senior UAV Engineer Needed

@Ekarthaan

Hi Stephen W., Just last week I completed a similar task successfully, so I can get started on this without any ramp-up time. 1) Confirm airframe and propulsion for UQSD‑30H/70FV (VTOL fixed‑wing or multirotor), MTOW, power bus (V/Amps), and target endurance? 2) Preferred autopilot stack/hardware (PX4/ArduPilot on Pixhawk/CUAV/Skynode), required datalinks/bands (UHF/LTE/SATCOM), and EO/IR ISR bitrate/latency? 1) Use a modular payload/power architecture: keyed connectors, regulated 5/12/24V rails with EMI filtering, and isolated grounds; faster swaps, cleaner video. 2) Add redundancy/observability: dual IMU/compass, redundant power, CAN/Ethernet sensor backbone, onboard health telemetry with pre/post‑flight analytics, plus HITL CI for parameters. Action Plan: Phase 1—Requirements & architecture (CONOPS, budgets, ICDs, RF plan, UK/NGA regulatory path). Phase 2—Bench integration (autopilot, PDB, ESCs, datalinks), HITL and sensor bring‑up. Phase 3—Prototype build for 30H: harnessing, EMI/thermal, ground runs. Phase 4—Payload/ISR: gimbal control, video encode, link tuning, power optimization. Phase 5—Flight tests: captive, envelope expansion, failsafe validation, tuning; iterate. Phase 6—Production readiness: BoM freeze, DFM, jigs, work instructions, end‑of‑line tests, spares; demo support. Best Regards, Sid

@Ryan15222

My name is Dũng, and I am an experienced UAV and automation systems specialist. Throughout my 5-year career, I have developed a strong skill set ranging from Aerospace and Electrical Engineering to Robotics and Software Development - all skills directly relevant to the UAV engineer role you are seeking to fill. Having worked on various UAV projects before I possess hands-on experience with sensor technologies which I understand is a key requirement for this position. One of my key experiences stems from a project similar to yours where we successfully built and deployed two operational UAV prototypes within a tight schedule. My work has been cross-functional, collaborating effectively with teams of mechanical designers, software engineers and technicians to achieve common goals. This has given me an in-depth understanding of the importance of integration, and a hands-on ability to configure autopilot with fail-safe systems – precisely the kind of technical competence your team will need. I believe BVLOS experience is crucial to any qualified UAV engineer, hence I have pursued and achieved proficiency in this area as well. On top of that, my deep understanding in RF systems will prove invaluable when dealing with payload integration - such as EO/IR, thermal, and communication systems - tasks I have accomplished on numerous occasions.

@Alif2710

With over eight years of experience in military and avionics, as a professional electronic and embedded systems engineer, and extensive knowledge in UAV systems like Pixhawk, PX4, ArduPilot - I consider myself an ideal candidate for this role. I have hands-on expertise in drone building, testing, and flight trials along with an ability to configure autopilot and fail-safe systems. My forte lies not only in designing UAV systems with meticulous integration of flight controllers, GPS, telemetry, and comms but also optimizing performance and power which I believe would be essential for this project. Moreover, my experience of over 3 years in switching mode power supply would be a value-add in achieving manufacturing readiness and defining assembly and testing processes. Feel free to chat and discuss with me, I will be happy to help you Best Regards, Alif

@electronicsdone

Best Senior UAV Systems Integration Engineer! ⭐⭐⭐⭐⭐ Dear Client, What makes a UAV program succeed is not just selecting the right flight controller, payload, or telemetry link. It is whether the full platform is integrated, validated, and matured in a way that is genuinely flight-ready, mission-capable, and scalable beyond a single prototype. That is where I can add value. For a role like this, the real challenge is not isolated engineering tasks. It is making sure autopilot integration, RF/telemetry, payload power and interfaces, fail-safe behavior, airframe-electronics coordination, flight-test feedback, and production-readiness all move together as one system. I would approach this as an end-to-end UAV development and integration program — with focus on technical closure, disciplined validation, and practical progress toward reliable prototypes and repeatable builds. A few questions from my side: 1. Are UQSD-30H and UQSD-70FV fixed architectures already, or are key platform decisions still open? 2. Is the immediate priority stable flight and payload integration, or a demonstration-ready ISR platform? If you message me, I can also share relevant hardware/system integration work and explain how I would structure the development flow so the prototypes move toward dependable flight readiness rather than fragmented iteration. Best regards, Avi Gupta PCB Must Innovations

@OutsourceMan

⭐⭐⭐⭐⭐ As a seasoned professional in technical documentation, I realize the immense significance of reliable and comprehensive documentation in the realm of cutting-edge technologies such as UAV systems. My success and satisfaction lies not only in creating end-to-end technical documentation for UAV systems akin to your project but also in the fact that my work helps guide technicians and junior engineers to perform at their very best. Furthermore, my deep appreciation of diverse technologies including PHP, WordPress, WooCommerce, and data scraping combined with my considerable 18 years' experience will provide your London or Nigeria-based team an unrivaled edge in this niche. I am particularly skilled with React Native technology which is of paramount relevance to your requirement of efficient payload integration for EO/IR, thermal, comms systems. With me on board, be assured of exhaustive documentation with nuances and insights that can only stem from profound industry experience. By attaining stable ISR capability within the first six months itself and ensuring successful live demonstrations, I'll propel your project ahead while simultaneously supporting its transition to production efficiency. Decisively choose success by picking me for the role: let's create sophisticated solutions together!

@Zack111Arya97

Hello dear client,☺️ ​I am Zakaria, a Master’s graduate in Automatics and Systems My entire academic career and professional research have been dedicated to the advanced control, modeling, and stabilization of Unmanned Aerial Vehicles (UAVs). ​Why I am the best fit for your Senior UAV Engineer role: ​✅ Advanced Control & Decoupling Mastery: I specialize in the mathematical modeling of non-linear aerial systems. My research focus is on implementing advanced control techniques to eliminate cross-coupling in UAV dynamics, ensuring total stability and high-precision mission performance even in turbulent environments or complex maneuvers. ​✅ Full-Stack UAV Integration: I have extensive hands-on experience with the Pixhawk, PX4, and ArduPilot ecosystems. I don’t just "plug in" components; I architect the entire system—integrating flight controllers, GPS, telemetry, and EO/IR payloads—while optimizing power distribution and fail-safe protocols for mission-critical reliability. ​✅ Prototype to Production Excellence: With my strong analytical background and rigorous testing experience, I am ready to lead the development of the UQSD-30H and UQSD-70FV platforms. ​I am ready to review your current UQSD specifications and ISR requirements to begin the flight-ready integration immediately.

@ssumitkumar7800

As an engineer with a vast range of skills in electronics and mechanical engineering, I believe I am exceptionally suited to take on the UAV Engineer position. My extensive experience in designing and integrating complex systems like flight controllers, telemetry, GPS and comms make me a natural fit for the role. Not only have I honed my abilities to build and test UAV systems over the years, but I'm also deeply knowledgeable in sensors and RF systems, which are crucial for developing ISR capabilities. To underscore my competence further, let me highlight some achievements: In addition to successfully delivering multiple drones models to clients, with two currently deployed for critical defence monitoring jobs. I've also managed teams effectively through tasks from design ideation to production – ensuring stability and performance at each stage of development. The opportunity given will be maximally optimized and given the best attention it deserves even on project completion. I look forward to discuss ways we can collaborate towards achieving your six months success metrics. Looking forward to discussing more about this opportunity with you.

@mubeenm5026

I am Mubeen Khan, CEO of Web Crest, and my team and I specialize in turning innovative ideas into powerful, scalable digital solutions that truly perform. With a strong focus on practical innovation over my 10-year career, and a team of 10 skilled professionals by my side, we have developed a deep expertise in UAV technology, the use of AI automation and web development. Coming to your project's requirements, I hold a Bachelor’s degree in Robotics which adds to my skills and experience. Not only have I led end-to-end technical developments before but have also closely worked with mechanical and software teams. This will prove invaluable as we integrate flight controllers, GPS, telemetry, comms, configure autopilot and fail-safe systems for you. Moreover, Web Crest has an impressive track record in completing projects successfully with our clients reaping big rewards from our work. My adeptness with UAV systems such as the Pixhawk, PX4, ArduPilot; hands-on drone build and testing experience; knowledge of RF systems and sensors make me an ideal candidate for delivering 2 working UAV prototypes within the first six months ensuring the flight readiness and manufacturing transition. Additionally, having prior BVLOS experiences would add value to the success metrics you have outlined.

@spodstechno

Hello, With my deep experience in software development, I'm well-equipped to handle the technical intricacies of this Senior UAV Engineer role. I've spent over five years working on diverse projects and have a comprehensive understanding of crucial software and hardware interconnections, which aligns perfectly with your requirement for integrating flight controllers, GPS, telemetry, and comms. On top of that, I have a proven track record (350+ Web Apps Completed) which demonstrates my capability to build UAV systems and conduct relevant testing. Additionally, my extensive knowledge of RF Systems and sensors including the Ardupilot will surely be an asset to your project. My exposure to Defense systems also makes your 'Nice to Have' qualities part of my core competencies and endorses my ability to enable production readiness. In summary, hiring me is more than just gaining a freelancer as I approach each project with the intention of turning ideas into successful products through strict adherence to deadlines and transparent communication for long-term support. Pairing those qualities with our shared goal of delivery 2 working UAV prototypes in six months while maintaining stable ISR capability and conducting successful live demonstrations, I am confident that we can achieve beyond the expected results Thanks!

@DngPhgNam

⭐⭐⭐⭐⭐ ✅Hi there, hope you are doing well! I have led UAV system integrations and prototype developments where seamless collaboration with mechanical and software teams ensured flight-ready and reliable platforms easily. The most important part to successfully complete this project is precise integration and optimization of flight controllers, communication, and payload systems based on rigorous testing and iteration. Approach: ⭕ Assess and integrate all UAV components including flight controllers and sensors ⭕ Configure and optimize autopilot and fail-safe mechanisms ⭕ Develop and test UQSD-30H prototype with collaboration across teams ⭕ Conduct comprehensive flight trials and enhance platform based on data ⭕ Prepare manufacturing processes and document thoroughly ⭕ Provide leadership to guide and build junior teams ❓ What are the current development stages of UQSD-30H and UQSD-70FV? ❓ Are there any specific challenges with RF or sensor integration? ❓ Will access to existing documentation be provided? I am confident my extensive hands-on UAV and embedded systems experience will make significant contributions to your project goals. Looking forward to the opportunity to collaborate. Best regards, Nam

@KeyanRibberts

Hi there, I am excited to apply for the Senior UAV Engineer position you have outlined. With extensive experience in UAV system development and integration, I am confident in my ability to lead the technical development of UAV platforms that are flight-ready and mission-capable. I hold a degree in Aerospace Engineering and have hands-on experience working with UAV systems like Pixhawk and PX4, coupled with a solid background in electrical and mechanical integration. My previous projects involved the successful development of various UAV prototypes, including those with complex payload configurations. I am particularly skilled in flight testing and data analysis, ensuring optimal performance results. I look forward to discussing how I can contribute to your team in Abuja or Lagos. I estimate a timeline of 6 months to deliver the required prototypes and achieve stable ISR capability, which aligns with your success metrics. Best regards, Keyan