
Completed
Posted
Paid on delivery
I’m building a wireless sensor-monitoring device based on the ESP32 that must communicate over both Wi-Fi and Bluetooth. The job starts with clean, well-documented schematics and a production-ready PCB layout in Altium Designer. Once the files are complete, I’ll need you to run signal-integrity and power-domain simulations, assemble a prototype on your own board, and share detailed test logs that prove stable dual-radio operation and sound sensor readings. Please include a detailed project proposal that outlines: • the architecture you plan to follow • the equipment you’ll use during simulation and bench testing • a realistic timeline for schematic, layout, prototype, and final report delivery Deliverables • Block diagram, BOM, and draft schematic • Final Altium schematic and PCB artwork (Gerber, pick-and-place, assembly drawings) • Simulation screenshots and raw data • Prototype test report covering Wi-Fi + Bluetooth range, current draw, and sensor data integrity Acceptance criteria: the board boots reliably from a 3 V 3 rail, programs over USB-UART without errors, and shows zero packet loss in your bench tests. If you’re confident in your ESP32 and PCB design skills and already have the hardware to prove it, I look forward to your proposal.
Project ID: 40788075
58 proposals
Remote project
Active 5 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs

Hello, I'm interested in your ESP32 wireless sensor-monitoring project and would be happy to assist with the complete hardware design, simulation, and prototype validation. Our team can support Altium schematic design, PCB layout, signal-integrity analysis, power-domain verification, and Wi-Fi/Bluetooth testing. **Proposed Architecture:** ESP32 with integrated Wi-Fi/Bluetooth, 3.3V power regulation, USB-UART programming, sensor interfaces, and optimized RF antenna placement. **Simulation & Testing:** We plan to use Altium simulation tools and suitable bench equipment, including an oscilloscope, multimeter, power analyzer, and RF test setup to evaluate signal integrity, power consumption, wireless performance, and sensor accuracy. We can provide editable Altium files, Gerbers, assembly documentation, simulation results, and detailed prototype test reports. We're available to get started promptly. Please share your sensor specifications, board dimensions, and performance requirements so we can finalize the scope. Looking forward to working with you. Best regards!
$140 USD in 7 days
2.4
2.4
58 freelancers are bidding on average $164 USD for this job

Greetings, I worked on an ESP32-based vehicle alignment system using calibrated load cells, an inclinometer, and BLE communication to send sensor readings to an iPad. One of the main challenges was keeping sensor readings accurate while handling wireless communication, which involved FreeRTOS task management, filtering, and calibration. For your device, I'd use an ESP32 module with a proper RF antenna layout, stable 3.3V power supply, sensor interfaces, USB-UART programming, and debugging test points. I'll review signal integrity and power distribution through simulation, then use an oscilloscope, bench power supply, logic analyzer, current measurements, and Wi-Fi/BLE packet logging during prototype testing, including checking packet loss under defined test conditions. I estimate 4–5 days for the architecture, BOM, and schematic, 1–2 weeks for Altium PCB layout and manufacturing files, 2–3 weeks for fabrication and assembly, and another week for hardware testing and the final report with simulation results and raw logs, around 5–7 weeks overall. Could you share which sensors you're planning to use and the expected Wi-Fi/Bluetooth communication range? Sincerely, Oleksandr
$200 USD in 2 days
8.4
8.4

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience with ESP32 hardware, Altium PCB design and wireless sensor products, from concept through production. I would build around an ESP32 module with a clean 3.3 V power domain, USB-UART programming and suitable sensor interfaces, paying close attention to grounding, decoupling and antenna clearance. I can also support the firmware needed for validation. I would simulate critical signal paths and power behavior, then assemble a prototype at my bench. Testing would use an oscilloscope, logic analyzer, bench supply and current profiler to check reliable booting, programming, current draw and sensor integrity. I would log range and packet delivery during concurrent Wi-Fi/Bluetooth operation, agreeing on distance, traffic and test duration for the zero-loss criterion. My timeline is days 1–3 for the block diagram, BOM and schematic; 4–6 for layout and simulations; 7–11 for assembly and testing; and 12–14 for the report, final Altium files, Gerbers, pick-and-place data, assembly drawings, simulation screenshots and raw data. This assumes expedited PCB delivery and available components. My $250 bid covers engineering; fabrication, parts and shipping are additional. Which sensors, board dimensions and radio test distances do you require? Please contact me to discuss details.
$250 USD in 14 days
7.7
7.7

Hello, ESP32 and IoT development are core capabilities of our multidisciplinary engineering team, making us well suited to build and validate your wireless sensor-monitoring PCB. We combine embedded systems, Arduino/ESP32 development, sensor integration, circuit design, PCB layout, and electrical engineering experience to address the complete path from documented schematic through prototype testing. We can deliver the block diagram, BOM, draft and final Altium design files, Gerbers, pick-and-place data, assembly drawings, and simulation evidence. Our embedded and signal-processing background supports careful attention to the 3.3 V rail, USB-UART programming, sensor integrity, and reliable Wi-Fi/Bluetooth operation. We also work across IoT and smart-monitoring systems, giving us practical context for connected sensor hardware rather than treating the PCB as an isolated design. Live Experts has over a decade of technical delivery experience and hundreds of completed projects. I can provide a clear proposal covering the architecture, simulation and bench-test equipment, and realistic milestones for schematic, layout, prototype validation, and reporting. Choose me for a production-focused ESP32 design with organized documentation and disciplined testing. Thanks!
$1,500 USD in 10 days
7.4
7.4

ESP32 wireless systems, Bluetooth/Wi-Fi electronics, and Altium PCB design are central to my experience, making me well suited to develop and validate your sensor-monitoring board. I have designed ESP32 and ESP8266 embedded systems, RF transmitters and receivers, Bluetooth readers/transmitters, analog circuits, power supplies, DC-DC converters, and SMPS boards. I can produce the block diagram, BOM, documented schematic, and production-ready Altium PCB files, including Gerbers, pick-and-place data, and assembly drawings. My background in analog design, power electronics, embedded systems, and hardware simulation supports careful 3.3 V power-domain design, USB-UART programming, sensor signal integrity, and reliable radio operation. I can use Altium, Orcad, MATLAB, and EasyEDA for design and simulation, then document prototype checks for Wi-Fi/Bluetooth operation, current draw, and sensor-data integrity with screenshots and raw test records. I would be glad to deliver a clear schedule covering schematic, layout, prototype validation, and final reporting, with professional documentation throughout. Select me to turn your ESP32 concept into a thoroughly designed and tested PCB.
$100 USD in 10 days
7.5
7.5

My 8+ years of professional PCB design and embedded-systems experience make me well suited to develop your ESP32 wireless sensor-monitoring board. I design production-ready boards in Altium, Eagle, KiCad, and EasyEDA, with expertise spanning circuit design, PCB layout, embedded systems, Bluetooth, and signal processing—directly matching your dual-radio and sensor-integrity requirements. I can deliver the block diagram, BOM, documented schematics, finalized Altium files, Gerbers, pick-and-place data, assembly drawings, simulation evidence, and structured prototype test documentation. My experience with MATLAB/Simulink, Python, LTspice, PSpice, Multisim, Proteus, and C/C++ supports simulation and embedded validation, while my Electrical/Electronics Engineering background helps ensure careful power, USB-UART, wireless, and sensor design decisions. As a Preferred Freelancer ranked among the top 1%, I provide organized engineering work focused on manufacturability and reliable testing. Choose me for a complete ESP32 PCB design and validation package, and I will be glad to discuss the project further.
$140 USD in 7 days
7.0
7.0

⭐⭐⭐⭐⭐ I propose developing your ESP32 wireless sensor-monitoring board through a structured design, prototype, and validation workflow, with documented engineering decisions and test results at each stage. Architecture: I’ll select the appropriate ESP32 variant based on Wi-Fi/Bluetooth requirements, integrate the sensor interfaces, design a stable 3.3 V power supply, and include reliable USB-UART programming, boot, and reset circuitry. The PCB will follow RF layout practices for antenna clearance, grounding, decoupling, and noise control. Workflow and deliverables: Requirements review, block diagram, component selection, BOM, and draft schematic. Final Altium schematic and PCB layout, including Gerbers, pick-and-place, and assembly drawings. Power-integrity and applicable signal-integrity simulations, with screenshots and raw results. Prototype testing covering startup stability, programming, current draw, sensor-data integrity, and Wi-Fi/Bluetooth performance. Final report documenting equipment, test conditions, measurements, issues, and results. Please share the intended sensors, power-source details, enclosure constraints, and preferred ESP32 module. Prototype assembly and equipment availability can then be confirmed against the required test scope.
$140 USD in 7 days
5.8
5.8

Hi, I am an electronics/PCB engineer experienced with ESP32 hardware, Wi-Fi/Bluetooth RF layout, sensor interfaces, USB-UART programming, power integrity, and production-ready Altium designs. I have developed wireless embedded boards with controlled RF keep-outs, low-noise sensor sections, optimized 3.3 V power distribution, and practical prototype bring-up. Approach: ✅ I will define the ESP32, sensor, USB-UART, 3.3 V power, RF/antenna, and programming architecture, then complete the schematic and BOM in Altium. ✅ I will create the PCB with correct antenna keep-out, grounding, decoupling, return paths, sensor isolation, and DFM rules, then perform signal/power-domain simulation and review. ✅ I will assemble and bring up a prototype using oscilloscope, logic analyzer, current measurement, and Wi-Fi/Bluetooth test tools to verify boot, programming, radio stability, current draw, and sensor integrity. ✅ I will deliver Altium sources, Gerbers, pick-and-place, assembly drawings, simulation results, raw test data, and a concise validation report. Questions: ✅ Which ESP32 variant and sensors are already selected? ✅ What PCB dimensions, antenna type, and expected Wi-Fi/Bluetooth operating range are required? ✅ For the “zero packet loss” criterion, what test duration, distance, packet rate, and RF environment should be used? Best, Yaroslav
$190 USD in 7 days
5.7
5.7

Hello, I can design your ESP32 board in Altium, including schematics, PCB layout, BOM, and manufacturing files. I’ll focus on stable 3.3V power, USB-UART programming, RF performance, and sensor reliability. Timeline: 10–15 working days, including design, simulation, and reporting, with prototype testing subject to hardware availability. Best regards
$140 USD in 7 days
5.6
5.6

Hello, With 15+ years of experience in embedded systems, PCB design, Altium Designer, ESP32, sensor integration, USB, and wireless communication, I can help develop your device from schematic design through PCB layout, firmware integration, and prototype validation. **My proposed approach:** - **Architecture:** ESP32 with Wi-Fi and Bluetooth, carefully designed 3.3 V power supply, sensor interfaces, USB-UART programming, and optimized RF layout. - **Design:** Complete block diagram, BOM, schematics, and production-ready Altium PCB files, including Gerbers, pick-and-place, and assembly drawings. - **Simulation:** Proteus and appropriate circuit-analysis tools for power integrity and relevant circuit checks. RF performance will be evaluated through PCB layout review and physical testing. - **Bench testing:** Oscilloscope, multimeter, USB-UART interface, and Wi-Fi/Bluetooth test equipment or software to evaluate startup reliability, current consumption, connectivity, and sensor-data integrity. I will document test conditions, measurements, and any limitations. Zero packet loss will be treated as a measurable acceptance target under agreed test conditions rather than an unconditional guarantee. I can also provide a production-focused BOM with LCSC/Mouser sourcing options and complete engineering documentation. Best regards, Hamza
$90 USD in 7 days
5.4
5.4

Hello I am an Embedded Electronics Engineer with 10 years of experience, providing ESP32 firmware, power regulation, RF circuit design, KiCad PCB layout, and hardware testing. In my opinion, I would organize the design into modular power, DC regulation, 13.56 MHz RF, and controller boards so each section can be tested and maintained independently. I would evaluate the RF/DC combining network, impedance matching, grounding, and sensing circuits to support simultaneous operation while keeping electrical noise under control. This project is very similar to my previous works. I have experience with embedded systems, power electronics, sensor interfaces, and multilayer PCB design. I would prepare the schematics, production-ready PCB files, annotated BOM, reference firmware, and design documentation, including component availability and test points for easier troubleshooting. Safety is the main priority for this application. I would design independent hardware current and power limits, verify voltage and current measurement accuracy, and implement fault handling and output shutdown. The RF power-control method would be evaluated for stable operation rather than relying on PWM alone without validating its effect on the RF stage. Two important questions: What DC output voltage range is required to achieve the 0–5 mA target across the expected probe resistance? Do you have a defined RF output impedance and waveform requirement at 13.56 MHz? Best regards. Maksym
$140 USD in 7 days
5.0
5.0

HI, I am an experienced electronics and PCB Design engineer, specialised in use of ECAD software such as Altium Designer, KICAD, EasyEDA, etc. for the the design of electronics and PCB. I will design your projects to meet your Requirements and the industry standard. I do all kinds of circuits such as Power delivery circuit, Sensor Integrated Circuits, wireless control, MCUs etc. I will deliver the following. The Schematics for your Design The PCB for the design Bill of materials(If needed) Gerber, Pick and Place and other manufacturing and assembly drawings needed. Full Support and consultancy till the project is done. Kindly send me message for my previous designs and also so we can discuss further on your project I look Forward to working with you. Best Regards, Abdur-Rafiq
$200 USD in 7 days
5.3
5.3

My 4+ years designing custom electronics, embedded systems, PCB layouts, and hardware prototypes directly match your ESP32 wireless sensor-monitoring device. I can develop the block diagram, BOM, documented schematics, and production-ready Altium PCB files, including Gerbers, pick-and-place data, and assembly drawings. My background in embedded system design and proof-of-concept prototyping supports the complete hardware path from concept through a working board. I can focus on reliable 3.3 V power delivery, USB-UART programming, ESP32 Wi-Fi/Bluetooth integration, sensor interfaces, and clear documentation of simulation and prototype results. My electrical and electronics design experience also aligns with reviewing signal integrity, power domains, current draw, radio behavior, and sensor-data integrity through bench testing and detailed logs. I am ready to apply my PCB layout, circuit design, and embedded systems expertise to deliver a thoroughly documented ESP32 board and test report. Choose me to discuss and execute this project professionally.
$140 USD in 5 days
5.1
5.1

My strongest match for your project is my expertise in Altium Designer, PCB Layout, Circuit Design, Electrical Engineering, and Electronics—directly aligned with the schematic capture and production-ready board files you require for an ESP32 sensor device. I can prepare the block diagram, BOM, draft and final schematics, PCB artwork, Gerbers, pick-and-place data, and assembly drawings in Altium Designer. My circuit-design and electronics background supports careful power-rail and connectivity decisions, while my engineering experience and technical drawing skills help keep the documentation clear and suitable for manufacturing. I will keep the deliverables organized around your 3.3 V boot requirement, USB-UART programming, dual-radio operation, and sensor-data integrity. I can also provide structured simulation outputs and bench-test documentation for the completed design where the required hardware and test setup are available. I am ready to contribute as your Altium PCB designer and electronics engineer, delivering professional design files and clear technical documentation for review and fabrication.
$120 USD in 2 days
4.9
4.9

✅✅✅✅✅ I can develop your ESP32 sensor-monitoring board from architecture and schematic through PCB layout, prototype validation, and a documented test report. Proposed architecture I would select an ESP32 module supporting simultaneous Wi-Fi and Bluetooth, design a robust 3.3 V power domain, and include USB-UART programming, sensor interfaces, reset/boot circuitry, and appropriate protection. The PCB layout will prioritize antenna clearance, grounding, decoupling, and separation of noisy power circuitry from sensitive sensor signals. Tools and validation I propose using Altium Designer for schematic capture, PCB layout, and design-rule checks; circuit simulation tools for applicable power and signal analyses; and an oscilloscope, multimeter, bench power supply, USB-UART interface, and wireless test firmware for bench validation. I will record supply behavior, current consumption, connection stability, RSSI/range, packet counts, and sensor-data integrity. Deliverables will include editable Altium source files, Gerbers, BOM, pick-and-place data, assembly drawings, applicable simulation results, raw test logs, and the final validation report. Please share the sensor list, intended operating range, power-source details, and preferred ESP32 variant so I can confirm the architecture and provide a fixed-price quote.
$140 USD in 7 days
4.4
4.4

Hi, This is exactly the type of project I work on as a Hardware Engineer, specializing in ESP32-based designs, embedded hardware, and PCB development using Altium Designer. I can handle the schematic design, component selection, PCB layout, and manufacturing files, with careful attention to power integrity and reliable Wi-Fi and Bluetooth operation. You can check my portfolio for examples of my previous ESP32 and PCB projects. Best regards, Ahmed
$140 USD in 7 days
4.6
4.6

Hi there, I noticed you need thorough simulations and testing for the ESP32 PCB setup. For your project, I plan to utilize Altium Designer for the schematic and layout, ensuring clear documentation and a robust BOM. I'll employ simulation software to assess both signal integrity and power domains before moving to prototype assembly. I can provide the complete deliverables, including the block diagram, final PCB files, and a comprehensive test report confirming Wi-Fi and Bluetooth functionalities, current draw, and sensor data accuracy. Could you clarify any specific testing equipment you prefer or have in mind? Looking forward to discussing further details and aligning on the project's scope. Regards, Ali
$90 USD in 1 day
3.9
3.9

Hi, I've read your project, and it's a good fit for me. I design ESP32 boards in Altium and test them on my own bench. The main problem to solve: making the ESP32 run Wi-Fi and Bluetooth together reliably. Both share one 2.4 GHz radio, and Wi-Fi transmit pulls about 500 mA in bursts. If the 3.3 V rail or the antenna layout is weak, you get brownout resets, failed boots and dropped packets. Most ESP32 board problems start here, so power and RF layout are where I put the most care. My approach: ESP32-S3-WROOM module: pre-certified, RF already tuned, and native USB for programming Power: a 3.3 V regulator rated for at least 600 mA, with proper bulk and decoupling capacitors Layout: antenna keep-out at the board edge, solid ground plane, clean sensor routing Simulation: signal integrity and PDN analysis in Altium Timeline: Days 1: block diagram, BOM, draft schematic Days 2: final schematic and PCB layout Days 3: simulations, Gerbers, PCB order Days 4: assembly and bring-up Days 5: full test report Price: $100-150 fixed + PCB and parts at cost Quick question: which sensors will the board use? Best, Steven
$100 USD in 1 day
3.9
3.9

Greetings Dear Hiring Manager I can design an Altium ESP32 sensor PCB with optimized power domains and reliable Wi-Fi and Bluetooth operation 1. Which ESP32 variant and sensors are required? 2. What are the board dimensions and layer limits? 3. Which power source and peak current are expected? 4. What simulation tools do you require? 5. Which Wi-Fi and Bluetooth range targets must be met? I am waiting in chat to discuss your project in more detail Best Regards Dr Kainat
$31 USD in 3 days
3.5
3.5

I have 13 years of experience in technical engineering workflows, electronics-related projects, automation, and structured testing. I can help develop your ESP32 wireless sensor-monitoring device, from system architecture and schematics through PCB layout, simulation planning, and validation documentation. I would start with a block diagram, sensor and power requirements, and selection of the appropriate ESP32 module. Next, I’d develop the Altium schematic, PCB layout, BOM, and manufacturing files, paying close attention to RF antenna clearance, grounding, decoupling, USB-UART programming, and power integrity. For validation, I’d plan power-domain and signal-integrity checks, followed by bench testing using a multimeter, oscilloscope, programmable supply, and Wi-Fi/Bluetooth test utilities. The report would document current consumption, wireless range, sensor accuracy, and packet-loss results under defined conditions. I can work on a short turnaround, with an estimated 3–5 weeks depending on PCB complexity and prototype availability. I would confirm hardware access and testing capabilities before committing to physical prototype results. I won’t fabricate simulation data or test logs, and zero packet loss would need to be demonstrated under specified test conditions. My pricing is flexible and open to discussion based on the final scope.
$30 USD in 1 day
3.7
3.7

Hello, I’m an experienced Hardware Engineer specializing in ESP32-based IoT devices, Altium Designer, sensor interfaces, and power management. I can develop a well-documented schematic and production-ready PCB with optimized RF layout, stable 3.3V power, and reliable sensor interfaces for simultaneous Wi-Fi and Bluetooth operation. Deliverables include the block diagram, BOM, Altium project, Gerber, CPL, assembly drawings, and available simulation and prototype test reports. I’ll validate power stability, USB-UART programming, current consumption, wireless performance, and sensor data integrity using appropriate simulation tools and bench equipment, including an oscilloscope, multimeter, and power supply. Packet-loss results will be documented under defined test conditions. Best regards
$140 USD in 7 days
3.8
3.8

Brooklyn, United States
Payment method verified
Member since Sep 12, 2026
₹12500-37500 INR
₹1500-12500 INR
$30-250 USD
₹600-1500 INR
£150-350 GBP
$50-125 USD
₹1500-12500 INR
₹1500-12500 INR
$30-250 USD
$250-750 USD
$10-30 USD
₹600-1500 INR
₹12500-37500 INR
₹1500-12500 INR
₹1500-12500 INR
$30-250 USD
₹1500-12500 INR
$250-750 USD
₹1500-12500 INR
₹1500-12500 INR