Structural engineering / Townhouse Timber Frame & Roof

@beingmrme

HI, I can deliver complete structural engineering support for your townhouse timber frame and roof project, including load analysis, member sizing, code-compliant calculations, framing details, and coordinated drawings ready for construction and permit review. Timber-frame townhouse structural design projects commonly require detailed roof and framing calculations, code compliance, and construction-ready documentation. 1️⃣ Which Australian state and building code requirements apply to the project? 2️⃣ Do you already have architectural plans and timber framing layouts available? 3️⃣ Are stamped engineering drawings and calculations required for council approval? Warm regards, The Blend Nation.

@anthonym873

Hi, This is exactly the type of project where early coordination is critical. Since the slab engineering has already been completed, the timber framing and roof design need to be developed around the existing structural constraints while maintaining efficient load paths, minimizing structural steel, and ensuring full compliance with the applicable Australian Standards. I can review the architectural package and slab engineering, then develop a coordinated HyJOIST framing solution including member sizing, connection schedules, roof framing layout, tie-down requirements, bracing design, and Colorbond roof support details. My focus is always on producing practical framing documentation that integrates cleanly with approval and construction workflows. I understand that a draft submission is required before finalization, and I am comfortable providing staged deliverables for review and coordination before issuing the completed drawing set. A couple of quick questions before we proceed: Have the site wind classification and terrain category already been established, or should they be determined as part of the roof design process? Will the roof structure utilize prefabricated trusses, conventionally framed rafters, or are you open to recommendations based on spans and cost efficiency? Portfolio: https://www.freelancer.com/u/anthonym873 Feel free to share the architectural drawings and slab engineering package, and I can review the framing feasibility immediately. Let’s discuss your project now!

@sajjadkhanemon

Hello there, This is Sajjad Khan. I am an Architect with more than 6 years of experience in my field in Design and Visualization, MEP, Structural etc. I am experienced in Revit, Rhino, Twinmotion, 3ds Max, AutoCAD, SketchUp, Lumion, D5 Render and Blender as well. I have recent experience in similar projects also. It’s an interesting project and I am really excited to start working on it. Please Get in Touch with me for further discussion on the project.. Thanks Sajjad Khan

@manusharma2992

Drawing from my extensive experience and proficiency in Structural and Architectural Engineering, I understand the gravity of this project’s specifications and requirements. My solid command of AS Standards, paired with my meticulousness in adherence, ensure that what I'll deliver is a product perfectly aligned with those standards. Having worked on complex projects like yours all across the Australian market, I've become intimately familiar with the compliance regulations that must be observed, providing you assurance that your townhouses will meet all relevant safety measures.

@lamvanduong

How are you? Your project matches well with my skills. Please check my profile. https://www.freelancer.com/u/lamvanduong I'll provide all drawing sets and wonderful result such as PDF, DWG(2D drawings), rendering images and BIM(3D model). I have many experience in Architectural BIM modeling, MEP design, structural design, civil engineering and drawing by using revit, Archicad, Chief architect, sketchup and cad , etc. I'll use your country building code to permit. Let's discuss more project and start together. Best regards

@gzarali

As a seasoned structural and civil engineer with over 14 years of experience, I fully understand and appreciate the complexity and specificity required for your project. My familiarity with Australian Standards (AS 1684, AS 1720, AS 1562.1) and comprehension of companion codes such as AS 4055 and AS 1170.2 ensure that every single detail, from the selection of materials like Hyjoist to Roofing in Colorbond metal sheeting, will be precisely calculated in line with industry-specific requirements. During my career, I've developed a reputation for delivering high-quality work that is both pragmatic and compliant. I achieve this by constructing drawings that fabricators can apply directly, providing organized and easily integrated files for drawing cohesion. This approach minimizes costly discrepancies or delays during construction. Be assured; my focus is on crafting buildable designs - the same commitment I bring to every project. What sets me apart is my ability to deliver within stringent timescales without compromising the quality or functionality of the resultant design. The progressively iterative nature of my approach allows for dynamic responsiveness throughout the project lifecycle without interrupting the structural system already in place. Pairing this adaptability with my firm grasp on AutoCAD, Revit, Tekla supporting software such as SAP2000,

@subodhkumarv2015

Hi there, I can assist with the structural design and documentation for your five-townhouse development, coordinating the timber framing and roof system with the completed slab engineering and architectural drawings. I have experience preparing detailed structural framing plans, connection details, and construction documentation for timber residential projects using engineered wood products. The design will be developed around HyJOIST floor systems and Colorbond roofing requirements, with careful consideration of load paths, bracing, tie-downs, wind actions, and overall constructability. My approach is to maximize timber efficiency and minimize structural steel wherever practical while ensuring compliance with the relevant Australian Standards. Deliverables can include framing layouts, roof framing plans, connection schedules, structural details, draft review drawings, PDF/DWG documentation, and supporting calculations suitable for approval and construction. I am also happy to coordinate revisions during the draft stage and participate in a handover review once the package is complete. Please share the architectural and slab engineering drawings, and I can review the project requirements and confirm the most efficient framing approach.

@trithucn

Hi there ? I have extensive experience using Revit, Chief architect, Autocad and archicad for architectural and MEP modeling, including creating detailed BIM models, floor plans, and construction documentation. I can ensure your project is accurately modeled with full parametric functionality for easy updates. I can start with an initial model draft for your review. Looking forward to collaborating! Best regards

@InoovativeThink

Hi, I read through your project for Structural engineering / Townhouse Timber Frame & Roof. You need help with structural engineering / townhouse timber frame & roof. I can build and deliver this efficiently based on the job requirements. This fits well with my experience in Architectural Engineering and AutoCAD. I can take what you outlined and turn it into a clean final delivery, with attention to Architectural Engineering and AutoCAD and the details in your brief. I will keep the implementation clean, practical, and aligned with your requested scope. Send me the details and I can start immediately.

@graphicart466

Hello, I am confident in my ability to deliver detailed structural engineering and framing plans for your townhouse project, especially with my expertise in building architecture, AutoCAD, and civil engineering. I will ensure all timber layouts and roof systems are precisely engineered according to the Australian Standards specified (AS 1684, AS 1720, AS 1562.1, AS 4055, and AS 1170.2). My approach includes providing signed structural calculations, coordinated framing plans, and detailed roof layouts suitable for building approval, incorporating manufacturer requirements for Colorbond roofing. With my comprehensive knowledge of building regulations and project management, I will deliver clean, layered drawings ready for Revit or AutoCAD, accompanied by a clear compliance statement. I will also ensure the hand-over process is smooth with a thorough walkthrough via call. Looking forward to collaborating on this project and bringing your vision to life efficiently. Please let me know the next steps or if you have specific reference materials. Could you clarify if there are any specific concerns regarding the structural steel minimalism requirement or the integration with existing slab design? Thanks, Gourav

@bilalh585

Hello, I am interested in assisting with your five-unit attached townhouse timber framing and roof design. I have experience in structural timber engineering for residential and multi-unit developments, including Hyjoist floor systems, timber roof framing, and wind-resisting structural design in compliance with Australian Standards. My approach will be to develop a complete and coordinated structural framing solution that integrates with your existing slab design while minimising the use of structural steel. I will carefully establish load paths, member sizing, spacing, and connection detailing for floors and roofs, ensuring the system is both structurally efficient and constructible on site. For the floor system, I will design and detail Hyjoist members in accordance with AS 1684 and AS 1720, including joist layouts, beam sizing, and connection requirements. For the roof system, I will design truss or rafter layouts suitable for Colorbond metal sheeting, including battens, bracing, tie-downs, and uplift resistance based on AS 4055 and AS 1170.2 wind actions, while also considering manufacturer requirements for the selected roofing

@salahuddin1973

Hello I can engineer the structural timber framing and roof system for your five attached townhouses, fully aligned with Australian Standards including AS 1684, AS 1720, AS 1562.1, AS 4055, and AS 1170.2, and coordinated with your existing slab and architectural design. My focus will be on a Hyjoist-optimized floor system, ensuring correct member sizing, spacing, load paths, and connection detailing while minimizing structural steel as requested. I will also develop a Colorbond roof framing solution with compliant battens, bracing, tie-downs, overhang design, and wind-resisting details suitable for approval. All drawings will be structured for clean integration into AutoCAD/Revit workflows, with clear layering and construction-ready documentation. Before I proceed, could you confirm the site wind classification (if already determined under AS 4055) so I can align roof and tie-down design accurately from the outset? Best regards, Naufal

@GridsmithLTD

Hello, I've reviewed your project and understand you're looking for a fully coordinated timber framing and roof design package for five attached townhouses, ensuring the Hyjoist floor system, roof structure, and tie down strategy integrate correctly with the completed slab design while complying with the relevant Australian Standards. I can develop detailed framing layouts, connection schedules, roof member sizing, and construction documentation with a focus on efficient timber design, minimal structural steel usage, and clear coordination between the architectural, slab, and structural elements. Could you share the architectural drawings and completed slab engineering so the framing strategy can be assessed against the existing design constraints? Regards, Atik

@reyanng

Hi. I have wrapped up a similar project with an Australian residential structural package that engineered multi-residential timber frames, specified Hyjoist floor layouts, optimized Colorbond wind-bracing designs under AS 1684/AS 1170.2, and delivered certified, compliant building approval documentation. We can do this. Can start right away!

@crauch66

Hello, I hope you are doing well. As an experienced professional with a strong background in structural engineering, I'm confident that I can be your go-to person for this timber frame and roof project. My knowledge of the relevant Australian Standards and companion codes (AS 1684, AS 1720, AS 1562.1), coupled with proficiency in AutoCAD, make me well-equipped to deliver accurate, compliant and effective designs tailored to your specific needs. Moreover, given my experience in creating organized and easily integrable construction documentation using architectural drawings, I assure you that the final plans, elevations and connection schedules will seamlessly fit into your existing architectural design. This will ensure a cohesive and efficient construction process with minimal structural steel making it cost-effective. In addition to my technical skills, my commitment to quality and eye for detail make me stand out amongst my peers. I don't just create designs or perform calculations; I create end-to-end solutions that align with your brand, goals and regulations. With me on board, you can rest assured that you'll receive a set of meticulously designed structural plans alongside transparent communication and reliable support at every stage of the project.

@shadabkhan92

As an experienced and licensed structural engineer based in Australia, I'm confident that I possess the skills and expertise necessary to tackle your townhouse project. Unlike many other engineers in the field, I'm not just a specialist in one area; my work centers around cross-boundary projects similar to yours, where intelligent systems need to be developed and actually implemented. This unique experience will enable me to more effectively design your Hyjoist-based project that works hand-in-hand with your existing slab design, ensuring seamless integration with minimal structural steel used. In addition, my proficiency with key Australian Standards such as AS 1684, AS 1720, AS 1562.1, AS 4055 and AS 1170.2 is second nature to me. Moreover, my past involvement in producing building approval packages has sharpened my ability to provide you with clear and detailed documentation for your regulatory requirements. Lastly, I'm well-versed in Revit and AutoCAD which facilitates tidy layering of my drawings for easy use and integration into your preferred program. Having said all that, what sets me apart is my commitment to delivering beyond just signed calculations; from coordinated framing plans to a thorough compliance statement- you can expect nothing short of excellence at every step of this project. Let's connect and discuss how we can make a success out

@Saimaqaisar643

Dear Client, I can support you in preparing well-structured structural documentation, coordinating timber framing layouts, and organizing design details into clear, approval-ready drawings for your townhouse project. I'm Saima Qaisar with 5+ years of experience in drafting, design documentation, and technical layout preparation. I can carefully translate architectural and engineering inputs into clean, organized framing plans, schedules, and supporting documents that align with Australian construction standards. For compliance and final structural sign-off, a licensed Australian structural engineer will be required, and I can work alongside your engineer to ensure all Hyjoist, roof, and load requirements are accurately reflected in the drawings and documentation. I am ready to start once you share the architectural and slab details. Best Regards

@SkillCrafts

I understand you need a licensed Australian structural engineer to provide detailed timber frame and roof design for five attached townhouses, specifically incorporating Hyjoist members and Colorbond roofing. My experience with similar multi-residential timber construction projects, where I've meticulously detailed beam sizing, joist spacing, and connection specifics to meet project requirements and Australian Standards, directly aligns with your needs. My approach will involve a thorough review of your architectural plans and the Hyjoist product specifications. I will perform all necessary load calculations, structural analysis, and design checks in accordance with AS 1684, AS 1720, AS 1562.1, and relevant companion codes. This will include precise sizing and spacing of Hyjoist beams and joists, detailing all critical connections, and designing the roof structure with appropriate battens, tie-downs, and bracing to accommodate Colorbond sheeting and overhangs, ensuring compliance and structural integrity. To best tailor my services, could you clarify the specific site wind classification and any particular soil conditions that might influence the substructure design? I'm confident I can deliver accurate, compliant, and efficient structural documentation. I'm available to discuss your project further at your convenience.

@josei21

Hi, I'm a structural engineer with exp in timber framing, Hyjoist systems, and Australian Standards including AS1684, AS1170 & AS4055. I can provide the structural calcs, framing plans, roof layouts, tie-down schedules, and permit-ready drawings coordinated with your slab design. Minimal steel and integration with the existing slab can definitely be achieved with proper framing optimization. Could you share the architectural set and slab engineering so I can review feasibility and provide timeframe? Lets connect