Convert NT8 DLL to CS

@Herculesz

Hi, — this is a reconstruction and parity-testing problem more than a simple code conversion, and that distinction matters if you want tick-for-tick alignment in NinjaTrader 8. The real engineering risk is hidden state: plot dependencies, bar update timing, and any implicit handling inside the compiled indicator that can shift signals by a bar or alter alert timing. I usually structure this kind of work as behavior capture first, then deterministic rewrite, then side-by-side validation. The closest work in my background is NYSE Day Trading Bot Development, where signal logic and market-timing behavior had to be implemented precisely, and Custom Feature Development & Integration, which involved stepping into existing systems, analyzing current behavior, and handing back maintainable code. For this job, I’d separate the effort into three layers: inspect the DLL-facing behavior, map the signal and plot dependency flow, and then rebuild the NinjaScript with clean comments and no external dependencies. Where the original behavior is ambiguous, I’d isolate those sections and document the interpretation clearly. I approach systems like this with output-diff validation against the original: timestamps, displayed values, crossover events, and alert conditions, not just visual similarity. If useful, I can first sketch the validation approach I’d use to confirm parity before the rewrite begins. Thanks, Hercules

@sdqtrades

As a seasoned algorithm and software engineer, who specializes in trading scripts and bots, I am confident I can seamlessly convert your NT8 DLL to CS. Over the years I've garnered extensive experience developing algorithms, primarily on NinjaTrader platforms like the one you have described. My aim is always to not only deliver clean and optimized code but also to enable my clients to enhance and study it as needed. An essential part of ensuring a seamless transition from a compiled file to an open-source .cs script is being able to understand the original logic completely - this includes slope and crossover logic, as well as reading plots from other indicators. My expertise lies in quickly grasping complex code structures and replicating them accurately with clear, concise comments - which are valuable resources for future references. Timeliness, quality, and confidentiality are values I hold dear in my project execution. You can trust that your ideas will remain confidential - I'm more than happy to sign an NDA for you. Additionally, I understand the importance of owning full intellectual property rights to one's code, so this extends to you having complete ownership of the software and source code upon completion. Let's work together seamlessly to transform your locked DLL into an open-source NinjaScript that meets your exact specifications.

@ZohaibRoy

⭐⭐⭐⭐⭐ Create NinjaTrader 8 Indicator from Compiled .dll File ❇️ Hi My Friend, I hope you're doing well. I've reviewed your project requirements and see you're looking for a NinjaTrader 8 indicator to be created from a .dll file. Look no further; Zohaib is here to help you! My team has successfully completed 50+ similar projects for NinjaScript indicators. I will extract the logic from your .dll file and rewrite it into a clean, well-commented .cs file, ensuring it compiles without errors and delivers identical functionality and visual output. ➡️ Why Me? I can easily create your NinjaTrader 8 indicator as I have 5 years of experience in NinjaScript development, specializing in indicator creation, logic extraction, and code refactoring. My expertise includes C#, algorithm development, and thorough testing. Additionally, I have a strong grip on other relevant technologies, ensuring a seamless integration into your project. ➡️ Let's have a quick chat to discuss your project in detail and let me show you samples of my previous work. I look forward to discussing this with you in our chat. ➡️ Skills & Experience: ✅ NinjaTrader 8 Development ✅ C# Programming ✅ Indicator Creation ✅ Logic Extraction ✅ Code Refactoring ✅ Debugging ✅ Algorithm Development ✅ Charting Techniques ✅ Signal Generation ✅ Performance Optimization ✅ Testing & Validation ✅ Documentation Waiting for your response! Best Regards, Zohaib

@ducthodg

Hi,I can help with this NinjaTrader 8 indicator conversion, provided that you own the DLL or have the right to modify/rebuild it. I have experience working with NinjaScript / NT8 indicators, including crossover logic, slope-based signals, custom plots, alerts, Draw objects, multi-indicator references, and matching indicator output bar-by-bar against an existing version. For this task, my approach would be: 1. Review the existing DLL behaviour and any accompanying files/settings. 2. Load the original indicator on default test data and document its plots, signals, alerts, parameters, and visual output. 3. Rebuild the logic into a clean NinjaTrader 8 .cs indicator. 4. Match the slope, crossover, external plot-reading logic, signal timestamps, and alert behaviour as closely as possible. 5. Test the new .cs file side-by-side with the original DLL until the values and chart signals align. 6. Deliver a clean, commented .cs file plus a short note explaining what was rebuilt or interpreted. Rate: $10/hour Estimated total: around 10–20 hours, approximately $100–$200 depending on the DLL complexity and how many external indicator plots it reads. I can start with the first hour immediately to inspect the indicator behaviour and confirm the rebuild path before continuing with the full conversion.

@mohjib092

Already knows and will be done 100% with the documentation I can analyze the compiled NinjaTrader 8 indicator, replicate its buy/sell signal logic, crossover calculations, plot handling, and alerts into a clean, fully editable NinjaScript (.cs) file that matches the original behavior as closely as possible and compiles on the latest NT8 version. Best Regards

@intelliresponse

As a seasoned software developer with over 13 years of experiencing in crafting custom-made solutions, I'd be a perfect fit for your project. Not only am I well-versed in multiple languages, including C#, Python, and others, but I'm also experienced in low-level programming tasks like converting DLLs into open-source files. My expertise in algorithmic trading and indicators, particularly with NinjaTrader 8 (NT8), adds weight to my proficiency in handling this job. One of my recent projects involved translating complex algorithms into well-commented, clean-coded scripts that provided the same functionality as their original proprietary versions. This experience directly parallels your requirements. Furthermore, my work in web scraping and automation, where accuracy plays a crucial role, aligns with your emphasis on producing identical results. In addition to the above, my proficiency extends to diverse areas such as smart contract development, blockchain integration, Full-stack development and creating trading bots. This breadth of knowledge enables me to appreciate the overall context of your project – beyond just recreating the DLL logic – and ensure that the final .cs file has no external dependencies while delivering on every aspect you require. Contact me today for an impeccably worked-on code for your project that guarantees line-to-line resemblance in every timestamp, signal and display value!

@mido9696

Hello, I am ready to convert your dll files to a clean open-source .cs files It's my passion and I like to do those projects Please contact me to discuss more I am waiting you, Thanks

@talkwaqar

Two details stood out: the signals are driven by slope and crossover logic, and the indicator also reads plots from other indicators, which is the part most rewrites get wrong. Your real test is tick-for-tick parity, not just "it compiles," so I'd treat the cross-indicator plot reads as the highest-risk piece from day one. Here's how I'd approach it: 1. Decompile the .dll and map the OnBarUpdate flow, the slope/crossover math, and every external plot it pulls in. 2. Rewrite it as one clean, commented NinjaScript .cs with no external dependencies, matching plot names and signal conditions exactly. 3. Run it side-by-side with your .dll on the default test data and reconcile any drift until timestamps, signals, and values line up. I work daily in C# and have done reverse-engineering and behavior-matching refactors where the bar is "identical output," not "close enough," which is the same standard you're validating against. Done = the new .cs loads in the current NT8 release with no errors and produces the same signals and displayed values as the original on your test data, plus a short note on anything I had to interpret. Quick question so I scope correctly: is the .dll obfuscated, and do you have the source for the other indicators it reads from, or only the compiled outputs on the chart? Waqar

@mdabdullahallm5

I will reverse-engineer and recreate your NinjaTrader 8 indicator from the compiled .dll into a clean, fully open-source NinjaScript (.cs) file with identical behavior, signals, and visual output. Using careful analysis and testing, I’ll ensure tick-for-tick alignment with the original, including slope, crossover logic, and any referenced indicator data. The final code will be well-commented, compile without dependencies, and include notes on any inferred or refactored logic for full transparency and future extensibility.

@markupdudes

Hello, I understand your need to convert a compiled NinjaTrader 8 DLL into a fully accessible, clean, and well-documented .cs script for study and extension. With extensive experience in C# programming and NinjaTrader development, I am confident in replicating the exact buy/sell signals and indicator plots to match your existing tool perfectly. I will ensure the new source compiles without errors and delivers identical chart visuals and alerts, accompanied by clear commentary on any refactored or interpreted code parts. I propose to start immediately and deliver the script promptly for your validation. Could you specify if there are any additional custom indicators integrated with this DLL that I should be aware of during the rewrite? Thanks,

@durgesh8527

As a seasoned full-stack development team boasting an impressive 12+ years in the industry, we bring an advanced set of skills to your table. Our strong command over web and software engineering in general, along with specific know-how in NinjaTrader 8 platform, makes us proficient in Java and C#. We fully understand the unique demands of working with proprietary data structures such as DLLs, and more than competent for the extraction and refactoring tasks as required by you. In line with your project's needs, I assure you of meticulous attention to detail; rewriting or extracting the logic precisely while ensuring that the functionality and visual outputs align perfectly. Our commitment to producing clean code is matched by our thorough documentation practices. We will provide you with a well-commented, self-sufficient .cs file—free from any external dependencies.

@swadhinr

I will convert your locked .dll indicator into a fully transparent NinjaTrader 8 script by carefully replicating its slope, crossover, and multi-indicator logic. The result will be a dependency-free .cs file that compiles flawlessly and produces identical outputs on all test data. I’ll ensure accuracy through detailed comparison testing and provide notes explaining any assumptions made during reconstruction.

@Algokage

Hello, I can deliver the NinjaTrader 8 indicator conversion efficiently, ensuring the .cs file matches the original .dll's behavior and functionality. I'll provide a clean, well-commented script, free of external dependencies, that compiles without errors and produces identical chart output and alerts. My 5+ years of experience in software development and NinjaTrader expertise will ensure a seamless process. I'm ready to begin and look forward to discussing further. Please send a message to get samples or a quick demo, or to discuss specific requirements. Thanks, Adegoke. M

@johnc914

1. Do you own the DLL or have written authorization to reverse-engineer it? 2. Can you provide sample charts, settings, alerts, and dependent indicator plots for comparison? I can perform a clean-room C# rewrite based on observed inputs and outputs, then compare both versions side-by-side in NinjaTrader 8. The main risks are hidden dependencies, intrabar calculation differences, inaccessible parameters, and proprietary licensing protections. I would begin with one signal path as a validation milestone before reproducing the complete indicator.

@trm66614

I will convert your NT8 DLL logic into a clean NinjaScript (.cs) that compiles in the current NT8 release and reproduces the same chart output and alerts. With strengths in Software Development, Debugging, and Technical Documentation, I will provide thorough inline comments to help you study and extend the code later. Deliverables: a single .cs file with no external dependencies, plus a brief notes section describing interpretation decisions or refactoring. The solution will be validated by side-by-side comparison on default data to ensure tick-for-tick parity of timestamps, signals, and displayed values. I will preserve the slope and crossover logic and the indicator reads from other indicators. I will structure the code for readability and maintainability and include a short note explaining decisions. Could you share any NT8 version constraints, data feed configurations, or edge cases I should preserve to ensure exact tick-for-tick parity with the original .dll? Questions for you to refine scope: - What NT8 version and build are you targeting? - Are there any edge cases or data feeds I should preserve to guarantee tick-level parity? - Do you have preferred naming conventions for the NinjaScript indicators or a specific project structure?

@craigd43

As someone with extensive experience in C# programming and a solid background in working with NinjaTrader, I am well-equipped to tackle your project. I understand the importance of maintaining the same functionality and visual output as the original .dll file, and I guarantee that my converted .cs file will not only compile without errors, it will also mirror the original indicator's performance on default test data. Having been involved in full-stack web development and web scraping, efficient code-writing is one of my core strengths. I can ensure that the extracted or rewritten logic from your .dll file is clean, well-commented, and easy for you to study and extend. My approach is always user-focused; so, you can expect the resulting code to be intuitive and organized, making future modifications seamless for you. Furthermore, I am dedicated to delivering high-quality code within agreed-upon timelines. Given that we are dealing with financial market indicators, I recognize how crucial it is for your study purposes that all timestamps, signals, and displayed values line up exactly between the original and new scripts. Trust me to validate this meticulously before handing over the completed project. Choose me for a smooth conversion process tailored to your needs!

@mojjammil

Hello I have experience with NinjaTrader 8 indicators, custom NinjaScript development, and reverse-engineering existing trading tools. I can analyze the provided DLL, reproduce the indicator logic in a clean .cs implementation, and ensure the output matches the original signals, plots, and alerts. The final script will be well-documented, dependency-free, and fully compatible with the latest NT8 release. Regards Mo

@ziedb4

Hello, I work with NinjaTrader 8 and have experience reverse-engineering compiled indicators and rewriting them in clean NinjaScript C#. For this project I'd decompile the .dll using ILSpy, reconstruct the slope and crossover logic, and rewrite it as a native .cs file that compiles cleanly in the current NT8 release with no external dependencies. Visual output and alert behaviour will match tick-for-tick against the original on your test data. Deliverables: one clean, well-commented .cs file + a brief note on any sections that required interpretation or refactoring. Timeline: 3–5 days from receiving the .dll.

@nemanjam61

Hello, Reverse-engineering a compiled .dll into readable NinjaScript is mostly about reconstructing the slope and crossover logic cleanly - the tricky part is when the indicator reads plots from other indicators, since those references need to be wired up correctly in the .cs or the signals diverge on edge bars. I would decompile the .dll, rewrite the logic into a clean well-commented .cs file, and validate it side-by-side against the original until timestamps and signals match tick-for-tick on your test data. Does the indicator reference other built-in NT8 indicators or custom ones you also have access to? Happy to take a look at this. I can start right away.