2-Up Box Print Layout

@pixelonik

Hi there! I am interested in your project for the 2-Up Box Print Layout. I understand that you need the existing box artwork stepped to 2-up on the sheet and prepared for plate making without any design modifications. My proposed steps include accurately aligning the existing design twice, applying the pre-defined crop marks and bleeds, and exporting a job-ready PDF as per your specifications. Please find my portfolio here: https://www.freelancer.in/u/pixelonik I suggest a follow-up discussion to further understand your requirements and ensure a quick turnaround. Best regards, Ramandeep

@aimdesin9339

Hi there, Step-and-repeat for plate making is a precision job — misaligned crop marks or an incorrectly applied bleed at this stage means the plate maker either rejects the file or, worse, produces a run of misregistered cuts. I'll place your single-up artwork twice, align both instances exactly, apply your crop marks and bleed spec precisely, convert all fonts to curves, verify CMYK throughout, and export a clean plate-ready PDF. I'll include a confirmation note with the sheet size and final trim dimensions used. One thing I'll double-check before export: that crop marks for each-up are independent and don't overlap or conflict where the two instances meet at the gutter — this is the most common pre-flight failure point on 2-up imposed files and the one thing that reliably causes plate maker rejections. I work in both CorelDRAW and Illustrator so no conversion issues on my end. Send over the CDR file and your crop mark and bleed spec and I can turn this around within a few hours. Warm regards, Ansar

@Rajoriadares

Hello Client, Greeting of the day!!!! I read your job description. I can do this job with quality product. I am always available for your support. Thanks

@jagjeetsinghram8

Hi, I’m Jagjeet — with 10+ years of experience in print production and prepress file preparation. I can quickly step your existing CorelDRAW artwork to a precise 2-up layout, apply the supplied crop marks and bleeds, and deliver a clean plate-ready PDF for production. What I’ll deliver: • 2-up print-ready PDF setup • Accurate alignment and positioning • CMYK color preservation • Fonts converted to curves/outlines • Proper bleed and crop mark application • Pre-flight checked export for plate making • Confirmation of final sheet and trim size I focus on fast, accurate prepress preparation that ensures clean output and trouble-free plate production. Estimated turnaround: within a few hours depending on file readiness. Ready to start immediately. Best regards, Jagjeet Singh

@NKCREATIONS111

Hi, Your job is straightforward and exactly the kind of production setup work I handle regularly. Since the artwork is already finalized, I can quickly step the existing single-up CorelDRAW file into a precise 2-up layout and prepare it fully for plate making without altering the design. I have 8+ year experience and have specialty in print-ready packaging and box design production files I CorelDraw. Process: • Import and verify the existing CorelDRAW artwork • Step the design accurately to 2-up as per sheet requirement • Apply your supplied crop marks, bleed, and spacing settings • Convert all fonts to curves/outlines and preserve CMYK values • Export a clean, press-ready PDF for direct plate output • Provide final sheet size + trim dimension confirmation Deliverables: • Print-ready 2-up PDF • CMYK-safe output with outlined fonts • Proper bleeds and crop marks applied • Final production dimension note I work natively in CorelDRAW, so there will be no compatibility issues or conversion risks. Fast turnaround is absolutely possible — once you share the file and specs, I can start immediately and deliver quickly. Portfolio: https://www.freelancer.com/u/NKCREATIONS111 feel free to message me so we can discuss.

@DBVertexZone

Hello! Greeting of the day, I can provide you professional and attractive DESIGN with unlimited revisions in less time that will be the true identity of your bussiness. I have over 5+ years experience dealing with different kinds of Graphics and Packaging. Here's my portfolio link for consideration -: https://www.freelancer.com/u/DBVertexZone Thanks & Regards, Devendra.

@mubasharkhalid37

Hi there! Thanks for sharing your project. I’ve reviewed your brief carefully and I can handle this work perfectly. I work with: Adobe Illustrator, Adobe Photoshop & CorelDRAW ensuring clean, high-quality, print-ready and digital-ready designs. Why Choose Me • Fast delivery • 100% accuracy & professional quality • Unlimited revisions until satisfaction • Clear communication • Final files in all required formats I’m ready to start immediately. Please share further details if needed. You can also visit my portfolio to check previous quality work. https://www.freelancer.com/u/mubasharkhalid37

@waleeds05

Hi! I can help you with stepping your box artwork to 2-up and getting it ready for plate making. It sounds like you need everything to be precise, and no design tweaks are needed, which is perfect. I’ve got solid experience working in CorelDRAW, and I can quickly set up the layout with your crop marks and bleeds just like you’ve specified. I’ll make sure the colors stay in CMYK and fonts are converted to outlines, so you won’t have any surprises at output. I can get that print-ready PDF to you in just 1 day. Once it’s done, I’ll include a brief note with the sheet size and final trim dimensions. Does that work for you? Best regards, Walled Saleem

@Videoeditior

Hi There, Thanks for posting project. I read your job description that you are looking Graphics Designer for this project ( Graphics ).I have done this field and good command on Logo, Label, Characters, Packaging, Banner, Brochure, Poster, Flyer, Box, T-Shirt Design. I am sure and confident to provide you the best Design So, let's start working together. PLease visit our portfolio here- https://www.freelancer.in/u/Videoeditior I can start work immediately once you confirm me and i am always ready for further discussion if you want. Thank you. Akshay

@tahar777lamm

Hello, I have carefully read your project description regarding the final box cover design in a single-page CorelDRAW file. From what I understand, you are looking to convert the cover to a two-page design on paper and prepare it for printing, focusing on double-sided placement and precise alignment. I propose completing this project within 20 hours for a cost of 600 Indian Rupees. Thank you for your time and attention, Tahir L

@kaurcreation1

Hi, I’m Simranjeet— with 10+ years of experience in brand identity and print design. I can refine your final logo/vector system and create a clean, professional brand package with consistent visual styling across all assets. What I’ll deliver: • Final logo and vector refinement • Business card production files • Professional letterhead design • Minimalist custom icon system • Print-ready CMYK exports • Brand consistency and visual refinement • Editable source files included I focus on creating polished, modern branding systems that feel professional, cohesive, and production-ready across print and digital use. Ready to start immediately. Best regards, Simranjeet.

@DDSolutions1

Hello, I reviewed your print layout requirement carefully, and this is exactly the kind of production-ready artwork preparation I can handle efficiently. Since the design itself is already finalized, my focus will be on precision, alignment, and making sure the final 2-up print PDF passes pre-flight cleanly for plate making without any output issues. What I’ll do: • Step the existing artwork accurately into a 2-up layout • Apply the exact bleed and crop mark settings you provide • Preserve all CMYK colour values correctly • Convert fonts to curves/outlines to avoid shifting issues • Check spacing, alignment, and trim consistency carefully • Export a clean print-ready PDF suitable for direct plate production I understand that in print production, even small alignment or bleed mistakes can create expensive output problems, so I pay close attention to technical accuracy and final export settings. I can work directly in CorelDRAW or Illustrator depending on your preferred workflow and can deliver very quickly since turnaround is your priority. I’m ready to begin immediately after receiving the source file and specifications. Looking forward to working with you. Best regards, Timothy

@sameedhafsa

​"Hi there! I saw you need a Pro YouTube Thumbnail designer for your [Project Name] project. I specialize in creating high-resolution, cinematic visuals that are designed to stop the scroll and increase CTR. ​I use advanced design tools to produce ultra-realistic imagery tailored specifically to your brand's aesthetic. I’d love to hear more about the '2-Up Box' requirements so I can get started on a draft for you. Looking forward to working together!"

@Ahmad942009

Hi, I can complete this quickly and accurately with full pre-press standards for plate-ready output. I have experience preparing packaging artwork for commercial printing and understand the importance of exact alignment, bleed handling, colour consistency, and clean PDF export for plate making. For this job, I will: • Step your existing single-up artwork into an accurate 2-up layout • Apply your exact crop marks and bleed settings • Preserve all colours in CMYK • Convert all fonts to curves/outlines to avoid output issues • Perform a final pre-flight check before delivery • Export a clean, print-ready PDF ready for the plate maker No unnecessary design changes — only precise production setup and output preparation. I work in both CorelDRAW and Adobe photoshop, so I can use whichever format keeps your artwork safest and most reliable for print production. Deliverables: ✔ Print-ready 2-up PDF ✔ Correct bleed and crop setup ✔ Sheet size and trim dimension confirmation ✔ Fast turnaround and responsive communication I can start immediately and deliver within a few hours after receiving the artwork and specifications. Looking forward to working with you.

@hammadazam786

I can see you have a finished box artwork ready and just need it stepped to 2-up, prepped with crop marks and bleeds, and exported as a print-ready PDF for plate making. No redesign, no guesswork, just clean, accurate execution. I work natively in CorelDRAW and I have handled multiple step-and-repeat jobs for packaging clients. I will place your single-up artwork twice on the sheet with precise alignment, apply your exact bleed and crop mark settings, convert all fonts to curves, and keep all colours in CMYK throughout. The exported PDF will be plate-maker ready and should pass pre-flight without issues. As a bonus, I will also include a simple one-line sheet spec note with the sheet size and final trim dimensions used, so you have it on record when you send the file forward. I can turn this around fast. If you want, just drop the CDR file and your bleed and sheet size specs and I will get started right away. Feel free to message me here if you have any quick questions first. Warm Regards, Hammad Azam

@sushanty520

My Name is Sushant Yadav, and I am a passionate graphic designer and creative entrepreneur. I specialize in graphic designing, branding, advertising, printing, where I help businesses create strong visual identities and impactful promotional designs. I have experience in Creative Designa, logo designs, business branding materials, print designs, and digital products. My goal is to combine creativity with strategy to deliver designs that attract attention and grow businesses. I am dedicated, detail-oriented, and always eager to learn new design trends and technologies. Through my work, I aim to provide creative solutions that leave a lasting impression and help brands stand out in the market.