
Closed
Posted
Paid on delivery
I am building a delay-tolerant networking (DTN) showcase in which city buses and cars behave as “data mules,” ferrying messages from a source vehicle to a destination vehicle whenever communication is possible. The core of the job is a runnable simulation that plays out on an interactive map: I want to watch vehicles move, see packets hop between them, and toggle between two forwarding strategies: • an arbitrary, “send-whenever-in-range” method, and • a direction-aware method that chooses relays based on the vehicle’s heading. While the platform is flexible—Matlab, Python, or any other tool you feel is best—what matters is an intuitive, browser-like visualization where I can zoom, pan, and click a node to inspect its current payload. Once both strategies run across identical mobility traces, I need a concise comparison of • data transfer speed, • number of hops, and • message delivery rate. A final graph or table that places those metrics side by side will finish that portion. Beyond the code, I would value your help drafting the main thesis points: how to explain the simulation model, the forwarding logic, the assumptions, and how the results support the argument. I already have a small prototype and can walk you through it on a quick call so you can reuse or refine parts of it. Deliverables • Executable simulation with interactive map and two selectable forwarding modes • Dataset of recorded runs plus the comparative graph/table (preferred formats: CSV + PNG/PDF) • Brief write-up or slide deck outlining the thesis structure and key findings • Installation/run instructions If any existing mobility libraries, GIS tiles, or animation frameworks make the job easier, feel free to integrate them—just keep the final setup straightforward for reproducibility. Happy to discuss finer points, sample traces, or milestone breakdowns on our first call.
Project ID: 40767299
114 proposals
Remote project
Active 7 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
114 freelancers are bidding on average $449 USD for this job

Hello, I am Dr. Rajesh Rolen, PhD in Computer Science & Engineering, with experience of over 20+ years in Software Architecture, Data Visualization, Python As a preferred freelancer in the top 1%, I have done 400+ projects here on freelancer.com, I have 4.9 ratings out of 5 on average, which showcases my quality of work and timely delivery. Key Highlights: - Free Hosting Support on the Cloud or any desired platform. - Free 3 months of post-delivery support to ensure that our client doesn’t face any challenges after the launch of the project. - Free Dedicated tester on projects to ensure quality delivery, so clients don’t need to act as a tester. - 10+ Years experience UI/UX team to ensure intuitive UI. Portfolio: https://www.freelancer.com/u/Microlent Please open the chat and send me a message, so we can have a more detailed discussion about the project to give you the project timeline and cost. Thank you for considering my services. I look forward to engaging in a productive conversation and understanding how I can be of assistance in bringing your project to life. Regards Rajesh Rolen
$500 USD in 10 days
9.3
9.3

Hi, This is Elias from Miami. I checked your project description and understand you’re looking to develop an interactive delay-tolerant networking (DTN) simulation that models the behavior of city buses and cars as data carriers. This project sounds exciting and impactful! I have experience in building similar simulations and am familiar with the technical challenges involved in creating a robust DTN showcase. My approach would involve utilizing Python and data visualization tools to accurately simulate and analyze the networking behaviors you're aiming for. I have a few questions to get a better understanding: Q1 – What specific data scenarios do you want to simulate with the buses and cars? Q2 – Are there particular metrics or outputs you want to focus on for analysis? Q3 – Do you have an existing setup or framework that this simulation should integrate with? I’d be happy to go through the details and suggest the best technical approach. Looking forward to hearing from you.
$500 USD in 7 days
8.1
8.1

Hi There, Hope you are well. I am excited to work on the delay-tolerant networking (DTN) showcase project, creating a simulation of data mules in city vehicles. I will provide an interactive map with two forwarding strategies and deliver a comparative analysis of data transfer speed, number of hops, and message delivery rate. Let's collaborate for a successful outcome. Thanks in advance for the opportunity to working with you. Best Regards, Serazum
$300 USD in 1 day
7.6
7.6

Hello, I trust you're doing well. I am well experienced in machine learning algorithms, with nearly a decade of hands-on practice. My expertise lies in developing various artificial intelligence algorithms, including the one you require, using Python, and similar tools. I have worked with pytorch, and tensorflow to develop DL models, .I hold a doctorate from Tohoku University and have a number of publications in the same subject. My portfolio, which showcases my past work, is available for your review. Your project piqued my interest, and I would be delighted to be part of it. Let's connect to discuss in detail. Warm regards. please check my portfolio link: https://www.freelancer.com/u/sajjadtaghvaeifr
$700 USD in 7 days
7.9
7.9

Same seeded traces replayed for both strategies, so every contact event is identical and the metric gap reflects only the forwarding logic. Days 1-3: event-driven sim in Python with a Leaflet map (zoom, pan, click a bus to see its buffer) running one mode on your traces for you to check. Days 4-7: direction-aware mode, batch runs to CSV/PNG, write-up and run notes. Heading will be smoothed over several trace points, otherwise stops and turns make the direction-aware mode pick bad relays. 1. Are the traces real GPS logs, or should they be generated (e.g. SUMO) for a chosen city? 2. Should a transfer be instant on contact, or limited by contact duration and a data rate? Can start right after the prototype walkthrough.
$400 USD in 7 days
7.8
7.8

As an Electrical Engineer and a Master's graduate in Embedded Systems, I have the comprehensive skills required for your Interactive DTN Simulation and Analysis project. My experience revolves around firmware development, PCB design, and complete IoT product engineering - all of which are necessary to create an accurate simulation with an interactive map as you've described. With my vast knowledge of microcontrollers and embedded systems - including popular tools such as Python - I can provide an intuitive, browser-like visualization with zooming, panning, and node inspection capabilities. Additionally, I have extensive expertise in data analysis and visualization which will be instrumental in presenting the core findings of your project. I'm well-versed in generating concise yet comprehensive comparisons through datasets and visual representations like CSV files and PNG/PDF graphs. My familiarity with MATLAB will be particularly useful for this task. Moreover, my proficiency extends beyond coding to include technical documentation and grasping complex models, making me well-suited to help draft the main thesis points for your work.
$750 USD in 15 days
7.4
7.4

I propose to develop a delay-tolerant networking showcase focusing on data muling vehicles. The project involves creating a simulation with interactive map visualization, showcasing two forwarding strategies and comparing their performance metrics. I will leverage my experience in simulation development and data analysis to build a robust platform using Python. The simulation will simulate vehicle movements, packet transfers, and provide a browser-like visualization. I will deliver a dataset of recorded runs, a comparative graph/table, installation instructions, and a structured write-up outlining the simulation model, assumptions, forwarding logic, and key findings. I will refine the existing prototype and incorporate necessary elements like mobility libraries, GIS tiles, and animation frameworks for a more robust solution. I aim to deliver a high-quality, comprehensive project that exceeds expectations, setting the stage for a fruitful partnership focused on innovation and technological advancement.
$675 USD in 5 days
7.1
7.1

As an AI specialist who has a knack for implementing intelligent systems integrated with hardware, your interactive DTN simulation and analysis project is right up my alley. My extensive skills in Python, Data Visualization, Software Architecture along with experience working across React, Django, Node would be instrumental in developing your desired simulation model as well as the comparative analysis of the forwarding strategies. Given my IoT expertise, I can ensure smooth integration of MQTT-connected sensor networks into your simulation to provide precise and reliable data readings for analysis. Furthermore, being well-versed with Arduino, I can extract valuable insights from the mobility traces to generate a concise comparison that highlights key metrics including data transfer speed, number of hops, and message delivery rates. Equally important, I specialize in making AI systems production-ready rather than solely prototyping them. This means I will not only provide you with an executable simulation that features an interactive map and two selectable modes but also ensure a user-friendly and hassle-free experience for you by providing installation/run instructions. Together we can take your existing prototype to a fully-fledged project underpinned by thorough documentation which is essential for reproducibility and future scalability.
$500 USD in 7 days
6.5
6.5

I can build your delay-tolerant networking simulation with the interactive browser-based map, mobility traces, and the two selectable forwarding modes you need. Using Python for the backend simulation logic and a lightweight web stack for the visualization, I will implement the arbitrary send-whenever-in-range method alongside the direction-aware heading-based relay method. You will be able to zoom, pan, and click on any vehicle node to inspect its current payload in real time. After running both strategies across identical mobility traces, the system will output the comparative data transfer speed, number of hops, and message delivery rate into a clear CSV dataset along with a final comparative graph. I will also provide the complete installation and run instructions, plus a concise write-up outlining the thesis structure, simulation model, assumptions, and key findings to support your argument. We can schedule a quick call to walk through your existing prototype so I can refine parts of it directly. Let me know when you are available to connect.
$500 USD in 7 days
6.1
6.1

Hi, I am a software engineer with over 16 years of experience. I have extensive experience with network simulation and interactive visualization, turning complex system behavior into tools that are easy to explore and explain. I can build on your prototype to create a DTN showcase where buses and cars carry messages across an interactive map. You will be able to zoom, pan, inspect each vehicle’s payload, watch packet hops, and switch between send-whenever-in-range and direction-aware forwarding. I would compare both strategies using identical mobility traces and conditions, then provide recorded runs in CSV and a clear graph/table showing transfer speed, hop count, and delivery rate in PNG/PDF. I will also prepare a brief thesis write-up covering the simulation model, forwarding logic, assumptions, and findings, alongside straightforward installation and run instructions for reproducibility. I would start with a quick walkthrough of your prototype so I can reuse useful parts. Do you already have mobility traces, and should transfer speed be measured as delivery time or throughput? Please contact me to discuss details.
$750 USD in 14 days
5.9
5.9

Your direction-aware forwarding logic will fail if you're not modeling real-world contact windows — DTN simulations that assume infinite buffer space or ignore radio propagation delays produce misleading hop counts. This matters because your thesis conclusions depend on whether packets actually arrive under realistic constraints. Quick questions - are you working with GPS traces from actual bus routes, or synthetic mobility data? And what's your target message size, because fragmentation behavior changes dramatically above 1MB payloads? Here is the architectural approach: - PYTHON + FOLIUM: Build the interactive map using Folium for pan/zoom/click inspection, overlaying vehicle trajectories from your mobility traces with real-time packet state visualization. - SIMULATION ENGINE: Implement a discrete-event simulator that calculates contact opportunities based on Euclidean distance thresholds, then compares opportunistic flooding vs. heading-vector relay selection across identical runs. - DATA ANALYSIS: Generate CSV logs of per-message latency/hop-count/delivery-rate, then render comparative plots using Matplotlib that isolate the performance delta between your two forwarding strategies. I've built similar vehicular network simulations for a smart-city research project that modeled 200+ nodes across 48-hour traces. Let's schedule a 20-minute call to review your prototype and lock down the contact model assumptions before I start coding.
$450 USD in 10 days
5.8
5.8

Hi there, I can help build an interactive DTN simulation and analysis tool with clear visualizations, configurable simulation parameters, and meaningful performance metrics. I’ll focus on making the simulation results easy to explore and understand, with clean, well-documented code. Could you share the key simulation requirements so we can discuss the best approach for your project? Best regards, Fahad.
$250 USD in 2 days
5.6
5.6

I can build a reproducible DTN simulation that makes vehicle-to-vehicle forwarding easy to observe and compare. The implementation can include an interactive, browser-based map with zooming, panning, node selection, payload inspection, playback controls, and a clear switch between: • send-whenever-in-range forwarding • direction-aware relay selection I’ll run both strategies against identical mobility traces, record transfer speed, hop count, and delivery rate, then generate clean CSV outputs and side-by-side PNG/PDF visualizations. I can also structure the code so mobility data, communication range, packet behavior, and forwarding rules are configurable rather than hardcoded. Beyond the executable, I’ll provide straightforward installation and run documentation plus a concise thesis-oriented write-up or slide deck covering the simulation model, assumptions, forwarding logic, methodology, and interpretation of results. Your existing prototype can be incorporated where useful, while keeping the final setup reproducible and easy to demonstrate. A milestone-based workflow would cover the simulation foundation, interactive visualization, forwarding strategies, experiment automation, analysis, and documentation.
$250 USD in 2 days
5.5
5.5

Greetings! I can build your delay-tolerant networking showcase where city buses and cars act as data mules, ferrying messages from source to destination whenever communication is possible, as a runnable simulation on an interactive map where you can watch vehicles move, see packets hop between them, zoom, pan, and click a node to inspect its payload. I will implement both forwarding strategies, the arbitrary send-whenever-in-range method and the direction-aware method that picks relays by vehicle heading, and run them across identical mobility traces. You will receive an executable simulation with the interactive map and two selectable modes, a dataset of recorded runs plus a comparative graph and table covering data transfer speed, number of hops, and message delivery rate in CSV with PNG or PDF, installation and run instructions, and a brief write-up or slide deck outlining the thesis structure, simulation model, forwarding logic, assumptions, and how the results support your argument, using Matlab, Python, or another tool with existing mobility libraries, GIS tiles, or animation frameworks where they simplify reproducibility, and I am happy to walk through your prototype on a call and refine what fits. Thanks, Revival
$250 USD in 7 days
5.2
5.2

Hello, I'd be happy to develop your DTN simulation, where buses and cars act as data mules, and provide an interactive visualization comparing both forwarding strategies. I have experience with Python simulation, data analysis, and interactive visualization, and can build on your existing prototype rather than starting unnecessarily from scratch. I recommend Python with SimPy for event-driven simulation and Plotly/Dash for a browser-based map where you can zoom, pan, inspect vehicles, and switch forwarding modes. The main challenge is ensuring a fair comparison between arbitrary forwarding and direction-aware routing. I'd run both strategies against identical mobility traces, communication ranges, and message-generation conditions, then measure delivery delay, hop count, and delivery rate. I'd also account for message buffering and contact duration so packet transfers reflect realistic DTN behavior. You'll receive runnable source code, CSV results, comparison charts, setup instructions, and a concise thesis outline covering methodology, assumptions, and findings. Estimated timeline: 2–3 weeks. Two quick questions: • Does your prototype already include vehicle mobility traces? • Should the simulation use real city roads or synthetic vehicle movements? Best regards, Carlos
$250 USD in 7 days
5.6
5.6

Hi, I'm Waqas. I see you're looking to create an interactive simulation for delay-tolerant networking using vehicles as data mules. I can help you build a runnable simulation that showcases both forwarding strategies on an intuitive map, allowing you to zoom, pan, and inspect nodes easily. First, I would set up the environment using Python or MATLAB, depending on your preference, and integrate any existing mobility libraries or frameworks to streamline the process. Then, I would implement the two forwarding strategies and ensure the simulation accurately tracks data transfer speed, number of hops, and message delivery rate. Finally, I will compile the results into a comparative graph or table and assist in drafting the thesis points for your write-up. Please start the chat and share your vision so I can suggest the right next step and align the work with what you want. Best regards, Waqas
$250 USD in 3 days
5.0
5.0

Hi there, The challenge is turning your DTN prototype into a reproducible, interactive simulation where identical mobility traces can compare arbitrary forwarding with direction-aware relay selection. I have strong hands-on experience with Python, Software Architecture, and Data Visualization, and have solved similar problems involving simulation workflows, interactive maps, metric extraction, and comparative reporting. My approach would be to: * Review the existing prototype, mobility traces, assumptions, and current implementation. * Identify the root cause of any modeling or integration gaps and determine what can be reused versus what needs to change. * Implement a clean, maintainable solution using Python with a browser-like interactive map, selectable forwarding modes, node payload inspection, and reproducible run controls. * Test edge cases, reliability, performance, security, and integration behavior across identical traces, including transfer speed, hop count, and delivery rate. * Deploy or integrate the fix without disrupting the existing system, then provide CSV outputs, PNG/PDF comparisons, thesis-ready material, and run instructions. A key design point is to isolate mobility, contact detection, forwarding policy, and metric collection so both strategies receive exactly the same events and results remain statistically fair. I prefer fixing the actual root cause rather than applying temporary patches, and I will keep the implementation simple, stable, and mai
$700 USD in 14 days
4.6
4.6

I understand you're looking for a dynamic DTN simulation, similar to how you'd visualize network traffic flow on an interactive map. My experience with network simulation tools and geospatial data visualization allows me to build exactly the kind of real-time, visually rich showcase you're envisioning. I've previously developed similar interactive dashboards for complex system behaviors, ensuring clear and intuitive representation of data movement. For your DTN simulation, I propose using Python with libraries like `SimPy` for event-driven simulation, `GeoPandas` and `Shapely` for geospatial data handling, and `Plotly` or `Bokeh` for interactive map visualizations. We'll model vehicle movement based on predefined routes or dynamic paths, implement the two forwarding strategies as distinct simulation modules, and visualize packet delivery and hop counts directly on the map interface. This approach ensures a robust, extensible, and visually engaging simulation. To ensure we align perfectly, could you clarify the expected scale of the simulation (number of vehicles, message volume) and any specific performance metrics you'd like to track beyond packet delivery success? I'm confident I can deliver a high-quality, interactive DTN showcase. Let's schedule a brief call to discuss the technical details further.
$561 USD in 21 days
4.7
4.7

Hello, Fixed price: 480 USD, delivery in 10 days. Here is how I would build your DTN showcase in Python: 1. Mobility: bus routes and car traces on a real street graph (OSMnx), with a fixed random seed so both strategies replay identical traces. 2. Simulation core: discrete time steps, radio range check, store-carry-forward buffers, TTL and per-message logs. 3. Two modes: send-whenever-in-range, and a direction-aware relay that forwards only when the neighbor is heading closer to the destination. 4. Browser map (Leaflet): zoom, pan, play/pause, mode toggle, and click a node to see its current payload. 5. Batch runner exporting CSV per run plus a side-by-side PNG/PDF of delivery rate, hop count and transfer time. 6. Thesis outline: model, assumptions, forwarding logic and how the results support the argument, plus a README with run steps. I would go through your prototype first and reuse whatever already works. I can show a short demo with a few vehicles moving on the map before the full build. Question: which city or road network should the traces use, and do you have real bus routes or should they be synthetic? Best regards
$480 USD in 10 days
4.6
4.6

Your core need is a simulation where the same buses and cars carry messages under two forwarding rules, so you can compare delivery rate, hops and speed fairly on an interactive map. I've done the statistical analysis for an empirical thesis, including fixing design flaws in the analysis, so the write-up side is familiar ground. I'd write the engine in Python and show it on a Leaflet map you can zoom, pan and click. Both modes, send-whenever-in-range and heading-aware relay, replay the same seeded mobility traces. Any difference then comes from the rule and not from luck. Results export to CSV and PNG. M1: engine plus seeded traces on a road graph, $211. M2: Leaflet map with the mode switch, $214. M3: side-by-side comparison, exports, and thesis outline with key findings, $215. The total is $640. That holds if the traces are either generated in Python on a road graph or supplied by you as CSV, with no custom SUMO or real-city trace extraction. It also assumes the write-up is an outline and key findings in slides or a short document, not a full thesis chapter, and that your prototype is optional input and the map uses free OpenStreetMap tiles. If any of that is different, I re-quote before any work starts. Do you already have mobility data as CSV, or should I generate it?
$640 USD in 3 days
4.7
4.7

Jbeil, Lebanon
Member since Jun 23, 2018
₹600-1500 INR
$30-250 USD
$8-15 USD / hour
₹600-1500 INR
$30-250 USD
₹600-1500 INR
$250-750 USD
£20-250 GBP
$30-250 USD
$10-30 USD
$250-750 USD
$30-50 AUD / hour
$250-750 USD
₹12500-37500 INR
$15-25 USD / hour
$2-8 USD / hour
₹12500-37500 INR
₹1500-12500 INR
$30-250 USD
$10-30 AUD