Sonar Depth Meter

$750-1500 USD

Closed

Posted 4 months ago

$750-1500 USD

Paid on delivery

Development of a User-Friendly Sonar Depth Meter Project Description I am looking for an experienced electronics engineer/programmer to design and implement a sonar depth meter based on ultrasonic technology. The key requirement is the simplicity of operation on a "plug and play" basis (similar to the JSN-SR04T sensor) - without the need for complicated calibration by the end user. Scope of Work Electronic Circuit Design, including: Ultrasonic signal generator Transmitter driver for transducer control Receiver path with appropriate filter and signal detection circuit Control unit based on a microcontroller (STM32 suggested, but not mandatory) Temperature sensor for automatic sound velocity compensation User interface with LCD display and rotary encoder Factory pre-calibration of the system PCB Design, Production and Testing Electrical schematic in preferred format PCB layout design Component assembly Microcontroller Programming, including: Depth measurement algorithm with automatic temperature compensation Simple user menu without the need for technical configuration Automatic correction and filtering of measurements for greater stability Auto-calibration system at startup Waterproof Enclosure Development: Design and production of an enclosure with min. IP67 rating Installation of the piezoelectric transducer with waterproof sealing Technical Documentation: Detailed schematic diagram Bill of Materials (BOM) Simple user manual (plug and play) Source code with comments Technical Specifications Operating principle: plug and play Measurement range: 0.5 - 50 meters depth Measurement accuracy: ±10 cm or better Automatic temperature compensation in the range of 0-30°C Waterproof rating: minimum IP67 Power supply: constant 16V (power supply circuit is already designed) User interface: 16×2 LCD display with I2C interface, rotary encoder with button No need for manual calibration by the user Notes on the Piezoelectric Transducer The piezoelectric transducer can be: 200 kHz frequency Dual frequency 200/83 kHz Other frequency as recommended by the freelancer The choice of transducer and its driving technology is left to the discretion of the developer, depending on their experience and ability to achieve the best measurement results. Required Skills and Experience Experience in designing analog and digital electronic circuits Experience in microcontroller programming Experience in PCB design Ability to create intuitive user interfaces Knowledge of working principles with piezoelectric transducers and ultrasound Experience in creating waterproof devices Experience in designing "plug and play" devices Expected Results Complete sonar depth meter project, including: Full electrical schematic PCB design ready for production Working prototype meeting specifications Software providing "plug and play" operation Complete project documentation Testing of the device in real conditions Demonstration of operation and usage instruction Budget Project budget: [negotiable, depending on experience and scope of work] Interested parties please send a portfolio with examples of similar "plug and play" electronic projects and an initial project estimate.

Electronics

PCB Layout

Electrical Engineering

Microcontroller

STM32

Project ID: 39216083

About the project

36 proposals

Remote project

Active 3 mos ago

Looking to make some money?

Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

Get paid for your work

Outline your proposal

It's free to sign up and bid on jobs

36 freelancers are bidding on average $1,178 USD for this job

@Mahihassi

With a strong background in electrical engineering and a Master's degree in Embedded Systems, I bring a unique skill set to the table that makes me a perfect match for your Sonar Depth Meter project. Throughout my career, I've worked extensively with microcontrollers such as Raspberry Pi, ESP32, STM32, and Tiva, which aligns perfectly with the control unit design requirement of your project. My proficiency in PCB Design using tools like Eagle, Target, and Kicad can ensure a smooth production process for you. One of the major highlights of my profile is my experience in creating "plug and play" electronic devices. I understand the demand for simplicity in operation and can develop systems that don't require complicated calibration by the end user. This resonates perfectly with your requirement for a simple user menu in your sonar depth meter. Being experienced with the design of waterproof devices that hold high IP ratings (IP67 minimum in this case), I comprehend the importance of precision and reliability in your desired measurements. My knowledge and familiarity with piezoelectric transducers for ultrasound work can help me select/develop the best components to achieve accurate results. Together we can turn this project into a masterpiece of simplicity, functionality, and reliability well-within your budget!

$1,500 USD in 7 days

5.0

(260 reviews)

8.0

@mairajali11

As a verified Electrical/Electronics Engineer with over 8 years of experience in designing PCBs, I understand the importance of producing a user-friendly and efficient product. My expertise in Eagle, Altium, KiCAD & EasyEDA will facilitate the successful completion of your sonar depth meter project. I am skilled in microcontroller programming and have hands-on experience with STM32 (similar to your suggested controller) which will be an asset as we develop the control unit and depth measurement algorithm for automatic temperature compensation. Additionally, my experience with piezoelectric transducers will be instrumental when it comes to selecting the best option and designing their driving technology for optimal results. Moreover, I have a proven track record of creating waterproof devices which attests to my ability to survive different environmental conditions, making it imperative for our meter's operation. I believe in open communication and transparency, so you can expect a detailed schematic process from me along with a bill of materials. Alongside this, I am adept at developing clean and maintainable code, which you will find evident in my approach as I build a simple yet intuitive user interface that requires no manual calibration by the end user. In short, my commitment to excellence and broad range of skills make me the perfect fit for this project.

$1,050 USD in 7 days

4.9

(131 reviews)

6.6

@AwaisChaudhry

Hello, I understand that you are looking for a professional to develop a user-friendly sonar depth meter using ultrasonic technology. My approach focuses on creating a simple, plug-and-play device that eliminates the need for complicated user calibration, ensuring ease of use. I will design the electronic circuits, including the ultrasonic signal generator, control unit, and temperature sensor for automatic compensation. Additionally, I will handle the PCB design, microcontroller programming for measurement accuracy, and develop a robust waterproof enclosure with a minimum IP67 rating. Moreover, I'll ensure comprehensive technical documentation, including schematics, BOM, user manuals, and well-commented source code. I have extensive experience in electronics and microcontroller programming, which I believe aligns well with your requirements. What specific features do you desire for the user interface, and how do you envision the interaction between the user and the sonar depth meter? Thanks, Muhammad Awais

$1,500 USD in 12 days

5.0

(2 reviews)

5.9

@manusharma2992

As an experienced electrical engineer, I am well-equipped to tackle the complexities of developing your Sonar Depth Meter. Having designed several analog and digital electronic circuits and programmed numerous microcontrollers, I am confident in my ability to deliver a robust and user-friendly solution. Designing "plug-and-play" devices has been a specialty of mine throughout my career. I understand the importance of simplicity in operation, especially when it comes to calibration which I am happy to handle thoroughly, and believe my skills will lend themselves perfectly to the end-user experience you're hoping to achieve. Sincerely Manu R.

$755 USD in 2 days

5.0

(7 reviews)

5.3

@engrusmanfaiz

I'm Electrical Design Engineer and having expertise in Esp32 Arduino Microcontrollers, STM 32 Arduino Microcontrollers firmware,MATLAB, PCB designs, Altium PCB layout developer and electronic circuits. I can design and develop a plug-and-play sonar depth meter, including circuit design, PCB layout, firmware (STM32), and waterproof enclosure, ensuring automatic temperature compensation, stability filtering, and factory pre-calibration. I have more than 8 years of experience in the field of Electrical engineering and Esp 32 Arduino Microcontrollers PCB designs. I have done PhD in electrical engineering. Hire me once and see the expected results of I can deliver a fully documented, production-ready prototype. Let’s discuss the budget and timeline based on project complexity. Portfolio available upon request. Regards Engr Usman

$825 USD in 3 days

4.5

(34 reviews)

5.4

@electronicsdone

Best Sonar Depth Meter Expert! ⭐⭐⭐⭐⭐ Dear Piotr, I can help design and develop a user-friendly sonar depth meter with plug-and-play functionality. With over 30+ years of experience in ultrasonic measurement systems and embedded electronics, I will ensure a precise, reliable, and easy-to-use depth measurement system. ✅ Valuable Suggestion: Consider adding a Bluetooth or Wi-Fi module to allow remote data logging and mobile app connectivity for enhanced usability. ✅ Why Choose Me? 1. Expert in Ultrasonic & Sonar Systems – I have designed multiple ultrasonic ranging systems using JSN-SR04T, piezoelectric transducers, and STM32 MCUs. 2. Proven PCB Development – I have extensive experience in PCB layout design, analog/digital filtering, and signal processing for high-accuracy measurements. ✅ Proposed Design: 1. Ultrasonic-Based Depth Measurement: High-accuracy sonar detection with automatic temperature compensation. 2. User-Friendly Interface: 16×2 LCD display with rotary encoder control for easy operation. 3. Plug-and-Play Calibration: Pre-calibrated system eliminates the need for manual adjustments. ✅ Quick Question: Do you have a preferred transducer frequency (e.g., 200 kHz, 83 kHz, or dual-frequency), or should I suggest one based on your accuracy requirements? Looking forward to delivering a high-precision, plug-and-play sonar system for you! Best regards, PCB Must Innovations

$1,000 USD in 4 days

3.4

(15 reviews)

6.4

@assignsolver

I am Faisal Mahmood, I have more than 10 Years of experience in crafting tailored solutions for success, including; Business Plans, Pitch Decks, Feasibility Reports, Resumes, Cover Letters, and LinkedIn profiles. Over the past ten years, I have consistently delivered exceptional results, helping clients navigate the competitive landscape with precision and finesse. With a proven track record spanning ten years, I bring a wealth of experience to every project, ensuring not just quality but a profound understanding of evolving industry dynamics. My approach is rooted in precision, innovation, and a relentless pursuit of perfection, setting a standard that goes beyond expectations. I am damn sure that you will love my services, try me once at least. I am anxiously waiting for your messages.

$750 USD in 1 day

4.6

(13 reviews)

4.0

@dannisacsl

I m a 20 years experience electronic engineer in MCU and PC firmware development, also familiar developer in most popular ARM Cortex-M MCU brands like Nordic, ST, ……etc. and Visual studio developer(VB, C# .net), and Circuit design in Schematic and PCB layout I have good experience in wearable device and usually work with mobile app or IoT for data management, I have a series smartwatch that use nRF52832/nRF52840/nRF5340 MCU and with BLE mobile app pairing, and also nRF9160/nRF9161 for IoT Server connection, our team have professional app/web developer to support us. I have experience in ultrasonic distance meter before, but its a simple radar type object close alert system. My working base in Hong Kong, have good environment to sourcing in China for lower cost and well communicate to global. Our service including project management, circuit design(Schematic/PCB Layout), PCB manufacturing, firmware development(MCU/App/Web Page/Desktop Application), I sure that can have a perfect solution to you. I look forward to discussing this project in more detail and showcasing how my expertise can bring value to your project.

$1,125 USD in 10 days

5.0

(8 reviews)

3.7

@bajicnalog22

Hi, how are you? As a seasoned professional with expertise in AI and full stack development, I offer a unique blend of skills that align perfectly with your project's requirements. Although my core skills don't specifically include sonar depth meters and piezoelectric transducers, my proficiency in microcontroller programming, analog/digital circuit design, PCB layout, and UX design uniquely positions me to deliver the user-friendly, plug-and-play solution you need within given budget. My background in web3 development aligns well with the project's requirement to develop a complete documentation and conduct comprehensive testing before demonstrating the usage instructions. In summary, I bring a unique blend of diverse skills that can accelerate your sonar depth meter project while ensuring quality and simplicity that your users would appreciate. Let's discuss further on how my approach can benefit your project.

$750 USD in 7 days

5.0

(1 review)

3.6

@TopWritingGuru

My name is Rabia Faisal, I am working in the writing industry since 2011. During this time, I have served countless clients with a full amount of satisfaction by providing them with TOP Quality Solutions. I have command of all references APA, Harvard, IEEE, MLA & Chicago, etc. I will provide plagiarism-free work with 100 percent accurate grammar within your given deadline. Please message me to get Top Class Services. I am waiting; https://www.freelancer.com/u/TopWritingGuru

$750 USD in 1 day

5.0

(7 reviews)

3.0

@rachidSoussi

I am a hardware engineer specialized in electronic design. My expertise includes PCB design, low-level programming, and AI integration in embedded systems. With these skills, I create optimized and innovative solutions to meet the demands of intelligent systems.

$750 USD in 7 days

5.0

(4 reviews)

3.0

@redbrickamerica

Hello there! I am ready to take on the development of a User-Friendly Sonar Depth Meter with a plug-and-play interface, based on ultrasonic technology. The project involves electronic circuit design, PCB layout, microcontroller programming, waterproof enclosure development, and technical documentation. I will ensure a measurement range of 0.5 - 50 meters with ±10 cm accuracy. Additionally, the device will feature automatic temperature compensation and a waterproof rating of at least IP67. With expertise in Electrical Engineering, PCB Layout, Electronics, STM32, and Microcontroller programming, I am well-equipped to deliver a cutting-edge solution that meets your requirements. Cheers, RedBrick American Engineering

$750 USD in 2 days

5.0

(1 review)

2.8

@sakshis576

I’LL FINISH IT QUICKLY FOR YOU As an experienced electrical engineer with a strong proficiency in designing "plug and play" devices, I believe I'm an excellent fit for your 'Sonar Depth Meter' project. My track record includes designing & implementing similar ultrasound-based systems. From the ultrasonic signal generator to the microcontroller-based control unit, my approach guarantees simplicity without compromising functionality. I specialize in designing waterproof electronic systems, which will be crucial for your-depth meter. My experience with piezoelectric transducers and ultrasound will help me determine the best driving technology for the transducer, ensuring accurate depth readings within the range specified. Furthermore, my expertise in creating intuitive user interfaces will help to provide a simple, hassle-free experience via our 16×2 LCD display. Best regards, Sakshi

$767 USD in 2 days

5.0

(1 review)

2.7

@ahmedElnaqeeb96

Hello, Thanks for your job posting. I have read your project details carefully, and I’m ready to handle it and deliver on time with high quality. I’m an Embedded systems engineer with more than three years of experience designing and developing software and hardware for various projects using microcontrollers such as PIC, AVR, STM32, and TIVAC. That’s a sample of my projects: - Self-driving car prototype - Handy powerpack manager - Obstacle avoidance robot - Fighter robot - Line follower robot I will offer you this project: - Efficient software and hardware design. - Complete flow chart for software or system behavior. - Well commented software and documentation by using the Doxygen tool. - Provide hardware circuit schematic and PCB layout. So I look forward to hearing from you soon to discuss more details. Thanks, Ahmed Ashraf

$1,000 USD in 90 days

5.0

(1 review)

2.2

@harvinder15291

Hello Sir I have reviewed your project description for Development of a User-Friendly Sonar Depth Meter and am excited about the opportunity to contribute. With five years of experience in the field, I have worked with a variety of electrical systems and components. My expertise includes: A strong understanding of electrical engineering principles and techniques Designing, testing, and troubleshooting electrical systems Proficiency in circuit design, embedded systems, and power electronics Hands-on experience with various electrical engineering tools I am confident that my skills will be valuable to your project and am hopeful for a long-term collaboration. Thanks and regards, Harvinder

$778 USD in 2 days

1.7

(2 reviews)

2.9

@mateigeorgian

Hello, My major subject is acoustics and I am confident in ultrasound technology. I have a solid background in electronics design and microcontroller programming, coupled with a passion for creating various ultrasonic devices. When we develop an ultrasonic device, the most important technology is to make match between transducer and electronic side. I specialize in this matching technology. In the last years I developed various ultrasonic devices such as ultrasonic range meter, ultrasonic welding machine and ultrasonic fog produce device. I can provide a complete solution from circuit design to prototype testing, ensuring that your sonar depth meter works seamlessly over its entire range. I am confident and ready to get to work. I'm looking forward to working on this innovative project! Regards, Georgian M.

$1,200 USD in 30 days

5.0

(1 review)

0.9

@engahsanali

Dear Piotr K., I see you're looking for someone with experience in PCB Layout, Electronics, Microcontroller, STM32 and Electrical Engineering, and I believe my background aligns well with your needs. I’ve had the privilege of working on many projects with similar tech stacks, and I’m confident in my ability to help you meet your objectives. Here are a few questions to get started: 1. Are there any key features or requirements you’re looking to prioritize? 2. Will you be providing any resources, or is this project to be developed from scratch? 3. What’s your target timeline for project delivery? Here’s why I’m a great fit: - Over 250 successful projects with 5-star ratings. - Clients consistently return due to my dedication and quality work. - Available full-time to ensure fast and efficient delivery. I’d love to chat more about your project and how I can assist. Feel free to reach out for further information or to see recent work samples. Sincerely, Ahsan Ali

$750 USD in 2 days

0.0

(0 reviews)

0.0

@RobertWadejnr

Hello, Greetings Piotr K., I am an experienced electrical engineer with skills including STM32, Electrical Engineering, PCB Layout, Microcontroller and Electronics. I have good experience in this field, and I have already done many similar projects perfectly, so I am sure I can complete your project perfectly, too. If you want, I will share some examples of my previous work. I want to discuss the details with you. Please contact me to discuss more about this project. Thanks.

$1,000 USD in 7 days

0.0

(0 reviews)

2.0

@invokemedia

Hi, I can design and develop a user-friendly sonar depth meter with plug-and-play functionality, ensuring accurate depth measurements without manual calibration. My expertise in electronics, microcontroller programming (STM32), PCB design, and waterproof enclosures guarantees a reliable and efficient solution. I’ll deliver: A fully functional prototype with PCB and firmware Pre-calibrated system with automatic temperature compensation IP67 waterproof enclosure with a user-friendly LCD interface Complete documentation, including schematics, BOM, and source code Let’s discuss how I can bring this project to life!

$1,399 USD in 9 days

0.0

(0 reviews)

0.0

@sayodr

Hello, I'm sayod razib, with over 5 years of experience in graphic design. I'm here around the clock, ready to assist you with a wide range of graphic design tasks. Proficient in the latest design software such as Adobe Illustrator, Photoshop, In Design, and Coral Draw, I ensure that your projects meet the highest design standards. My expertise extends to various printing techniques and color management, guaranteeing that your projects look stunning.

$1,125 USD in 7 days