
Closed
Posted
Paid on delivery
I need a custom control board that continuously gathers readings from my sensors, logs the information, and makes it immediately viewable on a PC. The board should revolve around a reliable microcontroller, include the required signal-conditioning front end for the sensors, handle power regulation, and expose a simple USB (or comparable) interface so the computer can pull or receive the data in real time. Here is what I expect from you: • Complete schematic capture and multilayer PCB layout ready for fabrication • Cleanly organised BOM with part numbers that are actually in stock • Manufacturing files (Gerber/ODB++, drill, pick-and-place) plus 3D step model • A basic firmware template that proves PC connectivity and streams or stores the sampled values I am comfortable if you work in Altium, KiCad, or Eagle—please just stay consistent and share the editable project files along with the exports. Design for low noise and ease of assembly is important to me; all passives should be 0805 or smaller, with USB-C preferred for the data port. Once I receive the finished files and can open them, build the board locally, and see the test firmware delivering data to my computer, I will consider the milestone complete. If any clarification is needed, feel free to ask before starting so we hit the target the first time.
Project ID: 40795137
30 proposals
Remote project
Active 7 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
30 freelancers are bidding on average $39 USD for this job

Hi, I have experience in designing Circuits and can complete your project. I have expertise in the following: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. 4- I can also develop smartphone apps to communicate and control the hardware. If you wish we can discuss in chat. Thank you.
$20 USD in 7 days
7.4
7.4

Your data-logging board needs both careful multilayer PCB design and embedded expertise, and I bring over 8 years of experience as a verified Electrical/Electronics Engineer and professional PCB designer. I work with Altium, KiCad, Eagle, and EasyEDA, enabling me to provide consistent editable design files alongside fabrication-ready outputs. My background in embedded systems, microcontrollers, signal processing, C/C++, and tools such as LTspice, PSpice, Proteus, and Multisim directly supports the sensor front end, low-noise circuitry, power regulation, and test firmware requirements. I can deliver the schematic, organized BOM, multilayer layout, Gerber/ODB++ and drill files, pick-and-place data, 3D STEP model, and a firmware template demonstrating PC connectivity and sampled-data streaming. My PCB work will also follow your 0805-or-smaller passive preference and USB-C requirement. As a Preferred Freelancer ranked among the top 1% of skilled professionals, I am ready to turn this design into a buildable, well-documented board. Choose me to develop the complete PCB and embedded project files for your local fabrication and testing.
$20 USD in 7 days
6.9
6.9

السلام عليكم Hello, I can handle the complete development of your custom sensor control board, from hardware design to firmware and PC communication. My approach will be: - Design and review the complete schematic, including sensor signal conditioning and power regulation. - Develop a multilayer PCB with low-noise routing and assembly-friendly component placement. - Select reliable components with available stock and provide a detailed BOM. - Develop basic firmware to acquire sensor readings and stream data to a PC through USB. - Provide the complete editable project, Gerbers, drill files, pick-and-place, 3D STEP model, and firmware source. I have completed 50+ electronics and embedded systems projects, including custom STM32 and ESP32 boards, industrial control systems, and IoT hardware. I can start by reviewing your sensor requirements and defining the hardware architecture before moving to PCB design. Best regards Eng Mahmoud Ibrahim Electronics Enginner Replies in 10min
$20 USD in 7 days
5.6
5.6

Your data-logging board needs more than a schematic—it needs an electronics design that can move cleanly from concept to fabrication, and my skills in Electrical Engineering, Electronics, and PCB Layout align directly with that requirement. I can create the complete schematic and multilayer PCB layout while keeping signal integrity, low-noise operation, compact 0805-or-smaller passives, and assembly practicality in focus. My broader engineering and product-design background supports the additional deliverables you need, including an organised BOM, manufacturing-ready documentation, editable project files, fabrication exports, and a 3D model for mechanical review. I can also provide the basic microcontroller firmware template needed to establish the PC interface and demonstrate sensor data streaming or storage. I am ready to deliver a consistent, buildable control-board package that you can open, manufacture locally, and evaluate with connected test firmware. Choose me to turn this data-logging concept into a practical PCB design.
$35 USD in 1 day
5.6
5.6

Hello, I’m an Electrical/Electronics Engineer with 15+ years of experience in STM32 firmware development, PCB design, sensor interfacing, analog signal conditioning, and USB communication. I can develop your complete control board, including MCU selection, low-noise sensor front ends, power regulation, USB-C connectivity, and multilayer PCB layout. I’ll also provide firmware for sensor acquisition and real-time PC data streaming, along with the editable Altium/Proteus project, schematic, BOM with LCSC/Mouser part numbers, Gerbers, drill files, pick-and-place, and 3D STEP model. I focus on practical, cost-effective, manufacturing-ready designs with proper testing and documentation. Best regards, Hamza
$30 USD in 2 days
5.4
5.4

Custom IoT hardware spanning PCB design, microcontroller firmware, and live sensor connectivity is a core part of my work, making this data-logging control board a strong fit. I work across electrical engineering, embedded systems, microcontrollers, firmware development, and PCB layout, so I can cover the complete path from sensor inputs and signal conditioning through power regulation, USB communication, and fabrication-ready design files. My hardware experience includes ESP32/STM32 firmware and MQTT-connected sensor networks, which directly supports your need for a reliable embedded controller and a firmware template that streams or stores sampled values for PC access. I can provide consistent editable project files together with the schematic, multilayer layout, organised BOM, manufacturing outputs, pick-and-place data, and 3D model, while keeping low-noise design and assembly considerations central to the board. I would be glad to build a complete, locally manufacturable board package with working PC connectivity and test firmware.
$20 USD in 7 days
5.2
5.2

Your data-logging control board needs precise electronics and a fabrication-ready PCB, and my Electrical Engineering, Electronics, and PCB Layout skills directly match that requirement. I can develop the schematic and multilayer layout around the sensor interfaces, microcontroller, signal-conditioning circuitry, regulated power supply, and USB-C data connection while keeping the design clean and assembly-friendly. I can also prepare the organised BOM, manufacturing outputs, drill and pick-and-place files, 3D STEP model, and editable project files in a consistent PCB design workflow. My engineering and 3D modeling background supports accurate board documentation and clear 3D review, while the firmware template can demonstrate PC connectivity and sensor-data streaming or storage. I am ready to deliver a complete, reviewable PCB package that you can fabricate locally and validate with test firmware. Choose me to turn your data-logging requirements into a practical electronics design.
$150 USD in 2 days
5.0
5.0

This is not an AI-generated bid like all the others I saw. As you can see in my portfolio on my profile, I have extensive experience designing PCBs and mass production equipment, just like you need. I can handle your project. I apologize for the simple proposal; I know you're probably tired of reading AI-generated proposals, and I'd rather not waste time on that. If you're interested in working with me, send me a message and we can work out the details! Best Regards!
$250 USD in 15 days
4.8
4.8

My PCB design, microcontroller, and electronics skills align directly with your need for a custom data-logging control board. I can create the complete schematic and multilayer PCB layout, including sensor signal-conditioning circuitry, power regulation, USB-C connectivity, and practical component selection for low-noise operation and straightforward assembly. I would be glad to deliver a consistent, complete electronics package that you can open, manufacture locally, and test with the included firmware. Choose me to develop your data-logging PCB from schematic through demonstrable PC communication.
$50 USD in 1 day
3.9
3.9

Our combined expertise in microcontrollers, embedded systems, and PCB layout directly matches your need for a complete data-logging control board. I design electronic systems through the full development cycle, using KiCad, Proteus, and Altium Designer for schematic capture and multilayer PCB implementation. My background in advanced electronic design and high-frequency PCB design supports careful attention to signal integrity, low-noise operation, power regulation, and practical assembly. I also develop embedded systems with Arduino and C/C++, enabling me to provide the firmware template needed to demonstrate sensor sampling and real-time PC connectivity. My skills in electrical engineering, electronics, microcontrollers, and PCB layout align with the hardware, manufacturing documentation, and editable project-file requirements. I can deliver a consistent, fabrication-ready design with the requested schematic, BOM, manufacturing exports, 3D model, and connectivity test firmware. I would be glad to take responsibility for this board from design through a locally buildable prototype.
$20 USD in 7 days
3.6
3.6

My background in electronics, embedded systems, and microcontroller development directly matches the core of this data-logging PCB project. I also hold a Bachelor’s degree in Computer Science and a PhD in Artificial Intelligence, giving me a strong foundation for connecting reliable hardware with firmware and PC-side data workflows. I can contribute to the complete embedded design scope, including schematic capture, multilayer PCB layout, sensor signal conditioning, power regulation, USB-C connectivity, BOM preparation, and fabrication outputs. My software engineering experience is especially relevant to the firmware template: I can create a clear proof-of-connectivity application that samples values and streams or stores them for computer access. I will keep the design organised, assembly-conscious, and provide editable project files alongside the required manufacturing exports and 3D model. My combination of electronics, microcontroller, and software expertise makes me well suited to deliver a board that is practical to build and straightforward to test. I would be glad to take responsibility for this project and help turn your sensor concept into a usable hardware and firmware package.
$10 USD in 7 days
2.2
2.2

Hi there, Which sensors and output ranges need the front end to support, and do you want USB CDC, HID, or a custom protocol for live data? Should the firmware focus on continuous streaming only, or also include local buffering when the PC connection drops? The main challenge is balancing low-noise analog capture with reliable USB communication on a compact board. A solid approach is to choose the MCU, design the sensor conditioning around its ADC limits, then build the power tree, USB-C interface, and layout rules together so the analog and digital sections stay clean. One risk is ground noise and USB interference affecting sensor readings. That is best handled with careful partitioning, short return paths, filtered inputs, and a layout that keeps clocks, switching regulation, and analog traces separated. Can deliver editable project files, fabrication outputs, BOM with in-stock parts, and a firmware template that proves PC connectivity and data transfer. Testing would cover schematic checks, DRC, assembly readiness, and a quick bring-up path so the board can be built and validated with less rework. Best, Hlib
$25 USD in 6 days
2.4
2.4

Hi, I can help design a microcontroller-based sensor data-logging PCB that collects sensor readings, processes the data, and transfers it to a PC through a USB-C interface. Proposed Approach Review the sensor specifications, measurement ranges, and required input channels. Select a suitable microcontroller based on ADC, I2C, SPI, UART, and USB requirements. Design the complete schematic with sensor interfaces and signal-conditioning circuits. Implement suitable filtering, amplification, and input protection. Design the power regulation circuit for stable operation. Create a multilayer PCB layout with low-noise routing and compact component placement. Develop basic firmware for sensor sampling and USB data transmission. Verify the design and prepare the manufacturing files. Deliverables Complete editable schematic and PCB project. Multilayer PCB layout. Component BOM with manufacturer part numbers. Gerber and drill files. Pick & Place files. 3D STEP model. Basic firmware source code for sensor sampling and USB communication. PC connectivity and data-streaming demonstration. Design notes and pin-mapping documentation.
$24 USD in 7 days
2.3
2.3

Hello, I have solid experience in electronics design, microcontroller-based systems, PCB development, and embedded firmware. I can take your project from schematic design through PCB manufacturing files and firmware testing. I can provide: - Complete schematic design and multilayer PCB layout using KiCad or Altium. - Reliable microcontroller selection with low-noise sensor signal conditioning. - Stable power regulation and USB-C connectivity. - An organised BOM with verified component part numbers and availability. - Complete Gerber, drill, pick-and-place, and 3D STEP files. - Basic firmware for sensor data acquisition and real-time USB communication with a PC. I will focus on a clean layout, 0805 or smaller components, signal integrity, and easy manufacturing and assembly. I will also provide the editable design files and test the firmware to demonstrate reliable PC connectivity and data streaming. I would be happy to review your sensor specifications and turn your requirements into a practical, production-ready design. Best regards, Engr. Muhammad Uzair
$18 USD in 3 days
1.9
1.9

Hello, I can develop your custom sensor data acquisition board, covering the complete hardware design and firmware integration. I'll use a reliable microcontroller with appropriate sensor signal-conditioning circuits, low-noise power regulation, and a USB-C interface for real-time communication with a PC. My deliverables will include: - Complete schematic design and multilayer PCB layout. - Carefully selected components with verified manufacturer part numbers and supplier availability. - Organised BOM with sourcing information. - Manufacturing files (Gerbers, drill files, pick-and-place). - 3D STEP model of the PCB. - Editable KiCad/Altium project files. - Basic embedded C firmware for sensor acquisition and USB communication, demonstrating real-time data streaming to a PC. I'll pay particular attention to signal integrity, noise reduction, component placement, and assembly requirements, keeping all passives within the specified 0805 footprint or smaller. I'll also organise the design and documentation so you can easily review, manufacture, assemble, and test the board locally. I suggest confirming the sensor specifications and required sampling rates before starting to ensure the hardware and firmware are designed around your exact requirements. I'm ready to get started.
$20 USD in 7 days
1.7
1.7

For a data logger like this, I'd build the board around an STM32 with a proper analog front end, a low-noise LDO supply and a USB-C port that shows up as a virtual COM port on your PC. You'll get the KiCad project, schematic, 4-layer layout, BOM with in-stock parts, Gerbers, drill, pick-and-place, STEP model and a simple streaming firmware template. All passives will be 0805 or smaller. Some of my KiCad boards are in my portfolio. I can deliver in about a week.
$28 USD in 7 days
0.5
0.5

Hello, A complete-system approach to electronics and firmware makes me well suited to your data-logging control board. I work across electronic circuit design, schematic development, component selection, PCB layout, microcontroller integration, and hardware-software communication, matching your need for a reliable board that connects sensors, power regulation, storage or streaming, and PC access. My embedded systems and firmware development skills support the basic test firmware required to prove connectivity and deliver sampled values to a computer. I can also prepare the organised BOM, manufacturing-ready design files, PCB layout, and editable project files while keeping the design focused on low noise, practical assembly, and your 0805-or-smaller passive and USB-C preferences. My Electrical Engineering and Electronics background helps me consider the circuit and firmware together rather than treating them as separate deliverables. I would be glad to deliver a coherent, fabrication-ready hardware and firmware package that you can open, build locally, and test with your PC. Thanks!
$30 USD in 1 day
0.0
0.0

Hello, I can help develop your custom sensor acquisition PCB, from circuit architecture and low-noise signal conditioning to fabrication-ready files and firmware for real-time PC monitoring. **My proposed approach:** - **Hardware Architecture:** Select a reliable MCU based on sensor types, sampling rates, resolution, and communication requirements. - **Signal Conditioning:** Design appropriate filtering, amplification, protection, and ADC interfaces for accurate sensor readings. - **PCB Design:** Create a compact multilayer board with proper grounding, power integrity, noise isolation, and 0805-or-smaller passives. - **USB-C Connectivity:** Implement reliable PC communication using USB CDC or another suitable protocol. - **Firmware:** Develop a basic firmware template for sensor sampling, timestamping, data streaming, and optional local logging. - **Verification:** Perform ERC/DRC checks, review manufacturability, and prepare a practical PC-side testing procedure. **Deliverables:** Editable KiCad/Altium project, schematics, PCB layout, BOM with verified component availability, Gerbers, drill files, pick-and-place data, STEP model, and firmware source. I recommend validating the sensor interfaces and sampling requirements before selecting the MCU and ADC architecture. Could you share your sensor models, channel count, sampling frequency, and power requirements? Best regards, Fahad
$10 USD in 1 day
0.0
0.0

Hi, this is Leon from Tomorrowbits. I understand you need a low-noise sensor board that captures readings continuously and makes them available to a PC over USB-C, with editable design files and firmware you can verify locally. Our team can coordinate the schematic, multilayer layout, firmware, and fabrication package. The key is matching each sensor’s output range and bandwidth to its conditioning and ADC path, since that shapes the noise performance and PCB layout. I’d confirm the sensor interfaces and sampling needs, then create the design in KiCad or Altium with considered ground returns, regulated rails, and 0805-or-smaller parts. A USB-C-capable MCU can stream readings over serial for a straightforward PC connectivity test. We’ll provide editable files, a BOM checked against distributor stock, fabrication outputs, and a STEP model. Keeping the firmware test aligned with the board design will make local assembly and bring-up easier to check, without leaving manufacturing details to guesswork. Could you please share the sensor models, output types, and expected sampling rate so we can choose the right front end and MCU?
$18 USD in 4 days
0.0
0.0

✳️~~~~~⫷⫷⫷⫷⫷HELLO!⫸⫸⫸⫸⫸~~~~~✳️ The key to this design is achieving accurate, low-noise sensor acquisition while ensuring reliable real-time USB-C communication with the PC. I can help develop the complete microcontroller-based control board, including sensor signal conditioning, power regulation, schematic capture and multilayer PCB layout. My proposed approach: • Select a suitable MCU and ADC architecture based on sensor requirements. • Design low-noise analog front ends, grounding, filtering and power distribution. • Complete the PCB layout with 0805-or-smaller components and USB-C connectivity. • Develop firmware for sensor sampling and continuous PC data streaming. • Deliver editable design files, verified BOM, Gerbers, drill files, pick-and-place data and 3D STEP model. I would also prioritize component availability, manufacturability and clear documentation so the board can be assembled and tested without unnecessary revisions. Could you share the sensor types, output ranges, required sampling rates and number of channels? These details will help establish the correct MCU, ADC resolution and analog front-end design. I'd be happy to discuss the specifications and agree on the first milestone. Thanks.
$20 USD in 7 days
0.0
0.0

Dubai, United Arab Emirates
Payment method verified
Member since Mar 17, 2019
$30-250 USD
$250-750 USD
$30-250 USD
$10-30 USD
$30-250 USD
$250-750 USD
$30-250 USD
₹600-1500 INR
₹600-1500 INR
€12-18 EUR / hour
$10-20 SGD / hour
£20-250 GBP
$10-30 USD
$250-750 USD
$250-750 USD
$30-250 CAD
$250-750 AUD
$3000-5000 USD
$250-750 AUD
₹100-400 INR / hour
$250-750 USD
$250-750 AUD
₹5000-6000 INR
$250-750 AUD
₹600-1500 INR