Find Jobs
Hire Freelancers

Inspection service in La Coruña, Espagne

€70-140 EUR

Đã đóng
Đã đăng vào hơn 5 năm trước

€70-140 EUR

Thanh toán khi bàn giao
Inspection service in La Coruña, Espagne date : 27.12.2018 scope: 1. 100% Visual, Dimensional and Quantity check to see if all items are complying with our PO materials list and required spec in page 8 and 9 technical requirements.(file will be deliverd) 2. Checking all required points according to whatever mentioned in our PO. 3. Review of precise matching of each Heat Number mention on Material Test Certificates and Punched Heat Number on materials. 4. All items shall be new and free from any defect or pitting or serious rusting. 5. All original certificates shall be reviewed, signed and stamped by inspector. Note: All MTC certificates should be either original or original version should has /be truly copied by the third party inspector But not the supplier. 6. reviewing suitable packing and stamping all packing lists. 7. Pictures of the materials are requested to be attached to the inspection report. 8. Draft of inspection report shall be sent to us within maximum 48 hours in order to be reviewed/ commented before arranging the shipment. 9. Material shall be packed ready for export in a manner which allows easy handling and prevents damage. 10. Water proof barrier material shall be used for stainless steel materials to protect against chlorine attack by exposure to salt water atmosphere. 11. About the welding non-destructive tests (PT, UT, RT...), supplier must provide the reports for company information and documentation. (These are not held points). 12. No welding near expansion joint shall be performed unless expansion joint belows are protected against weld spatter. 13. Expansion joint shipping rods to be painted with orange color to be removed after equipment installation at site. 14. Spring rate test shall be performed on the expansion joint. 15. Expansion joint is designed to withstand design pressure on one side in combination of zero pressure on the other side. 16. Pressure testing shall be performed as per code. 17. Below seams to be 100%radiographed before forming and 100% die penetrate inspected after forming. All other welded attachments of expansion joint shall be 100%dye penetrate inspected. 18. Below seams to be 100%radiographed before forming and 100% die penetrate inspected. 19. “About the inspection Supplier’s fabrication schedule shall be submitted to company to arrange the TPI and witness on some activities. (These are hold points and the fabrication must followed up after company confirmation.) a- Main raw material inspection (VT and review the original MTC) b- Checking the tensile strength of the PQR specimens. c- Hydrostatic pressure test (internal and external) d- Final inspection (shipping Packing) inspector has to take photos from each section.
Mã dự án: 18413904

Về dự án

5 đề xuất
Hoạt động 5 năm trước
Địa điểm: Ordes, Spain

Bạn muốn kiếm tiền?

Lợi ích khi chào giá trên Freelancer

Thiết lập ngân sách và thời gian
Nhận thanh toán cho công việc
Phác thảo đề xuất của bạn
Miễn phí đăng ký và cháo giá cho công việc
5 freelancer chào giá trung bình €251 EUR cho công việc này
Avatar người dùng
Hello, I would like know more details about this inpection. I'm graphic designer, I'm living in Vigo - España. So about pics, Are you in contact with the material supplier? Does he know the aspects you want to know? The photos would be of the product and packaging? What are the aspects you are looking for?
€155 EUR trong 3 ngày
5,0 (3 nhận xét)
3,8
3,8
Avatar người dùng
Hi: I must warn you though that I'm not a mechanical engineer. I almost majored in civil engineering before I decided to switch. I do have experience in construction and therefore in materials.
€222 EUR trong 3 ngày
0,0 (0 nhận xét)
0,0
0,0
Avatar người dùng
I can do the job today. I was steel structures engineer for years. Not an expert in industrial pieces but I know how steel works are done.
€500 EUR trong 1 ngày
0,0 (0 nhận xét)
0,0
0,0

Về khách hàng

Cờ của FRANCE
Courbevoie, France
5,0
62
Phương thức thanh toán đã xác thực
Thành viên từ thg 1 11, 2018

Xác thực khách hàng

Cảm ơn bạn! Chúng tôi đã gửi email chứa đường link để bạn lấy tín dụng miễn phí.
Đã xảy ra lỗi trong khi gửi email của bạn. Hãy thử lại.
Người Dùng Đã Đăng Ký Tổng Số Việc Đã Đăng
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Đang tải xem trước
Đã cấp quyền truy cập vị trí.
Phiên đăng nhập của bạn đã hết hạn và bạn đã bị đăng xuất. Hãy đăng nhập lại.