Industrial Engineer / Product Development Engineer – Construction Hoarding System

@Ekarthaan

Hi forgetgute, Last week I delivered a similar modular hoarding system to patent‑ready CAD with FEA and DFM, so I’m confident to handle this really well. My Questions. 1) Which standards and performance targets should we certify to (AS 4687 hoardings, AS/NZS 1170.2 wind, crowd/impact), and what are the max panel height and allowable ballast/footprint? 2) What are the manufacturing and logistics constraints: preferred materials/processes, target unit cost, and transport/storage limits (pallet size, module weight, manual handling)? My Suggestions. 1) Use a parametric CAD + FEA workflow to optimise ballast vs anchors by wind region/terrain; this usually trims steel mass 15–25% while keeping safety. 2) Design for flat‑pack nesting with standardized, captive fasteners and a quick‑connect joint to cut install time and lost parts, boosting reliability. My Execution Plan. - Confirm requirements, site scenarios, and compliance path; sign NDA/IP. - Create 2–3 concept options with sketches and layout; select via scorecard. - Build a parametric SolidWorks/Inventor model; define interfaces and BOM. - Run FEA to AS/NZS 1170.2 and AS 4687 (buckling, base, fixings, serviceability); iterate joints and posts. - DFM/DFMA review: material choice (galv. cold‑formed steel + HDPE/Al skins), coatings, weldments, jigs. - Prototype pack: drawings, cut lists, simple install guide; supplier quotes. - Field tests: wind/ballast checks, impact, install time; refine

@xabhix

Hi, I can support your product development with efficient design, process optimization, and manufacturing-ready solutions. With 7+ years of experience, I ensure cost-effective, high-quality, and scalable product outcomes. ✔️ Product design and development (concept to production) ✔️ Process optimization and cost reduction ✔️ CAD modeling and technical documentation ✔️ Prototyping, testing, and design validation ✔️ DFM/DFA and production-ready outputs Portfolio: https://www.freelancer.in/u/xabhix I can start immediately. Could you share product type, development stage, or production requirements? Best regards, Abhishek

@rvwebfreelancing

Hi there, Developing modular hoarding systems requires structural practicality, rapid deployment logic, and scalable fabrication aligned with temporary works and compliance requirements. We can support full product development—from concept refinement to manufacturable CAD, structural considerations, and patent-ready documentation with cost-efficient production strategies. To proceed accurately ✅ Any initial concepts, sketches, or site constraints to review? ✅ Target standards/compliance (Australian Standards specifics)? ✅ Preferred materials or fabrication methods? Check portfolio: www.freelancer.com/u/rvwebfreelancing/mech We will be happy to address any questions and ensure a smooth project process. Ready when you are. Buildtrix Studio

@iamVutuk

Dear Client, Vutuk Design and Media is pleased to submit a proposal for your industrial engineering and product development project. Our firm provides a comprehensive, integrated suite of services that combines precision mechanical design, advanced engineering simulation, and high-end production visuals. We understand that modern product development requires more than just CAD modeling; it requires a data-driven approach to ensure manufacturability and market readiness. To help us align with your project goals, we would like to clarify: Will the project require a full Bill of Materials (BOM) including vendor-sourced hardware and electrical components? Should we include high-fidelity 3D animations to demonstrate the assembly sequence or internal mechanical operations? What is the anticipated production volume, as this will influence our Design for Manufacturing (DFM) strategy? What is your preferred timeline for the delivery of the first production-ready design iteration? We invite you to visit our company profile and portfolio to explore our diverse track record in mechanical product design and industrial visualization. We look forward to discussing how Vutuk Design and Media can bring your product to life. Best regards, The Vutuk Design and Media Team

@wick63807

I have been using PTC/Creo for product design since 2008. If you don't mind the software, I am available to assist you with the following: developing and refining product concepts and design ideas; assisting with industrial/product engineering of modular fencing systems; drawing initial concept sketches and engineering layouts; developing manufacturable and scalable designs; reviewing structural practicality, assembly methods, and transportation/storage efficiency; considering wind loads, temporary engineering requirements, and compliance pathways; assisting with material selection and manufacturing methods; developing concepts suitable for patent applications and intellectual property protection; advising on prototyping and commercial production strategies; and providing timely CAD files (DWG or DXF format) and printable PDF files, completing tasks within the stipulated timeframe. I would greatly appreciate it if you could contact me.

@DAOMANHTUNG

Hi, Experienced with modular construction systems, CAD detailing, and fabrication-oriented design. I recently completed similar modular/mechanical projects with 5-star reviews. Portfolio & Reviews: https://www.freelancer.com/u/DAOMANHTUNG?review_context_id=40340848&review_type=project&frm=DAOMANHTUNG&sb=t https://www.freelancer.com/u/DAOMANHTUNG?review_context_id=40353257&review_type=project&frm=DAOMANHTUNG&sb=t Ready to discuss concept development, CAD modeling, and manufacturable solutions. Best regards, Camo

@shubhamkumawat69

Hello, I’m a Mechanical Design Engineer with 4+ years of experience in SolidWorks and manufacturing-focused CAD design. I have worked on similar projects, delivering accurate, production-ready models aligned with DFM and real-world applications. With over 75% of repeat hiring rate on this plateform. My expertise includes 3D CAD modeling, sheet metal, reverse engineering, and fabrication drawings. I ensure clean geometry, proper tolerances, and manufacturable designs. I will deliver precise CAD models along with all required files for production. Portfolio: https://www.freelancer.com/u/shubhamkumawat69 Let’s discuss your requirements and get started.

@ssumitkumar7800

As an experienced 3D artist, graphic designer, and web designer with an extensive background in structural engineering, I believe I have a unique set of skills to offer for this project. My knowledge of 2D and 3D modeling and rendering can greatly aid in the development and refinement of your modular construction hoarding system design, as well as in providing accurate conceptual sketches and engineering layouts. Moreover, my proficiency in software such as SolidWorks and AutoCAD aligns perfectly with your preference. I’ve worked with these tools extensively throughout my career to create intricate designs and perform finite element analysis, which will prove to be valuable for your project. In addition, my experience in the manufacturing and fabrication processes can be utilized efficiently to come up with optimized manufacturable designs.