
In Progress
Posted
Paid on delivery
I want to take my Victron-based PV installation to the next level by driving everything through Node-RED on Venus OS Large, hosted on a Raspberry Pi. The hardware stack includes the Victron system itself, a Seplos battery pack and a heat pump. Your job is to build, test and document a set of Node-RED flows that bring the whole setup into a single, smart, fully automated loop. What I need automated • Battery management, heat-pump control and overall energy monitoring, all visible in one dashboard. Battery-side features • Charge/discharge scheduling aligned with tariffs or solar production • State-of-charge monitoring presented in real time • Peskshaving logic that caps grid draw during peaks Heat-pump controls • Precise temperature regulation • Automatic heating/cooling mode switching • Energy usage tracking • Energy regulation and optimised usage based on available solar or battery reserve Key technical notes • Environment: Venus OS Large, Raspberry Pi, Victron dbus, MQTT and Modbus where relevant • All flows should survive reboots and be clearly labelled so I can tweak them later. • Any scripting or custom nodes must be provided with clear comments. • A short read-me explaining installation and backup/restore steps is essential. Success criteria 1. Flows import cleanly and show no Node-RED errors. 2. Battery, inverter and heat-pump metrics appear in the dashboard within 5 seconds of refresh. 3. Automated actions (charge scheduling, mode switching, peak-shaving cut-off) trigger reliably in a live test spanning at least one full solar day. Once everything runs smoothly, please hand over the final flows, documentation and a quick video or screenshot walk-through so I can confirm the result.
Project ID: 40777142
127 proposals
Remote project
Active 6 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
127 freelancers are bidding on average €152 EUR for this job

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience with energy monitoring and automation, connecting equipment through MQTT and Modbus and developing reliable Node-RED controls. I can bring your Victron system, Seplos battery and heat pump into one dashboard on Venus OS Large, with tariff-aware battery scheduling, solar optimisation, peak shaving and temperature-based heating/cooling control. I would coordinate heat-pump demand with available PV and battery reserve, including sensible SOC limits and manual overrides. I will make the flows survive reboots, keep settings easy to adjust and verify that battery, inverter and heat-pump metrics appear within five seconds of refresh. I will test the automated actions on your installation over at least one full solar day. I will hand over clearly labelled, commented flows, a short installation and backup/restore guide, and a video or screenshot walkthrough. Which heat-pump model and control interface do you have, and is the Seplos BMS already reporting correctly in Venus OS? I would also need remote access for integration and live testing. Please contact me to discuss details.
€250 EUR in 10 days
7.6
7.6

This automation should not rely on dashboard logic alone. I will separate monitoring, decision-making and device control, with hysteresis, command validation, manual override and safe fallbacks so tariff changes, stale data or a reboot cannot cause rapid switching or unsafe battery operation. I will map Victron dbus/MQTT, Seplos BMS and heat-pump registers; normalize telemetry; then build labelled subflows for SoC-aware scheduling, solar-surplus control, peak shaving, temperature/mode regulation and energy accounting. Persistent context and startup checks will restore operation after reboot. The dashboard will expose live values, targets, operating states, overrides and alarms. I will validate imports, metric refresh, disconnect recovery and all automated actions, followed by a full-solar-day live test. Handover includes exportable flows, commented custom code, node dependencies, configuration guide, backup/restore README and a video or screenshot walkthrough. I have a few questions: Q1. What are the exact Seplos BMS and heat-pump models, and which interfaces/register maps are available? Q2. Which tariff source should drive scheduling, and what grid-import limit and battery reserve must be enforced? To begin, I need remote access to Venus OS/Node-RED, current MQTT/dbus details, device documentation and a backup of the existing configuration.
€100 EUR in 5 days
7.1
7.1

Hi, I can build a clear Node-RED automation setup for your Victron PV installation on Venus OS Large, bringing battery management, heat-pump control and energy monitoring into one dashboard. My approach would cover: Victron DBus/MQTT data collection → real-time dashboard metrics → tariff/solar-aware battery scheduling → peak-shaving controls → heat-pump temperature and mode automation → energy-use tracking and optimisation. I have hands-on experience integrating Victron Cerobox APIs into a central monitoring platform, including custom pollers, Python checks, device onboarding, threshold tuning, dashboards and operational documentation. I can apply the same structured monitoring and automation approach to your Raspberry Pi/Venus OS environment. The flows will be clearly labelled, reboot-safe, and designed for easy adjustment. I will include sensible safeguards around control actions, logging, error handling, status visibility, and configurable thresholds for SOC, grid draw, temperature and solar/battery reserve. Deliverables will include importable Node-RED flows, any required scripts/custom-node configuration with comments, dashboard setup, README installation instructions, backup/restore guidance, and screenshots or a walkthrough of the completed setup. Before starting, I’d like to review the available Victron DBus/MQTT topics, Seplos battery interface, heat-pump protocol, and your preferred tariff/peak-shaving rules. Best regards, Teo
€140 EUR in 7 days
6.9
6.9

Proposed Solution: I suggest leveraging Node-RED on Venus OS Large, hosted on a Raspberry Pi, to integrate Victron, Seplos battery pack, and heat pump functionalities for your PV installation. Solution Components: Create Node-RED flows for efficient battery management, heat-pump control, and energy monitoring. Develop a dashboard for enhanced visibility and control. Features: Optimize battery charge/discharge scheduling, real-time state-of-charge monitoring, and peak-shaving logic for grid draw optimization. Implement precise heat-pump controls, mode switching, energy tracking, and solar/battery optimization. Integration: Utilize Venus OS Large, Raspberry Pi, Victron dbus, MQTT, and Modbus for seamless integration with specified components. Testing: Rigorous testing for error-free import, real-time dashboard updates within 5 seconds, and reliable automation triggering over a full solar day. Delivery: Receive finalized Node-RED flows, detailed documentation, and a walkthrough video for validation. Objective: Establish a long-term partnership focused on innovation, reliability, and continuous improvement to meet evolving needs.
€225 EUR in 5 days
6.0
6.0

Keep Victron’s BMS limits authoritative and use Node-RED on Venus OS Large to adjust ESS targets—not compete with battery protection. Check the heat pump’s control interface first; Modbus access could avoid extra hardware. I’ll build tariff/solar scheduling, peak shaving and temperature/mode control with solar/SoC reserve limits. A shared dashboard will show battery, inverter and heat-pump metrics and energy use, targeting updates within 5 seconds. Controls will include compressor cycling protection and stale-data safeguards; all I need is remote access to the Pi. In 4 days, I’ll deliver labelled, commented, reboot-safe flows, an installation/backup README and screenshot walkthrough, with clean-import checks and a full solar-day live test covering the automated triggers. What make and model is your heat pump? Sid Techno LLC
€250 EUR in 4 days
6.2
6.2

Your Seplos BMS will flood the dbus with state-of-charge updates every second, but if your Node-RED flows poll that data synchronously without rate-limiting, you'll lock up the Venus OS event loop during peak solar transitions. That creates a 10-15 second dashboard freeze exactly when you need real-time visibility. Quick questions - are you running Venus OS Large v3.0+ with the expanded dbus API, or an older build that requires manual Modbus register mapping? And what's your target peak-shaving threshold in kW before the system should cut grid draw and shift to battery? Here's the architectural approach: - MQTT + DBUS INTEGRATION: Subscribe to Victron dbus topics asynchronously using mqtt-in nodes with QoS 1, then debounce high-frequency BMS updates to 2-second intervals so the dashboard stays responsive under load. - HEAT PUMP AUTOMATION: Inject a function node that reads solar surplus from the PV inverter feed, compares it against a configurable reserve threshold, then sends Modbus commands to toggle heating/cooling modes only when battery SOC exceeds your floor limit. - DASHBOARD PERSISTENCE: Store all flow variables in context using file-based storage so charge schedules and peak-shaving rules survive reboots, and label every subflow with inline comments explaining the dbus path and Modbus register it controls. I've built similar energy-management systems for 2 off-grid installations that balanced solar, battery and HVAC loads across 18-month deployments without manual intervention. Let's schedule a 15-minute call to confirm your dbus topic structure and Modbus register map before I wire the flows.
€130 EUR in 3 days
7.0
7.0

Hi, I can build and test a reliable Node-RED automation system on Victron Venus OS Large, integrating your Victron setup, Seplos battery, and heat pump. The main challenge is ensuring reliable communication between all devices while optimizing energy usage, peak shaving, and temperature control safely. I’ll deliver clearly labelled flows, a unified dashboard, reboot recovery, documentation, and testing results. I’ll first verify hardware compatibility and control interfaces to ensure everything works as expected.
€150 EUR in 2 days
6.1
6.1

Hi there, I see that you want to enhance your Victron PV setup by integrating it with Node-RED on a Raspberry Pi. The goal is to create a seamless automation system that manages your battery, heat pump, and overall energy monitoring in one dashboard. With my 4+ years of experience in automation and working with platforms like Node-RED, I can build and test flows tailored to your specific needs, ensuring they are user-friendly and well-documented. My approach would involve setting up the necessary Node-RED flows for battery management and heat pump control, ensuring they respond quickly and accurately. I’ll make sure everything is clearly labeled for your future adjustments and provide a straightforward read-me for installation and backup procedures. Just to clarify, how do you envision the dashboard interface? Would you prefer specific visualizations or data representations? Best regards, Arslan Shahid
€30 EUR in 3 days
5.3
5.3

I would love to work with you on designing and building your Victron Node-RED automation, pulling your Seplos battery pack, heat pump and inverter into one smart, fully automated loop on Venus OS Large. We start by mapping your setup together, so I understand exactly which dbus paths and MQTT topics your Raspberry Pi is exposing, how your Seplos pack reports state of charge, and what interface your heat pump offers for control. This upfront session saves rework and means the flows I build are tailored precisely to your hardware, not a generic template. Then I design the full flow architecture for your review before anything goes into Node-RED. You will see how battery charge and discharge scheduling connects to your tariff windows and solar production, how the peak-shaving logic reads live grid draw and triggers the cut-off at your chosen threshold, and how the heat pump flows read available solar and battery reserve to decide heating or cooling mode automatically. The build itself runs on Venus OS Large with Victron dbus integration for inverter and battery metrics, MQTT where your devices publish telemetry, and Modbus where needed for the Seplos pack. I wire up a Node-RED dashboard showing battery state of charge, inverter output, heat pump status and energy totals in real time, all refreshing well inside five seconds. Each flow is clearly labelled so you can open it later and know what it does, and every custom function node carries comments explaining the logic behind it. Testing covers a full solar day so we can watch charge scheduling fire at the right tariff windows, verify the peak-shaving cut-off triggers when grid draw crosses the limit, and confirm the heat pump switches modes as solar availability shifts. Once everything behaves exactly as you described I hand over the exported flows, a plain-English README covering installation, backup and restore steps, and a short video walkthrough so you can confirm every part of the result before releasing payment. Payments are milestones released after each stage once you are happy with what you see. Your installation ends up with flows that survive reboots, a dashboard readable at a glance, automation that responds to real conditions rather than fixed timers, and documentation clean enough to hand to anyone who needs to maintain it later. 17+ years and 4,100+ projects, with automation and IoT work across Raspberry Pi, MQTT and energy systems. Please message me here so we can discuss your project further. Waiting for your kind response. Cheers! Salma N.
€250 EUR in 30 days
4.9
4.9

I’ve helped automate energy systems with Victron gear and Node-RED before, integrating battery management and heat pumps into a single dashboard. Your goal to unify everything and run it smoothly on Venus OS Large makes sense and is definitely doable. I’ll start by mapping your exact hardware interfaces—confirming MQTT and Modbus nodes are correctly connected to Venus OS and the Seplos battery. For charge scheduling, do you prefer fixed daily tariffs or dynamic pricing inputs? That’ll help tailor the scheduling logic. I’ll build flows that handle state-of-charge tracking, peak shaving based on grid draw, and heat-pump control with automatic mode switching, making real-time data visible in a clean dashboard. Each flow will have clear labels and comments, survive reboots, and fit into a simple backup workflow. I’ll also prepare a concise read-me and a quick video walk-through to get you comfortable managing and tweaking the system later. Ready to set this up and test it through a full solar day cycle so you get consistent, automated control right away.
€30 EUR in 7 days
4.7
4.7

Node-RED driving the whole Victron setup is the right call, way more flexible than the stock dashboards. I would hook in over MQTT via the Venus OS broker, pull battery, grid, and PV data, then build the automation flows for load shifting and alerts straight in Node-RED. Can start today, working flow within 3 days. Budget and timeline here are rough, based on the post. Once we go over your actual hardware setup and what triggers you want, I will firm both up. Want me to send a quick plan first?
€150 EUR in 7 days
4.5
4.5

Hi, Adelman here from Texas VICTRON NODE-RED ENERGY AUTOMATION - you need battery, solar, and heat-pump controls working together reliably without risking system stability. I’d connect Victron data through dbus and MQTT, then build clearly labelled flows for state-of-charge monitoring, tariff-based scheduling, and peak shaving. I’d add safety limits and fallback behavior so heat-pump or battery actions cannot run on stale readings, then test persistence across reboots. How does your heat pump accept control commands today, through Modbus, MQTT, or a separate controller? Looking forward to work with you.
€140 EUR in 7 days
4.2
4.2

Hi there, Your Victron PV installation needs reliable Node-RED orchestration across Venus OS Large, the Seplos battery, tariff-aware energy decisions, and heat-pump control without losing state after reboots. I have strong hands-on experience with Node.js, Electronics, and Programming and have solved similar problems involving MQTT/Modbus device integration and resilient energy automation. My approach would be to: * Review the existing Victron dbus, MQTT, Modbus, Raspberry Pi, and Venus OS setup. * Identify the root cause and determine what can be reused versus what needs to be changed. * Implement clearly labelled, maintainable Node-RED flows for SOC scheduling, peak-shaving, heat-pump modes, dashboards, and solar/battery reserve logic, with any C Programming components carefully documented. * Test edge cases, reliability, performance, security, and integration behavior across reboots and a complete solar-day scenario. * Deploy or integrate the fix without disrupting the existing system, then provide backup/restore documentation and a concise walkthrough. The five-second dashboard target will require efficient event-driven updates rather than repeated polling, while control thresholds should include hysteresis to prevent rapid switching. I prefer fixing the actual root cause rather than applying temporary patches, and I will keep the implementation simple, stable, and maintainable. I can start by reviewing the current flows, dbus services, MQTT topics, Modbus mappings
€356 EUR in 14 days
4.4
4.4

IF YOU ARE NOT HAPPY YOU DON'T PAY! On Venus OS Large your flows sit in /data and survive reboots. The bigger risk is fighting the ESS control loop: if Node-RED keeps pushing grid setpoints while ESS scheduled charging is also active, the two overwrite each other and peak-shaving looks unreliable. I'd run charge windows and peak-shaving through the ESS dbus paths (scheduled charge slots, grid setpoint, import limit) rather than around them. Before building on it, I'd check that the Seplos really reports SoC on dbus. You'd get labelled flows, commented function nodes, one dashboard for battery, inverter and heat pump, and a read-me covering install and backup/restore, all tested over a full solar day. How is the heat pump controlled today: Modbus TCP, an SG-Ready relay or a vendor cloud API? Send me a message and I'll explain exactly how I'd approach your project.
€223 EUR in 5 days
3.9
3.9

Hi, our team has experience with Node-RED, MQTT, API integrations, and automation workflows. We can help integrate your Victron system, Seplos battery, and heat pump into a unified dashboard with energy monitoring, charge scheduling, peak shaving, and solar-aware heating control. We will focus on reliable operation after reboots, clearly labelled flows, testing, and installation and backup documentation. Could you share the heat-pump model and its available control interface, along with how you currently access your electricity tariff data?
€140 EUR in 7 days
4.1
4.1

**Available today to build your Victron Node-RED automation on Venus OS Large** I am Anand and I build Node-RED automation for Victron systems using dbus MQTT and Modbus so I can deliver this as one clean automated setup. Recent work: a Victron ESS flow with tariff based charge scheduling and live SOC dashboard plus a heat pump control flow using solar surplus to reduce grid usage. For battery management I will add charge/discharge scheduling based on tariffs and solar production real time state-of-charge monitoring and peakshaving logic that caps grid draw during peaks. For the heat pump I will add precise temperature regulation automatic heating and cooling mode switching energy usage tracking and energy regulation based on available solar and battery reserve. For monitoring I will bring battery inverter and heat pump metrics into one dashboard designed to refresh within 5 seconds. All flows will be built for Venus OS Large on Raspberry Pi clearly labelled to survive reboots and easy for you to tweak later with comments on any scripting or custom nodes. I will test that flows import cleanly with no Node-RED errors and that charge scheduling mode switching and peak-shaving trigger reliably over one full solar day live test. Handover will include final flows a short readme covering installation and backup/restore and a video or screenshot walk-through. Can you share your Victron model Seplos BMS details and heat pump brand so I can confirm the exact nodes and registers before starting
€140 EUR in 7 days
3.8
3.8

Hi, -Pure Code- here, from Saudi Arabia. Building your Victron PV automation with Node-RED with energy usage tracking comes down to one thing: a device that behaves the same in the field as on the bench. I'm a senior embedded and electronics engineer with 8+ years of experience working with Raspberry Pi, C Programming, Node.js and Electronics. With Node, the real challenge is timing, power and real conditions. A common issue: testing only on the bench, so problems appear once the device runs in real conditions. My plan: first, review the schematic, pin map and timing requirements. Then, write the firmware in small modules, each tested on the board. Finally, test on the real hardware under load, power loss and bad signal. I'd start with the core firmware features as phase one. I've done firmware work in Raspberry Pi. A few questions to better understand the scope: 1. Should firmware update over the air? That needs a safe bootloader planned from the start. 2. Use the vendor HAL except where timing is tight? I'd recommend it, it's easier to change later. 3. Is this heading to production after the prototype? Then parts and code stay ready for production. I can start right away. Happy to go over the details here in chat and suggest the best approach. Looking forward to hearing from you, -Pure Code-
€200 EUR in 2 days
3.9
3.9

cHello, The item that will decide whether this survives a reboot is the Seplos battery. Victron's own nodes read dbus, but the Seplos speaks Modbus RTU over RS485 at 19200 8N1 — it doesn't answer the old ASCII protocol, and that silence looks like a dead pack . So the battery side needs a proper Modbus read path, not a dbus lookup. My approach: Victron data through the official node-red-contrib-victron nodes over dbus . Seplos via node-red-contrib-modbus reading input registers — pack voltage at 0x1000, current at 0x1001, SOC at 0x1005, and the cell voltages from 0x1100 onward . Heat pump depends on what it is: if it's Modbus TCP, a getter node works; if it's a manufacturer API, that's the piece to confirm first. Peak-shaving logic I'd write as a function node with a clear threshold, not buried in a switch, so you can tune it later. Two things I need before starting: what make/model is the heat pump, and does it expose Modbus? That single answer decides whether the automation loop is achievable at all. Is the Seplos already wired to the Pi, or does that RS485 adapter still need setting up? Looking forward to working with you. Ankit
€140 EUR in 2 days
3.9
3.9

Hello there , Good evening! I’ve carefully checked your requirements and really interested in this job. I’m full stack node.js developer working at large-scale apps as a lead developer with U.S. and European teams. I’m offering best quality and highest performance at lowest price. I can complete your project on time and your will experience great satisfaction with me. I’m well versed in React/Redux, Angular JS, Node JS, Ruby on Rails, html/css as well as javascript and jquery. I have rich experienced in Node.js, Arduino, Microcontroller, Electronics, C Programming, Raspberry Pi, MQTT and Automation. For more information about me, please refer to my portfolios. I’m ready to discuss your project and start immediately. Looking forward to hearing you back and discussing all details.. Thank you for your attention
€155 EUR in 6 days
3.8
3.8

Dear Sebastian, I am confident in delivering a robust Node-RED automation system integrating your Victron PV installation with the Seplos battery pack and heat pump on Venus OS Large hosted via Raspberry Pi. Leveraging my expertise in Node.js, MQTT, and Raspberry Pi environments, I will develop well-structured, clearly labeled Node-RED flows featuring fault-tolerant automation for battery management, heat-pump control, and energy monitoring consolidated into a unified dashboard. My implementation will ensure real-time state-of-charge visualization and intelligent charge/discharge scheduling aligned with tariff and solar profiles. Peak-shaving controls will cap grid draw during high-demand periods. Heat-pump automation will precisely regulate temperature, auto-switch heating/cooling modes, monitor energy usage, and optimize consumption based on solar availability and battery reserves. The solution will use Victron dbus, MQTT, and Modbus interfaces and include comprehensive code comments, restart resilience, and detailed documentation with installation and recovery instructions. Upon completion, I will provide the final flows, documentation, and a concise video walkthrough to confirm seamless operation and reliability throughout a full solar day test. I look forward to collaborating to elevate your PV system to a fully autonomous, intelligent energy management platform. Best regards, Paul Edward
€140 EUR in 7 days
3.8
3.8

Ried im Innkreis, Austria
Payment method verified
Member since Jul 20, 2025
$250-750 USD
$250-750 USD
$30-250 USD
$3000-5000 USD
$30-250 USD
$10-30 USD
$15-25 USD / hour
$30-250 USD
₹12500-37500 INR
₹1500-12500 INR
$250-750 USD
$250-750 USD
$15-25 USD / hour
$1500-3000 USD
$30-250 USD
₹750-1250 INR / hour
₹1500-12500 INR
€30-250 EUR
$15-25 AUD / hour
₹600-1500 INR