gPROMS Reactor Gas Cooling Simulation

£20-250 GBP

Đã đóng

Đã đăng vào 20 ngày trước

£20-250 GBP

Thanh toán khi bàn giao

1. Project Overview The objective is to develop a robust process simulation model using Siemens gPROMS to simulate the cooling of reactor exit gas from a methane conversion process. The simulation must model the cooling of the gas stream from an inlet temperature of 1200°C to a target outlet temperature of 500°C under Normal operating conditions. 2. Gas Stream Contents (Normal Condition) The model shall be based on the "Gas Outlet" stream resulting from a 18.000 kg/hr Methane feed. The specific composition to be modelled is as follows: Reactor Outlet Stream Composition (Normal Condition) Component Molecular Weight Mass Flow (kg/hr) Molar Flow (kmol/hr) Methane (CH4) 16 4.140 0.259 Hydrogen (H2) 2 3.378 1.689 Acetylene (C2H2) 26 0.225 0.009 Propane (C3H8) 44 0.381 0.009 Carbon (Solid) 12 9.875 0.823 Total -- 18.000 2.788 3. Scope of Work The supplier is required to: • Develop a steady-state or dynamic (as applicable) heat exchanger model within the Siemens gPROMS environment. • Configure the model to accurately reflect the thermodynamic behaviour of the gas mixture at high temperatures (up to 1200°C). • Perform the simulation to achieve the specified cooling profile. 4. Deliverables The successful supplier must provide the following: • GProms Process Flowsheet: A clear diagram showing the cooling stage and relevant process boundaries. • Technical Report: A comprehensive document containing: o Heat exchanger performance data (e.g., heat duty, etc.). o A summary of physical properties for every stream (inlet and outlet). • Native File: The original, functional Siemens gPROMS file used for the simulation. 5. Timeline and Proposal Requirements • Completion Date: This work must be completed and all deliverables submitted within two weeks of the project award. • Proposal Content: The supplier must stipulate the following in their response: o The total number of man-hours estimated to complete the work. o The overall fixed cost for the project. I will regard the task as complete once the model runs without errors, reproduces the sample output, and the documentation has been provided

Mã dự án: 40322425

Về dự án

7 đề xuất

Dự án từ xa

Hoạt động 20 ngày trước

Bạn muốn kiếm tiền?

Địa chỉ email

Lợi ích khi chào giá trên Freelancer

Thiết lập ngân sách và thời gian

Nhận thanh toán cho công việc

Phác thảo đề xuất của bạn

Miễn phí đăng ký và cháo giá cho công việc

7 freelancer chào giá trung bình £263 GBP cho công việc này

@Feriver

Hello, I understand you need a robust Siemens gPROMS model to simulate the cooling of a methane conversion reactor exit gas from 1200°C to 500°C. I will develop a steady-state heat exchanger simulation reflecting the thermodynamic behavior of your gas mixture, including CH4, H2, C2H2, C3H8, and solid carbon, ensuring accurate heat transfer and cooling profiles under normal operating conditions. Deliverables will include a gPROMS process flowsheet showing the cooling stage, a technical report detailing heat exchanger performance and stream properties, and the native functional gPROMS file. The model will run error-free, reproduce sample outputs, and be fully documented for your review. Thanks, Asif

£250 GBP trong 3 ngày

5,0

(5 nhận xét)

5,4

@hayat38402

Hi, how are you doing? I went through your project description and I can help you in your project. I am a professional CHEMICAL ENGINEER with strong experience in handling projects across multiple domains of chemical engineering. I have extensive expertise in Aspen Plus and Aspen HYSYS, which allows me to develop accurate process simulations, perform sensitivity analyses, optimize operating conditions, and design efficient process flowsheets for various chemical and petrochemical systems. I have successfully completed 1000+ Projects for multiple regular clients all over the world. My areas of expertise include:  Process simulation and modeling (Aspen Plus / Aspen HYSYS)  Mass and energy balance calculations  Process design and optimization  Thermodynamics and reaction engineering  Heat exchanger and separation process analysis  Distillation, absorption, and extraction processes  Chemical process report writing and technical documentation We have good command over REPORT WRITING, we can show you many samples of our previous reports. Let’s discuss further details in the message box.

£135 GBP trong 7 ngày

4,4

(38 nhận xét)

5,5

@Zawiya3

With my multidisciplinary expertise and extensive experience in software development, data science, full-stack engineering, and electronics engineering, I am uniquely positioned to address the complex requirements of your gPROMS reactor gas cooling simulation project. I have a strong grasp of thermodynamics and have previously delivered successful projects involving heat exchangers and pressure systems. With this solid foundation, I can confidently develop a robust Siemens gPROMS model that accurately reflects the unique thermodynamic behavior of your gas mixture at high temperatures. I am familiar with Python, a language widely used in data preprocessing, analysis, and advanced modeling for which I have profound skills for efficient web scraping tasks. Moreover, as an AWS Certified Solution Architect, I can leverage cloud architectures with ease to improve simulations' performance. This is important given the nature of your task requiring precise cooling profiles from an inlet temperature of 1200°C to a target outlet temperature of 500°C under Normal operating conditions.

£150 GBP trong 3 ngày

5,0

(1 nhận xét)

3,8

@HiraMahmood4072

I have over 10+ years of experience Chemical engineering. Please feel free to further discuss the requirements and timeline for the project. I'd be happy to assist you. I am ready to start right now. You can visit my Profile https://www.freelancer.com/u/HiraMahmood4072 Thank you

£120 GBP trong 1 ngày

0,0

(0 nhận xét)

0,0

@yassersammad1

Hello I'll deliver this project before 1 st April, you can expect a Zip with all needed features, I would appreciate if 80% will be released two days before the Milestone Completion, so you can have time to quickly review your deliverables, and implement revisions before the final payment.

£135 GBP trong 7 ngày