Comprehensive ANSYS Multi-Physics Simulations -- 2

₹1500-12500 INR

Đang triển khai

Đã đăng vào 4 ngày trước

₹1500-12500 INR

Thanh toán khi bàn giao

I need a single engineer who can run an integrated set of ANSYS studies for the same copper busbar assembly, covering electrical, thermal, weld-zone, and fault/runaway behaviour. Electrical domain First, solve the steady-state current flow. I want current distribution, voltage drop and total resistance mapped, then dive deeper into I²R power loss and the location/size of any high-resistance zones. The geometry, material properties and boundary conditions will come from my CAD model and test data; you will import them, set up the Maxwell or HFSS environment as appropriate, and provide both the field plots and the raw result files for post-processing. Thermal domain Using the losses calculated above, predict the transient and steady-state temperature distribution. I need maximum temperature values, hotspot coordinates, a temperature-rise-vs-time curve and commentary on overall heat-dissipation performance. Coupled electro-thermal analysis inside ANSYS Workbench is preferred so mesh and loads stay consistent. Weld zone modelling During TIG welding of two segments, capture the moving heat source, generate the temperature profile, delineate the Heat-Affected Zone, estimate weld penetration depth and compute residual stresses. The goal is to correlate the simulated HAZ with micro-section images I will supply, and flag any stress concentrations that could compromise weld quality. Thermal runaway / fault scenario Finally, drive the model into an over-current short-circuit event. Report peak temperature, time-to-failure, runaway propagation path and predicted busbar melting/fuse behaviour. Include the short-circuit current waveform used as load input. Deliverables • ANSYS project files for each physics setup, fully solved • High-resolution plots (PNG + native ANSYS reports) for every metric listed above • A concise memo summarising methodology, key assumptions, mesh independence check and results interpretation Acceptance criteria Results must converge within 5 % of the supplied benchmark measurements; mesh sensitivity documented; and every item in the deliverables list submitted in an organised folder structure. If you have completed coupled electro-thermal or weld simulations in ANSYS before, please mention them when you send your proposal together with an expected turnaround time.

Project Management

Engineering

Mechanical Engineering

Electrical Engineering

Finite Element Analysis

Mã dự án: 40351308

Về dự án

5 đề xuất

Dự án từ xa

Hoạt động 3 ngày trước

Bạn muốn kiếm tiền?

Địa chỉ email

Lợi ích khi chào giá trên Freelancer

Thiết lập ngân sách và thời gian

Nhận thanh toán cho công việc

Phác thảo đề xuất của bạn

Miễn phí đăng ký và cháo giá cho công việc

Đã trao cho:

@Bhartifreelancer

Hello, I can proficiently solve steady-state current flow problems using Maxwell or HFSS. I assure you accurate mapping of current distribution, voltage drop, and total resistance. Additionally, I can thoroughly analyze I²R power losses within your specified geometries and promptly locate any high-resistance zones. With a meticulous approach to data importation, boundary conditions setting-up, continuous monitoring of field plots, complemented by raw result files for post-processing would be guaranteed. With regards to Thermal Zone Management;from transient to steady-state temperature predictions down to estimating maximum temperature values and hotspot coordinates up to temperature-rise-vs-time curve analysis and commentary on overall heat-dissipation performance are all within my scope of expertise in coupled electro-thermal analyses with ANSYS Workbench. Best regards Bharti

₹9.500 INR trong 3 ngày

5,0

(21 nhận xét)

4,3

5 freelancer chào giá trung bình ₹12.800 INR cho công việc này

@Is88

I am an experienced engineer specializing in ANSYS simulations, offering advanced computational modeling and analysis services to support design validation, optimization, and failure prevention. Using ANSYS Workbench, Mechanical, and Fluent, I can deliver accurate results through structural, thermal, and fluid flow studies, vibration analysis, and failure prediction. Specialized in; 1) 3D model setup and meshing in ANSYS 2) Static structural and thermal analysis 3) CFD simulation for fluid flow and heat transfer 4) Modal and harmonic vibration analysis 5) Fatigue and failure evaluation 6) Optimization and design improvement recommendations 7) Comprehensive technical report with results and conclusions

₹7.000 INR trong 3 ngày

4,9

(95 nhận xét)

6,3

@mohjib092

As an electrical engineer with over a decade of experience, I assure you that your ANSYS project is in safe hands. I have successfully executed numerous studies requiring multi-physics simulations, including tasks similar to the comprehensive work you've outlined. For instance, I've accurately mapped current distribution, voltage drops, and power losses in previous projects, and your requirements will receive the same level of attention and precision. Furthermore, I've proven my ability to deliver within tight deadlines without compromising quality; an aspect that's crucial for your project. One of my specialties is coupled electro-thermal analysis - a skill highly relevant to your task as it maintains the consistency of mesh and loads. Combined with my experience in weld zone modeling, I can ensure an accurate representation of real-life scenarios. This particular proficiency has played a key role in identifying stress concentrations potentially impacting weld quality and correlating simulated HAZ with micro-section images.

₹28.000 INR trong 2 ngày

4,8

(4 nhận xét)

3,7

@maaz0007

Hello, I hope you are doing well. I am a Mechanical Engineer (PEC Registered) offering freelance CAD and product design services. I have hands-on experience in mechanical design, product development, and manufacturing-focused design, with strong proficiency in SolidWorks and working knowledge of AutoCAD, Fusion 360, and ANSYS (FEA/CFD). I work on projects ranging from concept development to production-ready designs, including 3D modeling, assemblies, technical drawings, and BOMs. My experience also includes designing for manufacturability across 3D printing, sheet metal, and CNC processes, along with client-focused collaboration and timely delivery. If you have a project or design requirement, I’d be happy to discuss how I can support you. Best regards, Muhammad Hammad Tariq

₹7.000 INR trong 7 ngày

5,0

(8 nhận xét)

2,9

@letswork92

Hello! I understand that you're seeking an experienced engineer to conduct a comprehensive set of ANSYS multi-physics simulations for your copper busbar assembly. Accurate modeling across electrical, thermal, weld-zone, and fault scenarios is crucial for ensuring optimal performance and reliability. With over 12 years of experience in engineering simulations, I have successfully completed coupled electro-thermal analyses using ANSYS Workbench. My approach will ensure that the steady-state current flow and subsequent thermal behaviors are accurately captured, yielding precise temperature distributions and heat dissipation insights. I’ll meticulously handle the weld zone modeling to correlate with your micro-section images and assess any stress concentrations effectively. Additionally, the simulation of thermal runaway scenarios will be executed with precision to predict critical failure points. Could you please provide more details on the benchmark measurements you would like me to use for validation? Looking forward to potentially collaborating on this project!

₹12.500 INR trong 7 ngày