Đang Thực Hiện

Setting diff classes on a single nic dot1q linux

Hi All,

This is a Network setup that requires knowledge and understanding of [url removed, login to view] .

I have a Linux box that is connected to a Cisco switch.

I need to add multiple classes on a single NIC on the linux box.

I'm almost done with the setup, but I'm having a difficult time finishing it.

I can ping the additional classes on the linux box from OTHER boxes, that reside on SAME class.

But, if you ping the server from a different class, it is not pingable.

This is due probabaly to routing/gateway/reverse-routing or something like that.

That's where I need you assistance.

Here is my configuration:

The setup in the Cisco switch is:

3550-FW#show interfaces trunk

Port Mode Encapsulation Status Native vlan

Fa0/3 on [url removed, login to view] trunking 1

Fa0/46 on [url removed, login to view] trunking 1

Port Vlans allowed on trunk

Fa0/3 100,400

Fa0/46 100,200,400

Port Vlans allowed and active in management domain

Fa0/3 100,400

Fa0/46 100,200,400

Port Vlans in spanning tree forwarding state and not pruned

Fa0/3 100,400

Fa0/46 100,200,400

In my setup, we are going to use interface fa0/3 (fa0/46 is working with ESXi 4.1 and works well).

My server (Linux - CentOS) has a one network interface with the following IP setup:

[url removed, login to view]

[url removed, login to view]

[url removed, login to view]

netwmask: [url removed, login to view]

gateway: 6.9.141.1

I need to ADD another class on this NIC:

[url removed, login to view]

[url removed, login to view]

[url removed, login to view]

netwmask: [url removed, login to view]

gateway: 12.10.22.1

Here are the setup of the files:

/etc/sysconfig/network-scripts # less ifcfg-eth0

# Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet

DEVICE=eth0

# BOOTPROTO=none

# BROADCAST=[url removed, login to view]

HWADDR=00:0b:cd:ce:3e:b5

ONBOOT=yes

ETHTOOL_OPTS="speed 100 duplex full autoneg off"

# NETMASK=[url removed, login to view]

# IPADDR=[url removed, login to view]

# GATEWAY=6.9.141.1

# TYPE=Ethernet

/etc/sysconfig/network-scripts # less [url removed, login to view]

# Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet

DEVICE=[url removed, login to view]

VLAN=yes

BOOTPROTO=static

ONBOOT=yes

NETMASK=[url removed, login to view]

IPADDR=[url removed, login to view]

GATEWAY=6.9.141.1

/etc/sysconfig/network-scripts # less [url removed, login to view]

# Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet

DEVICE=[url removed, login to view]

VLAN=yes

BOOTPROTO=static

ONBOOT=yes

#NETMASK=[url removed, login to view]

#IPADDR=[url removed, login to view]

#GATEWAY=6.9.141.1

/etc/sysconfig/network-scripts # less [url removed, login to view]

DEVICE=[url removed, login to view]

VLAN=yes

BOOTPROTO=static

ONBOOT=yes

IPADDR=[url removed, login to view]

NETMASK=[url removed, login to view]

/etc/sysconfig/network-scripts # less [url removed, login to view]

DEVICE=[url removed, login to view]

VLAN=yes

BOOTPROTO=static

ONBOOT=yes

IPADDR=[url removed, login to view]

NETMASK=[url removed, login to view]

/etc/sysconfig/network-scripts # less /etc/iproute2/rt_tables

#

# reserved values

#

255 local

254 main

253 default

0 unspec

#

# local

#

#1 [url removed, login to view]

100 [url removed, login to view]

400 [url removed, login to view]

I'm still not able to reach the vlan 400 if I ping it from OUTSIDE of the vlan.

This is a simple project and should not take more than minutes to an hour (if few attempts to fix are done).

The budget for this project is not going to exceed $50, so if you ask for more, you are just going to be ignored.

Good luck to all and happy bidding.

Kỹ năng: Cisco, Linux, Thiết lập Bản thảo, Quản trị hệ thống, UNIX

Xem thêm: bcm5704 linux centos, tree box, static interface, reach local, domain forwarding, cisco connected, broadcom, dot1q linux, m linux, linux m, vlan, server linux admin, reverse bidding, outside box, nic, native script, linux device, ethernet, esxi, simple network project linux, linux install script, esxi server, script tree, ethernet working, cisco server

Về Bên Thuê:
( 36 nhận xét ) New York, United States

Mã Dự Án: #1083610

Đã trao cho:

superkonduktor

i know what is wrong/missing with your setup. See PMB

$45 USD trong 1 ngày
(1 Đánh Giá)
1.3

7 freelancer đang chào giá trung bình $48 cho công việc này

osmanbsd

Please see PM.

$50 USD trong 1 ngày
(86 Đánh Giá)
6.9
techguru91

I am an experienced Network Administrator with CCNA and CWNA ....... Give me a chance to work for you. Please look @ my PM for details.

$50 USD trong 1 ngày
(25 Đánh Giá)
4.6
brND

Please check Your PMB

$50 USD trong 1 ngày
(20 Đánh Giá)
4.6
argento

Hi, please check PMB. Thanks.

$50 USD trong 5 ngày
(12 Đánh Giá)
4.0
IPEXPERT

perhaps you need be careful with term "classes" lot of people will jump to conclusion you are after QoS problem :)

$50 USD trong 1 ngày
(2 Đánh Giá)
3.8
rahul84ipec

I have already done this kind of setup as I am a network Administrator of a national level Data Center.Give me a chance,it's my pleasure to work with you.

$40 USD trong 1 ngày
(0 Đánh Giá)
0.0