Structural Engineer of Record (Florida PE) for Industrial Steel Crane Building

$10000-20000 USD

Closed

Posted 7 days ago

$10000-20000 USD

Paid on delivery

Structural Engineer of Record (Florida PE) for Industrial Steel Crane Building Project Overview We are seeking an experienced Florida Licensed Structural Engineer (PE) or structural engineering firm to serve as the Structural Engineer of Record (EOR) for a new industrial manufacturing facility located in Punta Gorda, Florida. The project consists of a large steel industrial building with overhead bridge cranes and an attached reinforced masonry office. The selected engineer will act as the Florida Structural EOR and provide structural engineering, foundation engineering, permit support, and coordination with the steel building supplier. Civil engineering has been completed and the site development permit has already been issued. Architectural and MEP drawings are substantially complete and will be provided for coordination. Project Description Approximate project components include: 40,000 SF enclosed industrial steel building Approximate dimensions: 100 ft × 400 ft Approximately 70 ft building height Approximately 3,000 SF reinforced CMU office One 30-ton overhead bridge crane One 10-ton overhead bridge crane Crane spans approximately 80-86 ft Integrated crane runway system Large overhead doors Heavy industrial equipment loading Project Delivery Approach The steel building may be supplied by a domestic or international steel building manufacturer. The selected supplier will provide engineered shop drawings and structural calculations for the building system. The Structural EOR will establish design criteria, review delegated design documents, coordinate structural interfaces, and prepare permit drawings and calculations required for Florida permitting. Experience working with steel building suppliers and delegated design packages is preferred. Scope of Services The selected engineer should be capable of performing or coordinating the following: Structural Engineering Structural analysis and calculations Wind load analysis Foundation design Slab-on-grade design Structural anchorage Base plate and anchor bolt design or review Reinforced CMU office structural design Structural load path development Crane Support Engineering Crane runway design Crane support framing Crane load analysis Lateral and longitudinal crane forces Foundation reactions and load transfer Permit Documents Florida PE signed and sealed structural drawings Structural calculations Permit support Plan review responses Design Review and Coordination Review supplier calculations and drawings Review delegated design packages Review structural revisions Review shop drawings Review material substitutions Coordinate accepted revisions into final permit documents Ground Improvement Coordination The site is expected to utilize ground improvement measures based on geotechnical recommendations. The Structural EOR will coordinate foundation design with the geotechnical engineer and ground improvement engineer. Design of the ground improvement system itself is not required unless specifically proposed by the consultant. Design Criteria The project will be designed in accordance with applicable standards including: Florida Building Code ASCE 7 AISC AWS ACI 318 TMS 402/602 MBMA (where applicable) CMAA criteria for overhead cranes The owner's goal is a robust industrial facility designed for long-term service and Florida wind requirements. Preferred Qualifications We are particularly interested in engineers or firms with experience in: Florida Structural EOR services Industrial steel buildings Manufacturing facilities Overhead crane buildings High-wind structural design Foundation engineering Crane runway engineering Pre-engineered metal buildings Delegated design review Florida permitting Please Include When submitting your proposal, please provide: Florida PE license information Company qualifications Resume or project team information Similar completed projects Overhead crane project experience Industrial project examples Florida permitted project examples References Estimated schedule and availability Proposal Format Please submit one of the following: Fixed fee proposal Hourly rate with estimated hours Hourly rate with a not-to-exceed amount Please identify: Included deliverables Assumptions Exclusions Permit support included Construction support included (if any) Bonus Qualifications (Not Required) The following capabilities are a plus: In-house MEP engineering MEP peer review and coordination Shop drawing review Special inspections coordination Ground improvement coordination International fabrication review Crane-specific structural engineering Long-Term Opportunity This facility is expected to be the first of several planned industrial projects. We are seeking a long-term engineering partner for future manufacturing and industrial facilities throughout the United States. Thank you for your consideration. We look forward to reviewing your qualifications and proposal.

Structural Engineering

Civil Engineering

Building Design

Geotechnical Engineering

Industrial Engineering

Engineering

Engineering Drawing

Project ID: 40713995

About the project

12 proposals

Remote project

Active 1 day ago

Looking to make some money?

Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

Get paid for your work

Outline your proposal

It's free to sign up and bid on jobs

12 freelancers are bidding on average $14,650 USD for this job

@umg536

As a Florida Licensed Structural Engineer (PE) with extensive experience in Industrial Steel Buildings and Foundation Engineering, I am confident that I can serve as the ideal Structural Engineer of Record for your project. My work has enhanced manufacturing facilities and created robust industrial structures designed for long-term service - precisely the vision you have for your facility in Punta Gorda. Not only do I strive to meet Florida wind requirements, but I also collaborate closely with ground improvement and geotechnical engineers to ensure cohesive foundation design. My expertise in coordinating with material suppliers matches your need for reviewing structural revisions, shop drawings, and material substitutions. Reviewing delegated design packages and incorporating revisions into final permit documents are tasks that I am very familiar with. Moreover, my work aligns with several critical standards like ASCE 7, AISC, AWS, ACI 318, TMS 402/602, MBMA when applicable; fully embracing the respect for standards that your project demands.

$20,000 USD in 7 days

5.0

(49 reviews)

7.4

@mntaimur

I read your project details. I'm very much interested to do this project. I'm already experience in it. You can check my previous works at my portfolio section. Please message me for further discussion. I'll provide some of my previous work sample. I'll deliver required Design file according relevant code in staad pro software and detailed drawing file in tekla software. You will get complete structural solution of following civil structures: 1. RCC Structures (Residential, Commercial, Industrial) 2. Steel Structures (Shed, Multistoried Mezzanine, Silo etc.) 3. Tower (Transmission, Telecommunication) 4. Poles (Steel, SPC) 5. Bridges (Steel, RCC, Composite) 6. Composite Structures (Residential, Commercial, Industrial) 7. Foundation (Single, Combined, Mat, Pile, SPC, Screw etc.) We work with the following Analysis, Drawing and Modeling software: 1. Staad Pro. 2. Etabs 3. MS Tower 4. Auto CAD 5. RAM Connection 6. SketchUp 7. Tekla 8. Revit 9. Robot 10. Advance Steel 11. ASDIP Foundation 12. SAP 13. Tekla Tedds 14. GRASP 15. Staad Foundation 16. CSI Detailing 17. MIDAS Civil

$10,000 USD in 7 days

4.9

(45 reviews)

6.2

@kashifsani

Dear Sir, I am capable to design and deliver your project in cad, Revit and PDF. I will provide all of the following detail design and drafting for your project. 1. Foundation Plan and Framing 2. Beams and Columns 3. Detailed drawings (Footings) 4. Water Proofing 5. Section Drawings 6. Notes, Legends and more Well Versed in; 1) Reinforced Concrete Structures 2) Steel Structures 3) Wood/timber Structures 4) Light guage steel structure 5) Re-strengthening of Existing RCC structures using carbon fibre 6) Pre-engineered steel Shed 7) Industrial Steel Towers For Design I am using following Software's 1) ETAB 2) SAP2000 3) Staad 4) Tekla Tedd's For drawings and detailing, I am using 1) AutoCAD 2) Tekla 3) Revit

$10,000 USD in 14 days

4.6

(41 reviews)

6.3

@Aaleen110

You need a Florida Structural Engineer of Record for an industrial steel crane building and attached office, and I will prepare the structural drawings and calculations for permit submission. I will design the steel building frame and foundation for the overhead bridge cranes using RAM Structural System for analysis and design, also detailing the reinforced masonry office structure and its foundation in AutoCAD. The steel building supplier's shop drawings will be reviewed for compliance with the design intent and project requirements. I will also prepare the structural calculations and drawings needed for permit application. I would build the steel frame design first because that dictates the foundation loads and dimensions, so getting that right is the starting point for the whole structural system. What is the maximum rated capacity and span for the overhead bridge cranes? Track record on here: 5.0 across 10 reviews, 100% on time and 100% on budget. Please provide the architectural drawings and MEP drawings so I can start the structural design and prepare the final deliverables, and I will send the structural design drawings and calculations once I have them.

$10,000 USD in 21 days

5.0

(2 reviews)

4.1

@mobasherreza10

Hi there, As a Florida PE with professional building design and structural engineering skills, I am well-equipped to exceed your expectations as the Structural Engineer of Record for your industrial steel crane building project. With a unique blend of technical expertise and creative problem-solving skills, I have successfully tackled numerous projects similar to yours. My portfolio boasts diverse high-stake projects including manufacturing facility designs, industrial steel buildings, and overhead crane buildings. As an experienced engineer and the leader of Aesthetic Logic, a renowned digital transformation agency, I possess an extensive array of skills that go beyond traditional engineering roles. This includes familiarity with Florida permitting requirements and having partnered with allies such as geotechnical engineers in coordination efforts similar to this project. Best regards, Mobasher Reza

$15,000 USD in 3 days

5.0

(2 reviews)

2.3

@XRProConnect

Hi, Aashiq here from Cape Town, South Africa. This project instantly caught my eye, so I had to reach out. I see you are looking for a Florida Licensed Structural Engineer to serve as the Engineer of Record for a steel industrial building in Punta Gorda. Your detailed requirements for crane support engineering and foundation design show the complexity of this project, and it sounds like an exciting challenge. I have extensive experience in designing industrial steel structures, including overhead crane buildings, and my past projects have consistently met Florida's rigorous permitting standards. I'm confident I can provide the structural calculations and permit support you need. Feel free to ask for samples of my work. Based on what you mentioned, here is how we would approach the project: - Establish design criteria and perform structural analysis - Coordinate closely with the steel building supplier and geotechnical engineer - Prepare detailed permit drawings and calculations - Ensure all designs comply with Florida Building Code and relevant standards You can count on clear communication and a user-focused solution optimized for performance throughout the project. Best Regards, Aashiq

$18,000 USD in 7 days