...app for android, but if cannot that, an webpage secured with password will be ok. Module need to be connected to a cloud because ip will be dinamic for provider of [đăng nhập để xem URL] gsm network with 4g router and i cannot use port forwarding or dms. Tested! I know manny ways to solve the problem like: RemoteXY, Blink for example, but that will limit me, and
...experience with Asterisk, FreePBX, and automated phone surveys. You will need to install, configure the whole system over SSH connection, the system will use multiple USB modems as GSM trunks. IMPORTANT! I don't want to waste your time, please do the same thing. Our budget limited, we have some system admin experience, we know what we ordering now, in this
...ine_Parameters_Visualization/ As I am quite familiar with RPI - I thought maybe we can use it. But it is not a must, just an idea. There will be some analog inputs and also OBD information as the project vehicle has modern VW engine. I have no idea about hardware (ADC and so on) but I am good at programing and automotive industry. I will buy all necessary
...Control Protocol) 8. Transport Mode TCP, User Datagram Protocol (UDP), TCP to UDP Interworking 9. Codecs G.723, G.729, AMR (Adaptive Multi-Rate Compression), iLBC, G.711, GSM. 10. Network Address Translation (NAT) Traversal Through Encryption & STUN 11. Voice Quality Silence Suppression, Packets Loss Management 12. DTMF - (Dual Tone Multifrequency)
Im looking for someone to make me a tiny Arduino based project which will allow a user to track the person with the device using GPS (GSM board preferably) and also start and pause recording sound using a microphone at a push of a button. The device must also have a buzzer which will beep at certain times
Should have to stitch 10 t-shirts, and the designs will be given by me, cloth will not be provided, it should be bought by the stitcher and the t-shirt cloth should be very high GSM(160 or 170GSM).
The Ilgenfritz Engineer...switch a WLAN access point on and off on MQTT request and the settings are made via MQTT. A captive portal is intended to provide the user with a diagnostic option (for example GSM reception, battery voltage, MQTT connection, ..) After a declaration of confidentiality has been exchanged, we can send the specification sheet.