Arduino data logger lcdcông việc

This project is do design hardware and programming that will run designated frequencies through speakers producing a corresponding audio tone in a specific sequence and then display the information on a LCD screen guiding a operator of the hardware to step through specific sequences and then automatically record the results into a memory device. If you can give me what you think is the approximate number of hours or cost to complete it would be helpful. Please place an initial bid but know that before accepting this project you will have the opportunity to review the full project and adjust your bid accordingly. I currently have some schematics, BOM files, and other work done in Altium I believe. The engineer I had working on this project has become ill and cannot continue with...

I want to log all payloads received to a log file based on the Topic Sent. see doc for more details. Include the words BlueMajic and don't bid more than $35.00 Don't bid more then

Material UI Base...Management: Users (DataGrid, Forms(with Stepper), [new,edit,delete,etc] (includes Take photo from Camera)) Roles/Profiles (DataGrid, Forms permissions(with Stepper), [new,edit,delete,etc] ) Organizations (DataGrid, Forms(with Stepper) [new,edit,delete,etc] ) Audit Log (Table, [new,edit,delete,etc] ) General Configuration: General Configuration (DataGrid, Forms(with Stepper), [new,edit,delete,etc]) Logger (Table, [new,edit,delete,etc] ) Tools: Tag Manager (DataGrid, Forms(with Stepper), [new,edit,delete,etc]) Devices Configuration: My Things (DataGrid, Forms(with Stepper), [new,edit,delete,etc]) Top Bar: My profile ( Forms(with Stepper), [new,edit,delete,etc] ) My Account ( Forms (with Stepper), [new,edit,delete,etc] ) Dynamic API Menu with permissio...

I need a timer that is activated with a limit switch. - When the limit switch is pressed, a timer/clock starts to count time. When the switch is unpressed, the timer pauses but does not lose time. When the limit switch is pressed back in, the timer resumes counting up. - Time is shown on a large display that can be seen from 20-30 feet away. - The timer automatically starts at 8:10am - The timer automatically stops at 4:30pm even if the limit switch is pressed in. - If the limit switch is pressed in anytime between 12:00pm-12:30pm then the timer should be paused during that time. But have this option to where it can be turned off, or explain what code would need to be removed to do so. - A second limit with that resets the timer back to 0 when pressed in, but is unable to reset it...

Write up a class for LED that provides basic functions like on/off, blink, fade, pwm. The code must be non-blocking and work on Arduino. For example, I will call (on,3sec, pwm 75%). I will provide class template and list of required functions. This should be a very quick job if you have the right skills. This will lead to many more similar jobs. Please provide your best cost/time estimate. Thank you !

Hey there, I recently brought that micro controller, and I am having big issues with it. Basically any project on Uno, I can not run on Portenta for some reason. Thus the whole thing is turned into kind of frustrating experience. Here are some of the issues that I have: 1. I2c connection with 5V Arduino 2. Serial communication with 5V Arduino 3. Using 5V LPD3806 with Portenta Only people with good command of English. Generic reviews will not be considered. Thank you!

Looking for someone who’s using Linux, arduino, and digispark

He pensado en Arduino, pero quizás me recomiendan otro sistema mejor y económico, para Grabar la señal de dos cámaras de video y enviarlas a un FTP. Necesitaré dos señales de video, pero quizás si no es posible hacerlo y solo puedo usar una , también sería válido. El formato de grabación debería ser de calidad, h264 o mp4.. por ejemplo. Sería perfecto si la señal de las dos cámaras de video fuera partida en la pantalla, algo así como las cámaras de vigilancia. mitad de la pantalla para una señal y la mitad para la otra. Resumiendo.. Que haga lo mismo que sistema de grabación de vigilancia, pero solo con dos cámaras- Graba cuando pulsamo...

Arduino mega software and gui

create design and form by making renderings for new front covers for 8 different models solar inverter We supply stp file from backside, we supply stp file from front covers and LCD/LED and some form ideas. The front cover suggestion of design we send. The covers are made of aluminum. We expect a family-group of the 8 sizes designs by high resolution renderings.

Add internet control to WiFi (ESP-32) 10-person home/office automation Arduino based project -- now working well. Serve as editor, mentor, consultant for me for related projects planned over the next several quarters. Effective English writing skills are important. Think about spending two hours every-other week with more at times. See current code below.

Sleep Apnea Monitor I have developed a mask/monitor, using an Arduino Uno. When I'm sleeping and I stop breathing, a buzzer alerts me to start breathing again. Due to power requirements and the weight of the Arduino, only the wind sensor and buzzer are mounted on the mask. These are connected by five-foot wires to the Arduino, which in turn is connected to a 110-volt outlet. The goal of this project is to eliminate the wires and create a wearable mask with all components on the mask. This means reducing the weight, powering it with a rechargeable battery and transferring data wirelessly. The Current Approach I have a wind -sensor mounted on a mask. When the user stops breathing, the number of minutes they've been breathing properly, when they s...

Necesito programar el Nodemcu esp8266 Arduino para que envíe a través de wifi las pulsaciones de 2 botones distintos a una base datos instalado en mi Nas Synology. Y otro de botón de reset para poner los contadores de las pulsaciones a 0. Debe de disponer de un pin que cuando llegue corriente indique que el aparato entre encendido. En la base de datos deben figurar Id. Fecha y hora del conteo de los botones, en número de veces pulsados los botones y fecha y hora de encendido y/o apagado, realmente no creo que las conexiones sean así como aparecen en las fotos, por eso necesito un experto

...zmmailboxdmgr[16034]: no manager process is running Dec 6 22:37:04 mail zmconfigd[6470]: Executed: /opt/zimbra/bin/zmmailboxdctl status norewrite returned 1 (25 - 13) (0.03 sec) Also here is the service status right now: [zimbra@mail ~]$ zmcontrol status Host amavis Running cbpolicyd Running dnscache Running ldap Running logger Running mailbox Stopped zmmailboxdctl is not running. mta Running opendkim Running proxy Running service webapp Stopped zmmailboxdctl is not running. snmp Running spell Running stats Running zimbra webapp Stopped ...

I have a small vertical garden supplied with water from a 40 l container (upper left, in video) run through a set of gardena hoses. It's currently turned on and off manually. However, I would like that to programmable for...gardena hoses. It's currently turned on and off manually. However, I would like that to programmable for when on vacation. The problem, however is that the gravity-pressure from the container is not large enough to push through most of-the-shelf systems, I think, probably because they are these tight electromagnetic valves. I therefore want to buy a solution that can overcome this. I call it an Arduino-controlled ball-valve because I think that would be a neat solution, but really anything you suggest that convincingly sounds like it would work is somet...

Hello,i am looking for guys to build me an website for my startup which set to make development board (similar to Arduino) . The site would be hosting the board details and won't do sales/retail work. I would share the model site via chat. The site should work effectively when accessed through both mobile and pc.

I want someone to write code in Arduino App for the attachment below

All I need is help making the motors move. There is starter code with lots of information and implementation in it already.

C code with Arduino UNO 1. Switches SS S1 S2 S3 S4 These switches should be (OFF). Before start next steps delay for (1) minute. 2. Internal Alarm (ON) for (15) second then turn (OFF). 3. Sound Sensor (ON) when detect sound turn (ON) the External Alarm until any of the switches SS,S1,S2,S3,S4 turned (ON) then turn (OFF)the sensor and the Alarm. 4. Motion Sensor (ON) when detect movement turn (ON) the External Alarm until any  of the switches SS,S1,S2,S3,S4 turned (ON) then turn (OFF)the Sensor and the Alarm.  5. When any switch is (ON) turn the alarms and sensors (OFF). // Please put your notes and pins number or any additional explanation.

MPU6050 sensors Arduino Bid if you have sensors for testing

your task will be to create an Arduino sketch to calculate the closest combination possible to a target sum input will be as follows an array of floats, the target value, the min limit, and the max limit. this should take a few hours so please don't bid for 7 days and no this is not a $150 project

hi, i need help to build a bartender with a nema17 stepper motor and a Linear guide and 1 servo. i already have a idea of how it should work . i need help to chose the correct components (stepper driver, Arduino or Raspberry pi ect...) you will have to help me choose the right components and help me write the code for the project to move forward. i already have: - arduino uno - raspberry pi 3/4 - linear guide - stepper motor - drivers (TMC2208,DRV8825) I have a preference for the raspberry pi and python Maybe only weekend we will be working on this projet, i'm not in a hurry, the goal is to learn at the same time I speak french and english if you have any questions, do not hesitate to ask questions in private in order to fully understand my needs

Have an idea that I'd like to pursue - need someone familiar with arduino projects.

...obtain: - Complete technical drawing. - Arduino program, containing comments for understanding the flow. - List of recommended components, cables, boards, motors, other elements deemed necessary for future purchase. The idea is to have two Servo Motors and a DC motor. The DC motor in the center, axis C, image attached, being powered by a current that will pass through a Slip Ring Connector B. Such Slip Ring Connector turns from axis B, which represents the second servo motor, also powered by current that will pass through Slip Ring Connector A, coming from A. The DC motor will be activated as soon as the Arduino is connected to the power source. Servo motors will be driven clockwise and anti-clockwise according to 4 Push Buttons connected to Arduino Board. In the...

...obtain: - Complete technical drawing. - Arduino program, containing comments for understanding the flow. - List of recommended components, cables, boards, motors, other elements deemed necessary for future purchase. The idea is to have two Servo Motors and a DC motor. The DC motor in the center, axis C, image attached, being powered by a current that will pass through a Slip Ring Connector B. Such Slip Ring Connector turns from axis B, which represents the second servo motor, also powered by current that will pass through Slip Ring Connector A, coming from A. The DC motor will be activated as soon as the Arduino is connected to the power source. Servo motors will be driven clockwise and anti-clockwise according to 4 Push Buttons connected to Arduino Board. In the...

Need someone to work with me for App developments in flutter for many projects in future.

Gostaria de montar um sistema de segurança para controle de acesso dos elevadores de um apartamento com arduino, o prototipo precisa ter um controle de andares com RFID.

IoT ABM & monitoring software to control many geographical distributed devices, in one centralized application for remote control, ABM, monitoring and reporting. Workflow: ABM & Monitoring app <---> Gateway <---> Devices (for example camaras, sensors, etc...) It may be necessary use of Arduino, C++ , although its open to the best technology/solution you propose. MVP budget: ~USD 500

Hi I want to send if there is motion measured with the accelometer. I use the BLE sense with integrated accelometer. The accelometer is working . also send advert data is working. Only I am nog able to send dynamic values for this one: completeRawAdvertisingData[] = {0x02,0x01}; So need the sketch changed so I can send both 0x02,0x01 (if motion) and 0x01,0x02, (if no motion) See code below: #include <ArduinoBLE.h> //************** #include <LSM6DS3.h> #include <Wire.h> //Create a instance of class LSM6DS3 LSM6DS3 myIMU(I2C_MODE, 0x6A); //I2C device address 0x6A float aX, aY, aZ, gX, gY, gZ; const float accelerationThreshold = 1.5; // threshold of significant in G's const int numSamples = 60; int samplesRead = numSamples; //******************* BL...

I have a code that works perfect with SIM5300E, I am looking for someone to modify it and makes work with SIM7000G… I have tested the GPRS registration with SIM7000G, it works almost fine; but it needs extra work to make it more reliable… I am using TinyGSM libraries and other Arduino libraries… My board has STM32 and I am using platformIO with Arduino environment to build my code…

This project is a time sensitive placement test creating a circuit or two for one hour staring 9 am Malaysia time 2 December

I need code, the code has 4 combinations and an LEDdisplay which is ok when the correct 4 digit number is entered I want to turn on 1 LED and I want it to stay on, when the 2nd correct number is entered I want another LED to light and stay on the same with 3 & 4, then I need a code to reset it too, the LED's can be turned on with a relay if you need,

Creation of up to 10 slides for in store TV Signage. Correct format - 1920 x 1080, 16:9 . Some artwork provided that will require formatting .

Hello developers I need help setting up servo motor with ESP32 s2. Will discuss more details in chat. Thanks.

I would connect Telegram with arduino mkr 1010 with a telegram bot

I'm looking for some car canbus expert to find out a way to get wheel rotation from canbus OBD standard in order to work on all cars Or find out specific canbus frames for multiple cars I'm trying to get wheel rotation or ABS pulses from canbus If you don't understand the project or you don't know if you can make or not don't bid on the project

I have a Arduino code whic includes two NRF24L01 wireless modules. I have one error but I can not resolve it. I need help today. The code will be posted to you after.

Vui lòng Đăng Ký hoặc Đăng Nhập để xem thông tin.

we need to to generate a firmware wifi / bluetooth /cloud services for mobile APP. The firmware has to be indipendent from Arduino applications . Free rtos . Eclipse

We're looking for an experienced and skilled Arduino/C Embedded Developer who can develop just the firmware for our Agritech IoT devices to be commercialised in a farming/agriculture setting. *** PRODUCT SUMMARY *** - Consists of TWO types of devices: the "Gateway" which is a Internet-facing (WiFi) device which communicates with API, and, anywhere from 20-50x "Nodes" communicating with the Gateway via a on-site mesh network (ZigBee) - Both Gateway and Node are virtually identical in hardware components and design, where both utilise their respective I/O channels to either operate agricultural sensors or irrigation valves - Customers will DIY setup their devices on their farms, by connecting to each device's Bluetooth and providing the device with wha...

We're looking for an experienced and skilled Arduino/C Embedded Developer who can develop just the firmware for our Agritech IoT devices to be commercialised in a farming/agriculture setting. *** PRODUCT SUMMARY *** - Consists of TWO types of devices: the "Gateway" which is a Internet-facing (WiFi) device which communicates with Web API, and, anywhere from 20-50x "Nodes" communicating with the Gateway via a on-site mesh network (ZigBee) - Both Gateway and Node are virtually identical in hardware components and design, where both utilise their respective I/O channels to either operate agricultural sensors or irrigation valves - Customers will DIY setup their devices on their farms, by connecting to each device's Bluetooth and providing the device wit...

I have a code that works perfect with SIM5300E, I am looking for someone to modify it and makes work with SIM7000G… I have tested the GPRS registration with SIM7000G, it works almost fine; but it needs extra work to make it more reliable… I am using TinyGSM libraries and other Arduino libraries… My board has STM32 and I am using platformIO with Arduino environment to build my code…

we need to to generate a firmware wifi / bluetooth /cloud services for mobile APP. The firmware has to be indipendent from Arduino applications . Free rtos . Eclipse

I have a linier actuator with optical feedback and pwm control. The goal: To extend and retract between two encoder points user definable in the code. Homing on powerup required. Single momentary button (use a counter for extend and retract?) Details Upon extending the actuator will stop at a defined point with a timed delay, then continues to extend to the final encoder count stop point. When it gets close to the stopping point the actuator must slow for a soft stop. Pressing the button a second time will retract the actuator to a final retracted encoder point, soft stopping as well.

I have a sketch which I would like adapted to work with a new LCD Keypad Screen. Please note, new buttons on screen keypad has an additional button (select) which I would like to now use. // New Screen //

Hello, I need to develop a code for an esp8266 project in which = Read the IR sensor and when active, start the servo motor, when inactive, return to the starting position. (During each status, trigger an LED as well) If the ultrasound is at a distance of 8 cm, it is in a condition to check if the load cell is above 4 kg and if so, activate a led. Check if the weight is still ab...inactive, return to the starting position. (During each status, trigger an LED as well) If the ultrasound is at a distance of 8 cm, it is in a condition to check if the load cell is above 4 kg and if so, activate a led. Check if the weight is still above 4kg after 5 days, if so, activate an LED. Its similiar with this project =

Code need to work on Arduino IDE with espressif/arduino-esp32 1.0.6 I need to detect a very fast pulse end moment (10-15ms lenght) but since ESP32 takes +200ms to start up, it's must be done from wake stubs 1. Esp32 it's in deep sleep or hibernation mode 2. HIGH pulse interrupt and wake up 3. Wake stub looking for LOW/Falling 4. Wake stub detect LOW/Falling , take the time into variable and wake up as normal 5. Normal operation, print how many microseconds elapesed from LOW time Note: Your stub code must be boot up in less 10ms, otherwise it will not be able to capture the moment from HIGH to LOW Use what ever gpio number for interrupt (DEVKIT-C) Image included for better understanding

Hello there! I need someone to help me with a Nextion+Arduino project that I am working on. What I want you to do is to check the files that I have already made using Nextion Editor and Arduino to talk to each other. I'd like you to check them, improve them in terms of looks, operation and help me with what's undone. Basic idea is we have a display and Arduino and we want them to talk to each other all time and make the changes on Arduino side, I also have an I2C based battery fuel gauge IC so I'd like you to help me to track it's SOC as well. If you are someone who has worked with Nextion Displays and can do this, kindly bid. I'd prefer it if you have the display at your end and can test the firmware on Arduino and test the HM...

...the Wifi has been set, the board shall remain connected to the chosen wifi network, and if the connection is lost, it should be able to try connecting again at regular intervals until the connection is restored - If, for some reason, the board freezes or goes idle, it has to be able to reset by itself, looking again for the connection Additional conditions: - The code must be uploaded using the Arduino IDE - Provide in advance the list of necessary libraries (if any) - The code must open the possibility to develop the code further using sensors and making HTTP calls over the internet. - indicate if buttons must be introduced in the project (and how many) to reset or access the wifi configuration page (if necessary - better if it can be avoided). Please ask questions if you want...

ipk: We are in the final stage of development and there are few issues which are required to be resolved, for this we are looking for a python developer who had prior experience working in IoT, lora and mqtt service, Problem Statement 1- We are able to send the command by manually pressing button from...device in aws and then it will be sent to the device and that schedule will be saved to run everyday until any change made in those times lots in the application, Action point :- Schedule the execution of function on daily basis, while getting time slots from app once and — function should run everyday until there is change from the app, 2- Integration of physical buttons with either with Arduino or rugged board, which will execute a function when a button is pressed...