Tracker with sim808 module + wifi module and 8MHz Arduino mini pro, mysql

Tracker with sim808 module + wifi- esp8266, and 8MHz Arduino mini pro, mysql - Arduino code (SLEEP-GPS-GSM-WIFI-CELL) - Web interface whit google map, + password access for various user - Mysql to store all the data - GSM-wifi database, or KEY ( like cellidfinder ) User have to log-in to the web page and see on the map in real time his device or multiple devices User must be able to: - Store and delete 2 mobile phone numbers by SMS - Request from web page to turn ON a LED - Request from web page The result of AT+CNETSCAN. - Request from web page The wifi position. AT+CWLAP - User must be able to see the last 24 hours GPS, GSM position The module should send every 30 second the GPS location, if not GPS available then GSM position, And Store this data in Mysql. Arduino Send to the webpage by user request the result of ( AT + CNETSCAN 1(lac, cid, operators, ...) 2 of each available operator whit the hightes Rxlev.) Arduino Send to the webpage by user request the result of AT+CWLAP ( 3 wifi ) The module should listen receiving SMS, as it receives an SMS with specific word must activate a PIN on Arduino, - Arduino must send a text SMS to the stored Phone number when arduino goes On - Arduino Send all the data for 3 hours, after 3 hours arduino go to deep sleep (0,001mah) and wake up every 6 hours for 7 minutes and send GPS data – GSM data - CNETSCAN data – WIFI data, All the data must be saved in MYSQL database. the project is already started, and must interface with my existing project, I send you more accurate info by pdf document Whit AT Commands and connection any advice and suggestions will be greatly appreciated ... NOTE: no use library of any existing arduino GPS or gprs shield . Use Only AT command